ADS1247IPWR – 5.25V 24-Bit 2kSPS 4-Ch Delta-Sigma With PGA ADC IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x ADS1247IPWR – 5.25V 24-Bit 2kSPS 4-Ch Delta-Sigma With PGA ADC IC SMD-20 Package

MCP3201-CI/P 12-Bit A/D Converter (ADC) with SPI Interface IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x MCP3201-CI/P 12-Bit A/D Converter (ADC) with SPI Interface IC DIP-8 Package

MCP3008 8-Channel 10-Bit A/D Converter with SPI Interface IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x MCP3008 8-Channel 10-Bit A/D Converter with SPI Interface IC DIP-16 Package

ADC0809 8-Bit A/D Converter with 8-Channel Multiplexer IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x ADC0809 8-Bit A/D Converter with 8-Channel Multiplexer IC DIP-28 Package

MCP41010-I/SN – 5.5V 10K 256Taps Digital Potentiometer SPI Interface IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x MCP41010-I/SN – 5.5V 10K 256Taps Digital Potentiometer SPI Interface IC SMD-8 Package

The CD4066B device is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with the CD4016B device but exhibits a much lower on-state resistance. In addition, the on-state resistance is relatively constant over the full signal-input range.

The CD4066B device consists of four bilateral switches, each with independent controls. Both the p and the n devices in a given switch are biased on or off simultaneously by the control signal. As shown in Figure 17, the well of the n-channel device on each switch is tied to either the input (when the switch is on) or to V_SS (when the switch is off). This configuration eliminates the variation of the switch-transistor threshold voltage with the input signal and, thus, keeps the on-state resistance low over the full operating-signal range.

The advantages over single-channel switches include peak input-signal voltage swings equal to the full supply voltage and more constant on-state impedance over the input-signal range. However, for sample-and-hold applications, the CD4016B device is recommended.

Features and Specifications:

1. 15-V Digital or ±7.5-V Peak-to-Peak Switching
2. 125-Ω Typical On-State Resistance for 15-V Operation
3. Switch On-State Resistance Matched to Within 5 Ω Over 15-V Signal-Input Range
4. On-State Resistance Flat Over Full Peak-to-Peak Signal Range
5. High On or Off Output-Voltage Ratio: 80 dB Typical at f_is = 10 kHz, R_L = 1 kΩ
6. High Degree of Linearity: <0.5% Distortion Typical at f_is = 1 kHz, V_is = 5-V_p-p V_DD – V_SS ≥ 10-V, R_L = 10 kΩ
7. Extremely Low Off-State Switch Leakage, Resulting in Very Low Offset Current and High Effective Off-State Resistance: 10 pA Typical at V_DD – V_SS = 10-V, T_A = 25°C
8. Extremely High Control Input Impedance (Control Circuit Isolated From Signal Circuit): 10¹² Ω Typical
9. Low Crosstalk Between Switches: –50 dB Typical at f_is = 8 MHz, R_L = 1 kΩ
10. Matched Control-Input to Signal-Output Capacitance: Reduces Output Signal Transients
11. Frequency Response, Switch On = 40 MHz Typical
12. 100% Tested for Quiescent Current at 20-V
13. 5-V, 10-V, and 15-V Parametric Ratings

Package Includes:

1 x CD4066-BE 20-V 1:1 (SPST) 4-channel analog switch IC