Ai-Thinker TG-12F Wi-Fi + BLE 5.0  is a module developed based on the Pingtou TG7100C WiFi+BLE chip. The module has a built-in 2MB Flash , adopts 2.4G WiFi 802.11b/g/n and BLE5.0 baseband/MAC design, with high performance, Low-cost, agile development characteristics. It is suitable for the development of low-power and high-performance applications. It is also an integrated solution that can be directly connected to Tmall Wizard. Its microcontroller subsystem includes a low-power 32-bit RISC CPU, cache, and memory. The low-power mode can be controlled through the power management unit. At the same time, it can support up to AES 256-bit encryption engine and has a variety of security features.
In terms of software, pre-integrated standard firmware directly connected to Tmall Elf, and customizable SDK, can assist terminal products to pass Elf Magic/Elf Smart Control certification.
The chip has built-in 276 KB SRAM and 128 KB ROM.
TG-12F/01M provides a wealth of peripheral interfaces, including DSIO, SPI, I2C, IR remote, PWM, ADC, DAC, PIR and GPIO interfaces.

TG-12F/01M has a variety of unique hardware safety mechanisms. The hardware encryption accelerator supports AES 128/192/256-bit encryption engine, SHA-1/224/256, true random number generator (TRNG), public key accelerator (PKA), etc., which can be perfectly applied to various encryption products.

TG-12F is a module based on Tmall TG7100C WiFi+ BLE chip, which is designed with 2.4 G frequency band, WiFi 802.11b/g/n and BLE5.0 baseband/MAC designed, with high performance, low cost, quick and easy development characteristics. Suitable for low power consumption and high performance application development, and is also an integrated solution that can connect Tmall Genie directly.
The micro controller subsystem consists of low power 32-bit RISC CPU、 cache and memory. It can control low power mode through power management unit. At the same time, it can support AES 256 bit encryption engine and has many security characteristics.
For Software, pre-integrated Tmall Giene standard firmware , support customizable SDK, and to assist terminal products through the Tmall giene control certification.

Features:

1.  TG-12F chip is 32-bit RISC CPU with FPU (floating point unit), operating frequency up to 192 MHz. The chip has built-in 276 KB SRAM and 128 KB ROM.
2. Support SDIO/SPI/UART/I2C/IR remote/PWM/ADC/DAC/PIR/GPIO interface.
3. SMD-22 package
4. Integrated Wi-Fi MAC/ BB/RF/PA/LNA
5. Support multiple sleep modes, deep sleep current is less than 30uA
6. Support UART port local upgrade and remote firmware upgrade (FOTA)
7. General AT commands can be quick and easy use
8. Support secondary development, integrated Linux development environment

packages Includes: 

1 x Ai-Thinker TG-12F Wi-Fi + BLE 5.0 Module

Ai WB2 12S is a Wi Fi&BT module developed by Shenzhen Ai Thinker Technology Co., LTD. The module is equipped with BL602 chip as the core processor and supports Wi Fi 802.11b/ g/n protocol and BLE 5.0 protocol. The BL602 chip has a low power 32 bit RISC CPU, 276KB RAM, and a wealth of peripheral interfaces, including SDIO, SPI, UART, I2C, IR Remote, PWM, ADC, DAC, PIR and GPIO etc. It can be widely used in Internet of Things (IoT), mobile devices, wearable electronic devices, smart home and other fields.

Features:

1. The package is SMD 16
2. Support IEEE 802.11 b/g/n protocol
3. Wi-Fi Security Support WPS/WEP/WPA/WPA2 Personal/WPA2 Enterprise/WPA3
4. Support 20MHz bandwidth and Max rate is 72.2 Mbps
5. Bluetooth BLE 5.0, Bluetooth Mesh
6. Support Station + BLE mode Station + SoftAP + BLE mode
7. Support 32-bit RISC CPU276KB RAM
8. Secure start-up supports mirroring with ECC 256 signature
9. Support QSPI/SPI Flash On The Fly AES Decryption, support AES 128 CTR mode
10. Support AES 128/192/256-bit encryption engine
11. Support SHA 1/224/256
12. Support true Random number generator (TRNG)
13. Public key Accelerator (PKA), supports a large number of basic operations, the software provides a signature, verification, and other application program interface
14. Support SDIOSPIUARTI2CIR remotePWMADCDACPIRGPIO etc
15. Integrated Wi-Fi MAC/BB/RF/PA/LNA/BT
16. Support a variety of sleep modes, deep sleep current 12μA
17. Universal AT instruction for a quick start
18. Support secondary development, integrated Windows, and Linux development environment

Specifications:

1. Model: Ai WB2 12S
2. Package: SMD 16
3. Size: 24.0*16.0*3.1(±0.2)mm
4. Antenna on board: PCB antenna
5. Frequency: 2400 ~ 2483.5MHz
6. Operating temperature: 40℃ ~ 85℃
7. Storage temperature 40℃ ~ 125℃, < 90%RH
8. Power supply Support voltage: 2.7V ~ 3.6V,
9. Supply current: ≥500mA
10. Interface: UART/GPIO/ADC/PWM/I2C/SPI IO 11 UART rate Default 115200 bps
11. Security: WPS/WEP/WPA/WPA2 Personal/WPA2 Enterprise/WPA3
12. Flash: Default 2MByte, MAX support 16MByte

Package Includes:

1 x Ai-Thinker Ai-WB2-12S Module

Ai WB2 32S Kit is a development board designed for Ai WB2 32S modules. Ai WB2 32S is a Wi-Fi & BT module developed by Shenzhen Ai Thinker Technology Co., Ltd. The module is equipped with a BL602 chip as the core processor and supports Wi-Fi 802.11b/g/n protocol and BLE 5.0 protocol. The BL602 chip has a built-in 32-bit RISC CPU with low power consumption, 276KB RAM, and a wide range of peripheral interfaces, including SDIO, SPI, UART, VDC, IR remote, PWM, ADC, DAC, PIR, and GPIO. It can be widely used in the Internet of Things (IoT), mobile devices, wearable electronic devices, smart homes, and other fields.

Features:

1. DIP 38 package
2. Supports IEEE 802.11 B/g/n protocol
3. Wi-Fi security supports WPS/WEP/WPA/WPA2 Personal/WPA2 Enterprise/WPA3
4. Supports 20MHz bandwidth with a maximum speed of 72.2 Mbps
5. Bluetooth BLE 5.0, Bluetooth Mesh
6. Supports Station + BLE mode, Station + SoftAP + BLE mode
7. Supports 32-bit RISC CPU and 276KB RAM
8. Secure Startup. Images with ECC 256 signatures are supported
9. Supports real-time AES decryption (OTFAD) in QSPI and SPI Flash, and supports AES 128 CTR mode
10. Supports AES 128, 192, and 256-bit encryption engines
11. Supports SHA 1/224/256
12. Real random number generator (TRNG)
13. The public key accelerator (PKA) supports large numbers of basic operations. The software provides application interfaces such as signature and verification.
14. Supports SDIO, SPI, UART, VDC, IR remote, PWM, ADC, DAC, PIR, and GPIO
15. Integrated Wi-Fi MAC/BB/RF/PA/LNA/BT
16. Supports multiple sleep modes with a deep sleep current of 12μA
17. Quick Start of universal AT commands
18. Supports secondary development and integrates Windows and Linux development environments

Specifications:

1. Model: Ai WB2 32S Kit
2. Package: DIP 38
3. Size: 55.05*25.4(±0.2)mm
4. Antenna On Board: PCB antenna
5. Frequency: 2400 ~ 2483.5MHz
6. Operation temperature: 40℃ ~ 85℃
7. Storage environment: 40℃ ~ 125℃, < 90%RH
8. Power supply Supply voltage: 3.3V or 5V
9. Power supply current: 500mA
10. Interfaces: UART/GPIO/ADC/PWM/I2C/SPI
11. I/O: 15
12. Serial port rate Default value: 115200 bps
13. Security: WPS/WEP/WPA/WPA2 Personal/WPA2 Enterprise/WPA3
14. Flash: Default: 4MByte

Package Includes:

1 x Ai-Thinker Ai-WB2-32S Kit

Ai WB2 13 Kit is a development board designed for Ai WB2 13 modules. Ai WB2 13 is a Wi Fi & Bluetooth module developed by Shenzhen Ai Thinker Technology Co., Ltd. The module is equipped with BL602 chip as the core processor and supports Wi Fi 802.11b/g/n protocol and BLE 5.0 protocol. The BL602 chip has a built in 32 bit RISC CPU with low power consumption, 276KB RAM, and a wide range of peripheral interfaces, including SDIO, SPI, UART, VDC, IR remote, PWM, ADC, DAC, PIR, and GPIO. It can be widely used in Internet of Things (IoT), mobile devices, wearable electronic devices, smart home and other fields

Features:

1. DIP 30 package
2. Supports IEEE 802.11 B/g/n protocol
3. Wi Fi security supports WPS/WEP/WPA/WPA2 Personal/WPA2 Enterprise/WPA3
4. Supports 20MHz bandwidth with a maximum speed of 72.2 Mbps
5. Bluetooth BLE 5.0, Bluetooth Mesh
6. Supports Station + BLE mode, Station + SoftAP + BLE mode
7. Supports 32 bit RISC CPU and 276KB RAM.
8. Secure Startup. Images with ECC 256 signatures are supported.
9. Supports real time AES decryption (OTFAD) in QSPI and SPI Flash, and supports AES 128 CTR mode
10. Supports AES 128, 192, and 256 bit encryption engines
11. Supports SHA 1/224/256
12. Real random number generator (TRNG)
13. The public key accelerator (PKA) supports large numbers of basic operations. The software provides application interfaces such as signature and verification
14. Supports SDIO, SPI, UART, VDC, IR remote, PWM, ADC, DAC, PIR, and GPIO
15. Integrated Wi Fi MAC/BB/RF/PA/LNA/Bluetooth
16. Supports multiple sleep modes with a deep sleep current of 12μA
17. Quick Start of universal AT commands
18. Supports secondary development and integrates Windows and Linux development environments

Specifications:

1. Model: Ai WB2 13Kit
2. Package: DIP 30
3. Size: 49.66*25.40(±0.2)mm
4. Antenna On Board: PCB antenna
5. Frequency: 2400 ~ 2483.5MHz
6. Operation temperature: 40℃ ~ 85℃
7. Storage environment: 40℃ ~ 125℃, < 90%RH
8. Power supply Support voltage: 3.3V or 5V
9. Power supply current: ≥500mA
10. Interfaces: UART/GPIO/ADC/PWM/I2C/SPI
11. I/O: 11
12. UART rate: Default value: 115200 bps
13. Security: WPS/WEP/WPA/WPA2 Personal/WPA2 Enterprise/WPA3
14. Flash: Default: 4MByte

Package Includes:

1 x Ai-Thinker Ai-WB2-13 Kit

Ai-WB2-13U is a Wi-Fi&BT module developed by Shenzhen Ai-Thinker Technology Co., LTD. The module is equipped with BL602 chip as the core processor and supports Wi-Fi 802.11b/ g/n protocol and BLE 5.0 protocol. The BL602 chip has a low-power 32-bit RISCCPU, 276KB RAM, and a wealth of peripheral interfaces, including SDIO, SPI, UART, I2C, IR Remote, PWM, ADC, DAC, PIR and GPIO etc. It can be widely used in Internet of Things(IoT), mobile devices, wearable electronic devices, smart home and other fields.

Features:

1. The package is SMD-18Support IEEE 802.11 b/g/n protocol
2. Wi-Fi Security Support WPS/WEP/WPA/WPA2 Personal/WPA2 Enterprise/WPA3 Support 20MHz bandwidth and
3. Max rate is 72.2 Mbps
4. Bluetooth BLE 5.0, Bluetooth Mesh
5. Support Station + BLE mode、Station + SoftAP + BLE mode
6. Support 32-bit RISC CPU，276KB RAM
7. Secure start-up, supports mirroring with ECC-256 signature
8. Support QSPI/SPI Flash On-The-Fly AES Decryption, support AES 128 CTRmode
9. Support AES 128/192/256-bit encryption engine
10. Support SHA-1/224/256
11. Support true Random number generator (TRNG)
12. Public key Accelerator (PKA), support large number basic operations, software providessignature, verification and other application program interface
13. Support SDIO，SPI，UART，I2C，IR remote，PWM，ADC，DAC，PIR，GPIOetc Integrated Wi-Fi
14. MAC/BB/RF/PA/LNA/BT
15. Support a variety of sleep modes, deep sleep current 12μA
16. Universal AT instruction for quick start
17. Support secondary development, integrated Windows, Linux development environment

Specifications:

1. Model: AI-WB2-13U
2. Package: SMD-18
3. Size: 14.0*18.0*3.1(±0.2)mm
4. Antenna: IPEX connector
5. Frequency: 2400~2483.5MHz
6. Operating temperature: -40℃ ~ 85℃
7. Storage temperature: -40℃ ~ 125℃, < 90%RH
8. Power supply Support voltage: 2.7V ~ 3.6V,supply current ≥500mA
9. Interface: UART/GPIO/ADC/PWM/I2C/SPI
10. IO: 11
11. UART rate: Default 115200 bps
12. Security: WPS/WEP/WPA/WPA2 Personal/WPA2 Enterprise/WPA3
13. Flash: Default 4MByte,Support expansion

Package Includes:

1 x Ai-Thinker Ai-WB2-13U Module

Ai-WB2-01S is a Wi-Fi & BLE module developed by Shenzhen Ai-Thinker Technology Co., Ltd. This module is equipped with BL602 chip as the core processor and supports Wi-Fi 802.11b/g/n protocol and BLE 5.0 protocol. The BL602 chip has a built-in 32-bit RISC CPU with low power consumption and 276KB RAM. It can be widely used in the Internet of Things (IoT), mobile devices, wearable electronic devices, smart homes, and other fields.

Features:

1. DIP-8 package
2. Supports IEEE 802.11 B/g/n protocol
3. Wi-Fi security supports WPS/WEP/WPA/WPA2 Personal/WPA2 Enterprise/WPA3
4. Supports 20MHz bandwidth with a maximum speed of 72.2 Mbps.
5. Bluetooth 5.0, Bluetooth Mesh
6. Supports Station + BLE mode, Station + SoftAP + BLE mode
7. Supports 32-bit RISC CPU and 276KB RAM
8. Secure Startup supports Images with ECC-256 signatures
9. Supports real-time AES decryption (OTFAD) in QSPI and SPI Flash, and supports AES
   128 CTR mode
10. Supports AES 128, 192, and 256-bit encryption engines
11. Supports SHA-1/224/256
12. Support True Random Number Generator (TRNG)
13. Public Key Accelerator (PKA), supports a large number of basic operations, and software provides
    a signature, verification, and other application program interface
14. Supports UART, PWM,ADC, and GPIO
15. Integrated Wi-Fi MAC/BB/RF/PA/LNA/BT
16. Supports multiple sleep modes with a deep sleep current of 12μA
17. Universal AT instruction for a quick start
18. Supports secondary development and integrates Windows and Linux development
    environments

Specifications:

1. Model: Ai-WB2-01S
2. Package: DIP-8
3. Size: 14.5*24.5*11.2(±0.2)mm
4. Antenna on-board: PCB antenna
5. Frequency: 2400 ~ 2483.5MHz
6. Operating temperature: -40℃ ~ 85℃
7. Storage temperature: -40℃ ~ 125℃, < 90%R
8. Power supply Power supply voltage: 2.7V ~ 3.6V, power supply current
   ≥500mA
9. Interface: UART/GPIO/ADC/PWM
10. IO: 3
11. UART: rate Default value: 115200 bps
12. Security: WPS/WEP/WPA/WPA2 Personal/WPA2 Enterprise/WPA3
13. Flash: Default 2MByte Support expansion

Package Includes:

1 x Ai-Thinker Ai-WB2-01S Module