Ai-Thinker ESP-C3-M1 Wi-Fi + BLE Module

SKU: 1225297
Out of stock

249.00

Add to Wishlist
Add to Wishlist
  1. Module: name ESP-C3-M1-I
  2. Package: SMD-61
  3. Size 12.5*13.2*2.4(±0.2)mm
  4. Antenna: IPEX interface
  5. Frequency Range: 2400 ~ 2483.5MHz
Out of stock

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Description

ESP-C3-M1-I is a WiFi module developed by Shenzhen Ai-Thinker Technology Co., Ltd. The module’s core processor chip ESP32-C3 is a highly integrated low-power WiFi and Bluetooth system-on-chip (SoC), designed for the Internet of Things (IoT), mobile devices, wearable electronic devices, smart homes application, etc. The ESP32-C3 chip has industry-leading low power consumption performance and radiofrequency performance, and supports WiFi IEEE802.11b/g/n protocol and BLE 5.0. The chip is equipped with a RISC-V 32-bit single-core processor with a working frequency of up to160MHz.

Support secondary development without using other microcontrollers or processors. The chip has built-in 400 KB SRAM, 384 KB ROM, 8KB RTC SRAM, and built-in 4MBFlash. The chip supports a variety of low power consumption working states, which can meet the power consumption requirements of various application scenarios. The chip’s unique features such as fine clock gating function, dynamic voltage clock frequency adjustment function, and RF output power adjustable function can achieve the best balance between communication distance, communication rate and power consumption. The ESP-C3-M1-I module provides a wealth of peripheral interfaces, including UART, PWM, SPI, I2S, I2C, ADC, temperature sensor and up to 15 IO interfaces. The ESP-C3-M1-I module has a variety of unique hardware security mechanisms. The
hardware encryption accelerator supports AES, SHA and RSA algorithms. Among them, RNG, HMAC and digital signature (Digital Signature) modules provide more security features. Other security features include Flash encryption and secure boot (secure boot) signature verification. The perfect security mechanism enables the chip to be perfectly applied to various encryption products. The ESP-C3-M1-I module supports low-power Bluetooth: Bluetooth5, Bluetooth mesh. Bluetooth rate support: 125Kbps, 500Kbps, 1Mbps, 2Mbps. Support broadcast extension, multi-broadcasting, channel selection


Features: 

  1. Support WiFi 802.11b/g/n, 1T1R mode data rate up to 150Mbps
  2. Support BLE5.0, rate support: 125Kbps, 500Kbps, 1Mbps, 2Mbps
  3. ISC-V 32-bit single-core processor, supports a clock frequency of up to 160 MHz, has 400KB SRAM, 384 KB ROM, 8KB RTC SRAM
  4. Support UART/GPIO/ADC/PWM/I2C/I2S/SPI interface, temperature sensor, pulse
    counter
  5. SMD-61 Package
  6. Integrated WiFi MAC/BB/RF/PA/LNA/Bluetooth
  7. Support multiple sleep modes, deep sleep current is less than 5uA
  8. Serial port rate up to 5Mbps
  9. Support STA/AP/STA+AP mode and promiscuous mode
  10. Support Smart Config (APP)/AirKiss (WeChat) for Android and IOS one-click networkconfiguration
  11. Support serial port local upgrade and remote firmware upgrade (FOTA)
  12. General AT commands can be used quickly
  13. Support secondary development, integrated Windows and Linux development environment
  14. About Flash: ESP-C3-M1-I chip has built-in 4MByte Flash by default

Packages includes:

1 x Ai-Thinker ESP-C3-M1 Wi-Fi + BLE Module

Additional information

Module

name ESP-C3-M1-I

Antenna

IPEX interface

Frequency Range

2400 ~ 2483.5MHz

SPI

Flash 4MByte

IO

IO0, IO1, IO2, IO3, IO4, IO5, IO6, IO7, IO8, IO9, IO10, IO18, IO19, IO20, IO21

Working Temperature

-40 ℃ ~ 85 ℃(C3FN4 Normal temperature version, )-40 ℃ ~ 105 ℃(C3FH4 High temperature version)

Store Temperature

-40 ℃ ~ 125 ℃, < 90%RH

Power supply range Voltage

3.0V ~ 3.6V,Electrical current >500mASupport Interface UART/GPIO/ADC/PWM/I2C/I2S/SPI

UART Rate

Support 110 ~ 4608000 bps ,default 115200 bps

Bluetooth

BLE 5.0, Does not support traditional Bluetooth

Security

WEP/WPA-PSK/WPA2-PSK

Package

SMD-61

Size

12.5×13.2×2.4(±0.2)mm

Quick Comparison

SettingsAi-Thinker ESP-C3-M1 Wi-Fi + BLE Module removeAi-Thinke VC-01 module removeAi-Thinker VC-02-Kit removeAi-Thinker Ai-WB2-13U Module removeAi-Thinker Ai-WB2-01S Module removeAi-Thinker Ai-WB2-32S Module remove
NameAi-Thinker ESP-C3-M1 Wi-Fi + BLE Module removeAi-Thinke VC-01 module removeAi-Thinker VC-02-Kit removeAi-Thinker Ai-WB2-13U Module removeAi-Thinker Ai-WB2-01S Module removeAi-Thinker Ai-WB2-32S Module remove
Image
SKU122529712925901292589138287813828711382879
Rating
Price249.00269.00679.00249.00249.00249.00
Stock
Out of stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityOut of stockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  1. Module: name ESP-C3-M1-I
  2. Package: SMD-61
  3. Size 12.5*13.2*2.4(±0.2)mm
  4. Antenna: IPEX interface
  5. Frequency Range: 2400 ~ 2483.5MHz
  1. Model: VC-01
  2. Package: SMD-24
  3. Size 25.5 x 24 x 3.2 (± 0. 2) mm
  4. Working temperature: -40 ℃ ~ 85 ℃
  1. Module: VC-02
  2. Supply voltage: 5V,
  3. Current: greater than 500mA
  4. Interfaces UART/I2C/PWM/DAC/GPIO
  1. Model: AI-WB2-13U
  2. Package: SMD-18
  3. Size: 14.0*18.0*3.1(±0.2)mm
  4. Antenna: IPEX connector
  5. Frequency: 2400~2483.5MHz
  1. Model: Ai-WB2-01S
  2. Package: DIP-8
  3. Size: 14.5*24.5*11.2(±0.2)mm
  4. Antenna on-board: PCB antenna
  5. Frequency: 2400 ~ 2483.5MHz
  1. Model: Ai-WB2-32S
  2. Package: SMD-38
  3. Size: 25.5×18.0xx3.1(±0.2)mm
  4. Antenna: PCB on board, IPEX connector
  5. Frequency: 2400~2483.5MHz
Content

ESP-C3-M1-I is a WiFi module developed by Shenzhen Ai-Thinker Technology Co., Ltd. The module’s core processor chip ESP32-C3 is a highly integrated low-power WiFi and Bluetooth system-on-chip (SoC), designed for the Internet of Things (IoT), mobile devices, wearable electronic devices, smart homes application, etc. The ESP32-C3 chip has industry-leading low power consumption performance and radiofrequency performance, and supports WiFi IEEE802.11b/g/n protocol and BLE 5.0. The chip is equipped with a RISC-V 32-bit single-core processor with a working frequency of up to160MHz.

Support secondary development without using other microcontrollers or processors. The chip has built-in 400 KB SRAM, 384 KB ROM, 8KB RTC SRAM, and built-in 4MBFlash. The chip supports a variety of low power consumption working states, which can meet the power consumption requirements of various application scenarios. The chip’s unique features such as fine clock gating function, dynamic voltage clock frequency adjustment function, and RF output power adjustable function can achieve the best balance between communication distance, communication rate and power consumption. The ESP-C3-M1-I module provides a wealth of peripheral interfaces, including UART, PWM, SPI, I2S, I2C, ADC, temperature sensor and up to 15 IO interfaces. The ESP-C3-M1-I module has a variety of unique hardware security mechanisms. The
hardware encryption accelerator supports AES, SHA and RSA algorithms. Among them, RNG, HMAC and digital signature (Digital Signature) modules provide more security features. Other security features include Flash encryption and secure boot (secure boot) signature verification. The perfect security mechanism enables the chip to be perfectly applied to various encryption products. The ESP-C3-M1-I module supports low-power Bluetooth: Bluetooth5, Bluetooth mesh. Bluetooth rate support: 125Kbps, 500Kbps, 1Mbps, 2Mbps. Support broadcast extension, multi-broadcasting, channel selection


Features: 

  1. Support WiFi 802.11b/g/n, 1T1R mode data rate up to 150Mbps
  2. Support BLE5.0, rate support: 125Kbps, 500Kbps, 1Mbps, 2Mbps
  3. ISC-V 32-bit single-core processor, supports a clock frequency of up to 160 MHz, has 400KB SRAM, 384 KB ROM, 8KB RTC SRAM
  4. Support UART/GPIO/ADC/PWM/I2C/I2S/SPI interface, temperature sensor, pulse
    counter
  5. SMD-61 Package
  6. Integrated WiFi MAC/BB/RF/PA/LNA/Bluetooth
  7. Support multiple sleep modes, deep sleep current is less than 5uA
  8. Serial port rate up to 5Mbps
  9. Support STA/AP/STA+AP mode and promiscuous mode
  10. Support Smart Config (APP)/AirKiss (WeChat) for Android and IOS one-click networkconfiguration
  11. Support serial port local upgrade and remote firmware upgrade (FOTA)
  12. General AT commands can be used quickly
  13. Support secondary development, integrated Windows and Linux development environment
  14. About Flash: ESP-C3-M1-I chip has built-in 4MByte Flash by default

Packages includes:

1 x Ai-Thinker ESP-C3-M1 Wi-Fi + BLE Module

VC-01 is a low-cost pure offline speech recognition module, Ai-Thinker Technology. The module uses the voice chip US516P6 launched by Unisound, and continuously optimizes and innovates algorithms in speech recognition technology. The offline recognition algorithm and chip architecture are deeply integrated to provide customers with ultra-low-cost offline speech recognition solutions. It can be widely and quickly applied to smart homes, all kinds of smart small household appliances, 86 boxes, toys, lamps, and other products that need voice control. The US516P6 chip uses a 32-bit RSIC architecture core and incorporates a DSP instruction set specifically for signal processing and speech recognition, an FPU arithmetic unit that supports floating-point operations, and an FFT accelerator. VC-01 supports offline identification of 150 local instructions, an RTOS lightweight system, rich peripheral interfaces, and simple and friendly custom tools.


Fearures:

  1. 32bit RISC core, running at 240MHz
  2. Support DSP instruction set and FPU floating-point operation Unit
  3. FFT Accelerator: Support 1024-point complex FFT/IFFT operations, or 2048-point real
    FFT/IFFT operations
  4. Unisound customized speech algorithm operator
  5. RC 12MHz clock source and PLL locked loop clock source
  6. Built-in POR (Power on Reset), low voltage detection and watchdog

Specifications: 

  1. Model: VC-01
  2. Package: SMD-24
  3. Size 25.5 x 24 x 3.2 (± 0. 2) mm
  4. Working temperature: -40 ℃ ~ 85 ℃
  5. Storage environment: -40 ℃ ~ 125 ℃, <90% RH
  6. Supply Voltage: 3.6 V-5 V, Supply Current> 500mA
  7. Interfaces: UART/I2C/PWM/SPI/GPIO
  8. IO: 12
  9. UART Rate: Default 115200 bps
  10. SPI Flash: 2MB (built-in)

Packages Includes: 

1 x Ai-Thinke VC-01 module

The VC-02-Kit is a development board designed for the VC-02 module, and it is a shared the same board with the VC-01-Kit. The development board integrates the CH340C serial port to a USB chip, providing a basic debugging interface and USB upgrade interface, designing wake-up light and cold and cooling lamp, providing status indication and control instructions, and easy to debug the simple control
function. VC-02 is a low-cost pure offline speech recognition module developed by Shenzhen
Ai-Thinker Technology Co., Ltd. The module uses the voice chip US516P6 launched by Unisound, and continuously optimizes and innovates algorithms in speech recognition technology. The offline recognition algorithm and chip architecture are deeply integrated to provide customers with ultra-low-cost offline speech recognition solutions. It can be widely and quickly applied to smart homes, all kinds of smart small household appliances, 86 boxes, toys, lamps, and other products that need voice control. The US516P6 chip uses a 32-bit RSIC architecture core and incorporates a DSP instruction set
specifically for signal processing and speech recognition, an FPU arithmetic unit that supports floating-point operations, and an FFT accelerator. VC-02 supports offline identification of 150 local instructions, an RTOS lightweight system, rich peripheral interfaces, and simple and friendly custom tools.


Features: 

  1. All GPIOs can be configured as external interrupt input and wake-up source
  2. One full-duplex UART with the maximum rate of 3Mbps
  3. Support I2C,DAC,PWM and multiple interfaces
  4. Built-in 242KB high-speed SRAM
  5. Built-in 2MB FLASH
  6. Support dual-channel DAC output
  7. 32bit RISC core, running at 240MHz
  8. Support DSP instruction set and FPU floating point operation unit

Speccification:

  1. Module: VC-02
  2. Package: DIP-19(2.54 spatial standard pin header)
  3. Working temperature: -40 ℃ ~ 85 ℃
  4. Storage environment: -40 ℃ ~ 125 ℃ , < 90%RH
  5. Supply voltage: 5V,
  6. Current: greater than 500mA
  7. Interfaces UART/I2C/PWM/DAC/GPIO
  8. IO: 5 GPIOs
  9. UART rate: UART1 default 115200 bps、UART0(IOB8) default 57600Flash 2MB (built-ib
  10. Size 42.2 x 35.6(±0.2)mm

Packages Includes:

1 x Ai-Thinker VC-02-Kit

Ai-WB2-13U is a Wi-Fi&BT module developed by Shenzhen Ai-Thinker Technology Co., LTD. The module is equipped with BL602 chip as the core processor and supports Wi-Fi 802.11b/ g/n protocol and BLE 5.0 protocol. The BL602 chip has a low-power 32-bit RISCCPU, 276KB RAM, and a wealth of peripheral interfaces, including SDIO, SPI, UART, I2C, IR Remote, PWM, ADC, DAC, PIR and GPIO etc. It can be widely used in Internet of Things(IoT), mobile devices, wearable electronic devices, smart home and other fields.


Features:

  1. The package is SMD-18Support IEEE 802.11 b/g/n protocol
  2. Wi-Fi Security Support WPS/WEP/WPA/WPA2 Personal/WPA2 Enterprise/WPA3 Support 20MHz bandwidth and
  3. Max rate is 72.2 Mbps
  4. Bluetooth BLE 5.0, Bluetooth Mesh
  5. Support Station + BLE mode、Station + SoftAP + BLE mode
  6. Support 32-bit RISC CPU,276KB RAM
  7. Secure start-up, supports mirroring with ECC-256 signature
  8. Support QSPI/SPI Flash On-The-Fly AES Decryption, support AES 128 CTRmode
  9. Support AES 128/192/256-bit encryption engine
  10. Support SHA-1/224/256
  11. Support true Random number generator (TRNG)
  12. Public key Accelerator (PKA), support large number basic operations, software providessignature, verification and other application program interface
  13. Support SDIO,SPI,UART,I2C,IR remote,PWM,ADC,DAC,PIR,GPIOetc Integrated Wi-Fi
  14. MAC/BB/RF/PA/LNA/BT
  15. Support a variety of sleep modes, deep sleep current 12μA
  16. Universal AT instruction for quick start
  17. Support secondary development, integrated Windows, Linux development environment

Specifications:

  1. Model: AI-WB2-13U
  2. Package: SMD-18
  3. Size: 14.0*18.0*3.1(±0.2)mm
  4. Antenna: IPEX connector
  5. Frequency: 2400~2483.5MHz
  6. Operating temperature: -40℃ ~ 85℃
  7. Storage temperature: -40℃ ~ 125℃, < 90%RH
  8. Power supply Support voltage: 2.7V ~ 3.6V,supply current ≥500mA
  9. Interface: UART/GPIO/ADC/PWM/I2C/SPI
  10. IO: 11
  11. UART rate: Default 115200 bps
  12. Security: WPS/WEP/WPA/WPA2 Personal/WPA2 Enterprise/WPA3
  13. Flash: Default 4MByte,Support expansion

Package Includes:

1 x Ai-Thinker Ai-WB2-13U Module

Ai-WB2-01S is a Wi-Fi & BLE module developed by Shenzhen Ai-Thinker Technology Co., Ltd. This module is equipped with BL602 chip as the core processor and supports Wi-Fi 802.11b/g/n protocol and BLE 5.0 protocol. The BL602 chip has a built-in 32-bit RISC CPU with low power consumption and 276KB RAM. It can be widely used in the Internet of Things (IoT), mobile devices, wearable electronic devices, smart homes, and other fields.


Features:

  1. DIP-8 package
  2. Supports IEEE 802.11 B/g/n protocol
  3. Wi-Fi security supports WPS/WEP/WPA/WPA2 Personal/WPA2 Enterprise/WPA3
  4. Supports 20MHz bandwidth with a maximum speed of 72.2 Mbps.
  5. Bluetooth 5.0, Bluetooth Mesh
  6. Supports Station + BLE mode, Station + SoftAP + BLE mode
  7. Supports 32-bit RISC CPU and 276KB RAM
  8. Secure Startup supports Images with ECC-256 signatures
  9. Supports real-time AES decryption (OTFAD) in QSPI and SPI Flash, and supports AES
    128 CTR mode
  10. Supports AES 128, 192, and 256-bit encryption engines
  11. Supports SHA-1/224/256
  12. Support True Random Number Generator (TRNG)
  13. Public Key Accelerator (PKA), supports a large number of basic operations, and software provides
    a signature, verification, and other application program interface
  14. Supports UART, PWM,ADC, and GPIO
  15. Integrated Wi-Fi MAC/BB/RF/PA/LNA/BT
  16. Supports multiple sleep modes with a deep sleep current of 12μA
  17. Universal AT instruction for a quick start
  18. Supports secondary development and integrates Windows and Linux development
    environments

Specifications:

  1. Model: Ai-WB2-01S
  2. Package: DIP-8
  3. Size: 14.5*24.5*11.2(±0.2)mm
  4. Antenna on-board: PCB antenna
  5. Frequency: 2400 ~ 2483.5MHz
  6. Operating temperature: -40℃ ~ 85℃
  7. Storage temperature: -40℃ ~ 125℃, < 90%R
  8. Power supply Power supply voltage: 2.7V ~ 3.6V, power supply current
    ≥500mA
  9. Interface: UART/GPIO/ADC/PWM
  10. IO: 3
  11. UART: rate Default value: 115200 bps
  12. Security: WPS/WEP/WPA/WPA2 Personal/WPA2 Enterprise/WPA3
  13. Flash: Default 2MByte Support expansion

Package Includes:

1 x Ai-Thinker Ai-WB2-01S Module

Ai-WB2-32S is a Wi-Fi and BT module developed by Shenzhen Ai-Thinker Technology Co., LTD. The module is equipped with BL602 chip as the main processor and supports Wi-Fi. 802.11b/g/n protocol and BLE 5.0 protocol. The BL602 chip has a low power 32-bit RISCCPU, 276KB RAM, and a variety of peripheral interfaces including SDIO, SPI, UART, I2C, IR Remote, PWM, ADC, DAC, PIR, and GPIO. It can be widely used in the Internet of things (IoT), mobile devices, wearable electronic devices, smart home and other fields.


Features:

  1. Support IEEE 802.11 b/g/n protocol
  2. Wi-Fi security supports Wi-Fi WMM/WMM-PS/WPA/WPA2 /WPS
  3. Supports 20/40MHz bandwidth with a maximum speed of 150 Mbps
  4. Support BLE working mode, support BLE4.2 protocol
  5. Support Station , Station + SoftAP , SoftAP mode
  6. Support 32-bit XT804 CPU,288KB RAM
  7. MCU has built-in Tee security engine, and the code can distinguish security events fromnon-security events
  8. Integrated SASC/TIPC, memory and internal modules/interfaces can be configuredwithsecurity attributes to prevent unsafe code access
  9. Enable firmware signature mechanism for secure Boot/upgrade
  10. With firmware encryption function to enhance code security
  11. Firmware encryption keys are distributed using asymmetric algorithms for enhancedkeysecurity
  12. Hardware encryption module: RC4256, AES128, DES/3DES, SHA1/MD5, CRC32, 2048RSA, true random number generator
  13. Integrated Wi-Fi MAC/BB/RF/PA/LNA/Bluetooth
  14. Supports secondary development and integrates Windows and Linux development
    environments

Specifications:

  1. Model: Ai-WB2-32S
  2. Package: SMD-38
  3. Size: 25.5×18.0xx3.1(±0.2)mm
  4. Antenna: PCB on board, IPEX connector
  5. Frequency: 2400~2483.5MHz
  6. Working temperature: -40°C ~ 85°C
  7. Storage temperature: -40°C ~ 125°C, relative humidity <90%
  8. Supply voltage: 2.7V ~ 3.6V,
  9. Supply current ≥ 500mA
  10. Interface UART/GPIO/ADC/PWM/I2C/SPI
  11. IO: 15
  12. UART Speed: Default 115200 bps
  13. Bluetooth 5.0
  14. Security WPS/WEP/WPA/WPA2 Personal/WPA2 Enterprise/WPA3
  15. Flash: default 4MB, extension support

Package Includes:

1 x Ai-Thinker Ai-WB2-32S Module

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Module

name ESP-C3-M1-I

Antenna

IPEX interface

Frequency Range

2400 ~ 2483.5MHz

SPI

Flash 4MByte

IO

IO0, IO1, IO2, IO3, IO4, IO5, IO6, IO7, IO8, IO9, IO10, IO18, IO19, IO20, IO21

Working Temperature

-40 ℃ ~ 85 ℃(C3FN4 Normal temperature version, )-40 ℃ ~ 105 ℃(C3FH4 High temperature version)

Store Temperature

-40 ℃ ~ 125 ℃, < 90%RH

Power supply range Voltage

3.0V ~ 3.6V,Electrical current >500mASupport Interface UART/GPIO/ADC/PWM/I2C/I2S/SPI

UART Rate

Support 110 ~ 4608000 bps ,default 115200 bps

Bluetooth

BLE 5.0, Does not support traditional Bluetooth

Security

WEP/WPA-PSK/WPA2-PSK

Package

SMD-61

Size

12.5×13.2×2.4(±0.2)mm