Sonoff is a universal switch for your smart home system to remotely and automatically turn on/off any appliances by phone APP. It can monitor real-time temperature, when the temperature of the environment falls within the range, it will automatically turn on or off the connected devices. This is a Waterproof DS18B20 Temperature Sensor. The probe uses the original DS18B20 temperature sensor chip. It is waterproof, moisture-proof and anti-rust with the high-quality stainless steel tube encapsulated. No other components, unique single bus interface.

The probe adopts a DS18B20 temperature sensor chip. Its probe is made of stainless steel which is waterproof, moisture-proof, and anti-rust. Stainless steel housing of 6 x 50mm and Lead length of 100cm. Please note that the temperature probe requires no external components and has a single bus interface. High-quality stainless steel tube encapsulation waterproof moisture-proof prevents rust.

Features:

1. Free iOS and for Android mobile App eWeLink.
2. Real-time device status provided to App.
3. Monitor real-time temperature.
4. Turn electrical devices on/off from anywhere, with precision and high accuracy temperature waterproof DS18B20 sensor.

Package includes:

1 x DS18B20 Waterproof Temperature Sensor for Sonoff TH10A/TH16A

This product specification is applied to the Humidity Sensor Type HCZ-D5. The terminal electrode material uses lead free solder (Sn / Ag / Cu). This product is conformity with RoHS directive which means that lead, cadmium, mercury, hexavelent chromium and specific bromine-based flame retardants have not been used.

Applications:

1. Air conditioner
2. Humidifier
3. Dehumidifier
4. Hygrometer recorder
5. Transmitter

Features:

1. Product: Humidity Sensor
2. Rated Voltage: 1V
3. Humidity Accuracy: +5
4. Operating Frequency Rang: 2KHZ
5. Operating Temperature: 60°C
6. Lightweight

Packages Includes:

1 x MULTI-COMP Humidity Sensor, HCZ Series, 20% to 90% RH, 5 %, Through Hole, Enclosed

It featured with Double metal chip, speed dynamic type, sensitive, reliable, stable action temperature, long service life, and no arc phenomenon. This flange on the switch is float and easy to install. The pin width is 6.3mm

Application: Mainly used for microwave, oven, coffee maker, Speed Cook oven, heater, Dryer, gas furnace, Bath Vent/Heater, wall heater, motor electric heating water dispenser, water bottles, coffee shell, electric iron, dryer, air conditioning, water heater, electronic cooker, heater, motor cleaner

Specifications:

1. Model: KSD301
2. Rated Voltage: 250V
3. Rated Current: 10A
4. Rated Temperature: 85ºC
5. Diameter: 16mm

Package Includes:

1 x KSD301 85 Degrees 250V 10A Normally Open Thermostat Sensor

AHT2415C temperature and humidity probe adopts an integrated digital temperature and humidity chip, which outputs standard I²C signals and calibrated before delivery. The sensor Filter Membrane can effectively prevent the interference by water vapor and dust; Sensor wire length 550mm (±5), and offers customization options.

feature:

1.  304 stainless steel shell
2.  Excellent impact resistance, heat resistance, low temperature resistance ,chemical resistance and electrical properties
3. Fully calibrated
4.  Digital-output,I²Cinterface
5.  Excellent long-term stability
6.  Quick response, fast recovery time, strong anti-interference ability

specification:

1. Operating Voltage: 2.2~5.5V
2. Working Current: 980μA (Typical)
3. Temperature Range: 30~80℃
4. Humidity Range: 0~100%RH
5. Accuracy: ±0.5℃;±3%RH;
6. Typical Power: 3.2mW
7. Interface: I²C

Package include:

1 X AHT2415C Temperature and Humidity Probe

B3950 10K NTC waterproof High precision thermistor temperature Sensor 5 x 25mm with XH2.54 Connector can be used to measure temperature in a variety of applications.

The sensor has stainless steel 5 x 25mm tip with an XH2.54 connector with a 5-meter cable. It is Negative thermal coefficient (NTC) will decrease. But the formula in practice is not linear,  so sometimes an accurate table of measurements is better than the linear formula. These measurements can usually be found in the datasheet that accompanies the thermistor.

Specifications and Features:

1. Probe sheath material: Stainless Steel
2. Style: B3950 10K
3. Resistance value: 10K ± 1%
4. Measurement range: -20 to 105 °C
5. Cable Length: 3-meter
6. Size of probe: 5 x 25 mm
7. Output wires: 2
8. Typical Dissipation Constant: 5mW/ °C
9. Probe insulation: >100MOhm

Package Includes:

1 x B3950 10K NTC Thermistor Temperature Sensor 5*25mm with XH2.54 Connector with 3-meter Cable

Featutes: