DS3502U Digital Potentiometer 10kΩ

SKU: 872051
Out of stock

395.00

Add to Wishlist
Add to Wishlist
  1. Control Interface: I2C
  2. Resistance Value: 10kΩ
  3. Number of Positions: 128
  4. Taper Type: Linear
  5. Memory Type: Non-Volatile
  6. Number of Pots per Package: 1
  7. Mounting Type: Surface Mount
  8. Package-Type: μSOP
  9. Pin Count: 10
Out of stock

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Description

This is a DS3502U Digital Potentiometer 10kΩ 128-Position Linear I2C 10 Pin, μSOP IC. A DS3502 is a 7-bit, nonvolatile (NV) digital potentiometer featuring an output voltage range of up to 15.5V. Programming is accomplished by an I2C-compatible interface, which can operate at speeds of up to 400kHz. External voltages are applied at the RL and RH inputs to define the lowest and highest potentiometer outputs.


Features:

  1. 128 Wiper Tap Points
  2. I2C-Compatible Serial Interface
  3. Address Pins Allow Up to Four DS3502s to Share the Same I²C Bus
  4. 10-Pin μSOP Package

Package Includes:

1 x DS3502U Digital Potentiometer 10kΩ.

Additional information

Resistance (Ω)

10k

Interface Type

I2C

Tolerance

±20%

Temperature Co-efficient

±4ppm/°C

Digital Operating Voltage

2.5V to 5.5V

Analog Operating Voltage

4.5V to 15.5V

Quick Comparison

SettingsDS3502U Digital Potentiometer 10kΩ remove3296W-1-500LF-Trimpot Potentiometer removePTV09A-4225F-B103-Rotary Potentiometer removePT6WV-471A2020- – AMPHENOL PIHER SENSORS AND CONTROLS removePTV09A-4025S-A102-Rotary Potentiometer removeRK09K1130AH1-Rotary Potentiometer remove
NameDS3502U Digital Potentiometer 10kΩ remove3296W-1-500LF-Trimpot Potentiometer removePTV09A-4225F-B103-Rotary Potentiometer removePT6WV-471A2020- – AMPHENOL PIHER SENSORS AND CONTROLS removePTV09A-4025S-A102-Rotary Potentiometer removeRK09K1130AH1-Rotary Potentiometer remove
Image
SKU87205111636741163793115965511637911163798
Rating
Price395.00215.0055.0044.0059.0055.00
Stock
Out of stock
In Stock
In Stock
In Stock
In Stock
Out of stock
AvailabilityOut of stockIn StockIn StockIn StockIn StockOut of stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Read more

Description
  1. Control Interface: I2C
  2. Resistance Value: 10kΩ
  3. Number of Positions: 128
  4. Taper Type: Linear
  5. Memory Type: Non-Volatile
  6. Number of Pots per Package: 1
  7. Mounting Type: Surface Mount
  8. Package-Type: μSOP
  9. Pin Count: 10
  1. Model: 3296W-1-500LF
  2. Product type: Trimpot Potentiometer
  3. Temperature: -50 tto 40 Degree Celsius
  4. Rated Power: 0.5W
  5. Tolerance: +/- 10%
  1. Track Resistance: 10kohm
  2. No. of Turns: 1Turns
  3. Track Taper: Linear
  4. Power Rating: 50mW
  5. Resistance Tolerance: ± 20%
  1. Excellent performance
  2. Carbon resistive element
  3. Up to 10 mechanical detents
  4. Up to 10.000 life cycles
  5. IP54 protection
  1. Track Resistance: 1kohm
  2. No. of Turns: 1Turns
  3. Track Taper: Linear
  4. Power Rating: 50mW
  5. Resistance Tolerance: ± 20%
  1. Track Resistance: 10kohm
  2. No. of Turns: 1Turns
  3. Track Taper: Linear
  4. Power Rating: 50mW
  5. Resistance Tolerance: ± 20%
Content

This is a DS3502U Digital Potentiometer 10kΩ 128-Position Linear I2C 10 Pin, μSOP IC. A DS3502 is a 7-bit, nonvolatile (NV) digital potentiometer featuring an output voltage range of up to 15.5V. Programming is accomplished by an I2C-compatible interface, which can operate at speeds of up to 400kHz. External voltages are applied at the RL and RH inputs to define the lowest and highest potentiometer outputs.


Features:

  1. 128 Wiper Tap Points
  2. I2C-Compatible Serial Interface
  3. Address Pins Allow Up to Four DS3502s to Share the Same I²C Bus
  4. 10-Pin μSOP Package

Package Includes:

1 x DS3502U Digital Potentiometer 10kΩ.

3296W-1-500LF-Trimpot Potentiometer

A trimmer potentiometer, also known as a trim pot, is a type of variable resistor or adjustable potentiometer that can adjust, tune, and calibrate circuits. These trimmer resistors are often used to initially calibrate equipment after manufacturing.

Applications:

  1. Audio control: Both linear, and rotary potentiometers, are used to control audio equipment for changing the loudness and other audio-related signals.
  2. Television: They are used to control the picture brightness, colour response and contrast.

Note:

  1. Product Images are shown for illustrative purposes only and may differ from the actual product.
  2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.

Features:

  1. Variable resistor or adjustable potentiometer
  2. Adjust, tune, and calibrate circuits
  3. Easy to use
  4. Low power consumption

Specifications:

  1. Model: 3296W-1-500LF
  2. Product type: Trimpot Potentiometer
  3. Temperature: -50 tto 40 Degree Celsius
  4. Rated Power: 0.5W
  5. Tolerance: +/- 10%
  6. Max Voltage: 300V
  7. Minimum Order Quantity: 500

Package Includes:

1 x 3296W-1-500LF-Trimpot Potentiometer

PTV09A-4225F-B103

Rotary Potentiometer, 9 mm, Carbon, 10 kohm, 1 Turns, Linear, 50 mW, ± 20%, PTV09A Series


Specifications:

  1. Track Resistance: 10kohm
  2. No. of Turns: 1Turns
  3. Track Taper: Linear
  4. Power Rating: 50mW
  5. Resistance Tolerance: ± 20%
  6. Product Range: PTV09A
  7. Potentiometer Mounting: Panel Mount
  8. Shaft Diameter: 6mm
  9. No. of Gangs: 1
  10. Adjustment Type: Flatted
  11. Shaft Length: 25mm

Package Includes:

1 x PTV09A-4225F-B103-Rotary Potentiometer

The PT6WV-471A2020-Amphenol Piher Sensors And Controls PT-6 potentiometer offer control where frequent adjustment is required. The shaftless design allows for the employment of different engagement mechanisms, such as a customized shaft, motor control, or a human interface adjustment. This potentiometer can also control variable outputs including frequency, change in motor speed, or volume.

Applications:

  1. Appliance program selection
  2. Thermostat adjustment
  3. Timer and control relays
  4. Consumer electronics
  5. Power tool controls
  6. Test and measurement equipment

Features:

  1. Excellent performance
  2. Carbon resistive element
  3. Up to 10 mechanical detents
  4. Up to 10.000 life cycles
  5. IP54 protection
  6. Magazines packaging for automatic insertion
  7. Polyester substrate
  8. Wiper positioned at initial, 50% or fully clockwise
  9. Loose and assembled shaft and knobs
  10. Linear, logarithmic, and antilogarithmic tapers
  11. SPDT switch function On request
  12. Embossed tape packaging

Package Includes:

1 x PT6WV-471A2020-Amphenol Piher Sensors And Controls

PTV09A-4025S-A102
POT, LINEAR, 1K, 0.05W, 20%, KNURLED


Specifications:

  1. Track Resistance: 1kohm
  2. No. of Turns: 1Turns
  3. Track Taper: Linear
  4. Power Rating: 50mW
  5. Resistance Tolerance: ± 20%
  6. Product Range: PTV09A Series
  7. Potentiometer Mounting: Through Hole
  8. Shaft Diameter: 6mm
  9. No. of Gangs: 1
  10. Adjustment Type: Knurled
  11. Shaft Length: 25mm

Package Includes:

1 x PTV09A-4025S-A102-Rotary Potentiometer

RK09K1130AH1

Rotary Potentiometer, 10 Kohm, 1 Turns, Linear, 50 mW, ± 20%, RK09K Series

The RK09K/D series from Alps are insulated shaft snap-in rotary potentiometers. These are compact type potentiometers 9.8mm wide and are ideally designed for high-density sets and audio applications.
  1. Single unit or dual unit resistor element
  2. Flat knob and screwdriver type shafts are available
  3. The length of the shaft varies from 15mm to 30mm
  4. With or without center detent option available
  5. Total resistance of 5Kohm, 10Kohm, 20Kohm, 50Kohm, 100Kohm and 200Kohm
  6. Total resistance tolerance of ±20% and ±30%
  7. Horizontal and vertical type mounting available
  8. Operating temperature range -10°C to 70°C
  9. Total rotational angle of 280° or 300°and maximum power rating up to 0.05W
  10. 15A, 15C, 1B, 3B resistance taper available

Specifications:

  1. Track Resistance: 10kohm
  2. No. of Turns: 1Turns
  3. Track Taper: Linear
  4. Power Rating: 50mW
  5. Resistance Tolerance: ± 20%
  6. Product Range: RK09K Series
  7. Potentiometer Mounting: Through Hole
  8. Shaft Diameter: 6mm
  9. No. of Gangs: 1
  10. Adjustment Type: Flatted
  11. Shaft Length: 17.4mm

Package Includes:

1 x RK09K1130AH1-Rotary Potentiometer

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Resistance (Ω)

10k

Interface Type

I2C

Tolerance

±20%

Temperature Co-efficient

±4ppm/°C

Digital Operating Voltage

2.5V to 5.5V

Analog Operating Voltage

4.5V to 15.5V