DYS 20A Brushless ESC for FPV Drone (Original)

SKU: 988114
In Stock

1,155.00

  1. Running current: 20A(Output:  Continuous 20A, Burst 25A up to 10 Secs)
  2. Input Voltage: DC 6-16.8V(2-4S ).
  3. BEC: 5V/2A.
  4. Dimensions (L x W x H): 25 x 15 x 4mm.
In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Description

Take advantage of the latest DYS XSD20A ESC Solder Version BLHeli_S development with these DShot capable ESC’s. The DYS XSD series speed controllers (ESC) have been designed for high-speed motors, which make them ideal for racing drones. The ESCs utilize a high-performance Silabs EFM8BB21 microprocessor for smooth response and high-resolution throttle steps. They also come with BLHeliS firmware pre-flashed and support DShot300 or DShot600. Firmware can be upgraded by signal wire using a USB Linker.


Features:

  1. Utilizes high-performance EFM8BB21 50MHz MCU
  2. 12 FET Design
  3. High-current burst rating
  4. High-Resolution Throttle steps
  5. Supports: BLheli_S & Dshot600, Dshot300 – faster than Oneshot
  6. Dshot ESCs don’t require an ESC calibration
  7. Firmware upgradable via signal wire (works with USB Linker for XM series)
  8. Supports Motors with super high KV (EFM8BusyBee 50MHz can handle up to 500k eRPM)

Package Includes:

1 x DYS 20A Brushless ESC for FPV Drone

Additional information

Model

XSD20A

Operating Voltage (VDC)

2-4s LiPo

Supports Software

Dshot300/Dshot600

MCU

Silabs EFM8BB21

Continuous Current (A)

20

Color

Yellow

Length (mm)

36

Width (mm)

26

Height (mm)

7

Weight (gm)

32

Quick Comparison

SettingsDYS 20A Brushless ESC for FPV Drone (Original) removeHobbywing Xrotor-40A 2-6S ESC removeT Motor Flame 100A 14S ESC removeHENGE 8A UBEC removeT Motor Thunder 200A 24S ESC removeBidirectional 30A 2-4s UBEC 2A 5V remove
NameDYS 20A Brushless ESC for FPV Drone (Original) removeHobbywing Xrotor-40A 2-6S ESC removeT Motor Flame 100A 14S ESC removeHENGE 8A UBEC removeT Motor Thunder 200A 24S ESC removeBidirectional 30A 2-4s UBEC 2A 5V remove
Image
SKU98811413451781402974134517714029901345165
Rating
Price1,155.001,485.0010,830.00730.0097,880.00665.00
Stock
In Stock
Out of stock
In Stock
In Stock
In Stock
Out of stock
AvailabilityIn StockOut of stockIn StockIn StockIn StockOut of stock
Add to cart

Add to cart

Read more

Add to cart

Add to cart

Add to cart

Read more

Description
  1. Running current: 20A(Output:  Continuous 20A, Burst 25A up to 10 Secs)
  2. Input Voltage: DC 6-16.8V(2-4S ).
  3. BEC: 5V/2A.
  4. Dimensions (L x W x H): 25 x 15 x 4mm.
  1. Model Number:XRotor-40A
  2. Cont.Current:40A
  3. Burst Current(10sec):60A
  4. BEC:None
  5. Lipo:2-6S
  6. Programming:Timing (high/middle)
  7. Weight:26g
  1. Input Voltage: 6~14S Lipo
  2. Continuous Current: 100A
  3. Peak Current: 120A
  4. BEC: No

 

 

 

  1. Product: HENGE 8A UBEC
  2. Provide large output current
  3. Overcurrent and overheat protection function
  4. The max efficiency of the chip is up to 93%
  1. Support LIPO (S): 18-24S
  2. Continuous output current (A):  150A
  3. Instantaneous output current (Less than 10s): 200A

 

 

 

  1. Product: Bidirectional 30A 2-4s UBEC 2A 5V
  2. Input voltage: 5V
  3. Frequency PWM: 1000-2000us
  4. Peak Current (A): 30
Content

Take advantage of the latest DYS XSD20A ESC Solder Version BLHeli_S development with these DShot capable ESC’s. The DYS XSD series speed controllers (ESC) have been designed for high-speed motors, which make them ideal for racing drones. The ESCs utilize a high-performance Silabs EFM8BB21 microprocessor for smooth response and high-resolution throttle steps. They also come with BLHeliS firmware pre-flashed and support DShot300 or DShot600. Firmware can be upgraded by signal wire using a USB Linker.


Features:

  1. Utilizes high-performance EFM8BB21 50MHz MCU
  2. 12 FET Design
  3. High-current burst rating
  4. High-Resolution Throttle steps
  5. Supports: BLheli_S & Dshot600, Dshot300 – faster than Oneshot
  6. Dshot ESCs don’t require an ESC calibration
  7. Firmware upgradable via signal wire (works with USB Linker for XM series)
  8. Supports Motors with super high KV (EFM8BusyBee 50MHz can handle up to 500k eRPM)

Package Includes:

1 x DYS 20A Brushless ESC for FPV Drone

Hobbywing XRotor 40A APAC Brushless ESC 2-6S for RC multicopters.Using Multicopter special program, fast throttle response surpasses all kinds of open source software; Firmware is optimized specifically for disc motor, and it has very good compatibility. The ESC is highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing) easy to use.

The throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper so that a more stable flight; Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers.


Features:

  1. Using a Multintegrated circuitopter special program, fast throttle response surpasses all kinds of open source software.
  2. Firmware was optimized to specify integrated circuitously for disc motor, and it has very good compatibility.
  3. Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing, easy to use.
  4. A throttle signal line is a twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight.
  5. Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signals)
  6. Using MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.
  7. Ultra-low resistance MOSFET, strong flow capacity.

Package Includes:

1 x Hobbywing Xrotor 40A ESC for DIY Multicopter Drone

This T-motor 100A 500Hz 6-14S Flame Type ESC featured efficient and reasonable dissipation, layered structure. Waterproof and Dustproof with IP55 Industrial Standard. This motor is Compatible with U12 Motors and is specially designed for multi-rotors. Tiger Flame ESC can give a continuous current of 100A, and a peak current of up to 120A (10S).


Features:
  1. Multiple protection features: Low-voltage cut-off protection / over-heat protection/throttle signal loss protection.
  2. 3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircraft and helicopters.
  3. The throttle range can be configured and is fully compatible with all transmitters currently available on market.
  4. Smooth, linear, and precise throttle response.
  5. Our pocket-sized Program Card can be purchased separately for extremely easy programming the ESC in the field.
  6. With a program card, you can activate the music-playing function of the ESC, and totally there are 15 songs that can be selected

Package Includes :

1 x T Motor Flame 100A 14S ESC

 

 

 

When using a lithium battery pack of more than 3S, a switch‐mode BEC has much higher efficiency with lower heat. For a traditional linear BEC, For example, a 4S lithium battery pack has a typical voltage of 14.8V, in order to let BEC output 5V/1A, the current flow into the BEC is at least 1A, so the power on BEC is 14.8V* 1A=14.8W. But useful output power is only 5V*1A=5W, so the efficiency of the linear mode BEC is
just 5W/14.8W=33.8%, the redundant power 14.8W‐5W=9.8W changes to heat, which makes the BEC very hot, and makes it enter a protection state, thus unable to work


Features:

  1. Provide large output current
  2. Overcurrent and overheat protection function
  3. The max efficiency of the chip is up to 93%
  4. The small size and the light weight make it very convenient to use
  5. Shows the working status with an indicator(LED)

Package Includes:

1 x HENGE 8A UBEC

The Thunder 200A 24S Powerful ESC can be used for heavy-duty application motors. The ESC has full Metal body


Features:

  1. Easy to use, stable and reliable, strong anti-interference ability, good speed regulation performance.
  2. Muti-safety protection: low-voltage protection, high-voltage protection, overcurrent protection, over-temperature protection, startup failure protection, stall protection, and lost signal protection.
  3. Photoelectric isolation PWM control interface.
  4. Isolated serial port data post back: post back supply voltage, RPM, current, ESC temperature, and debug data.
  5. Extraposition temperature sensor, temperature measurement precision.

Package Includes:

1 x T Motor Thunder 200A 24S ESC

 

Bidirectional 30A 2-4s UBEC 2A 5V. It can be used in cars, ships, and underwater thrusters. No need to calibrate the throttle stroke, plug, and play. This product adopts imported components, a full power test. bidirectional  power output, no brake, direct reverse, quick response, and good handling.


Features: 

  1. Provide large output current
  2. Overcurrent and overheat protection function
  3. The max efficiency of the chip is up to
  4. The small size and the light weight make it very convenient to use

Package Includes:

1 x Bidirectional 30A 2-4s UBEC 2A 5V

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Model

XSD20A

Operating Voltage (VDC)

2-4s LiPo

Supports Software

Dshot300/Dshot600

MCU

Silabs EFM8BB21

Continuous Current (A)

20

Color

Yellow

Length (mm)

36

Width (mm)

26

Height (mm)

7

Weight (gm)

32

Model

Hobbywing Xrotor 40A

BEC

NO

Color

Black

Dimensions (mm) LxWxH

72 x 26 x 6

Weight (gm)

26

Continuous Current (A)

40

Operating Voltage (VDC)

2~6S lipo

Supports Software

Hobbywing Xrotor

Model

Flame 100A 14S ESC

Input Voltage

6~14S Lipo

Continuous Current

100A

Peak Current

120A

BEC

No

Input Voltage (V)

7‐25.5V

Output Voltage (VDC)

5V

Max. Output Current (A)

8

Burst output current

12A (≤15 Sec)

Ripples

<35mVp‐p(@8A/12V)

Model

Thunder 200A 24S

Support LIPO (S)

18-24S

Continuous output current (A)

150A

Instantaneous output current

200A (Less than 10s)

BEC function

No

Operating ambient temperature(℃)

-20~+65

Operating Humidity(%)

15~85 RH

Waterproof Level

Moisture resistant grade

Maximum support speed

100, 000 RPM (electrical speed)

Throttle refresh frequency

50-400HZ

Input signal level

3.3V-5V

Length (mm)

155

Width (mm)

65

Height (mm)

45

Weight (gm)

630

Input Voltage

5V

Peak Current (A)

30

Continuos Current

5A