DYS 30A Multi-Copter Brushless Speed Controller Programmable with 5V/2A BEC.  The ESC’s power input uses extremely low output resistance greatly enhances power stability and has a protective effect on the battery. Separately voltage regulator IC for the microprocessor. providing good anti-jamming capability. Using Simon K’s a dedicated multi-copter program tgy_debug, and the master chip with high stability crystal oscillator, making the motor control more precise.

The ongoing batch of this ESC has come with the below wire connection,

• White- ground
• Black- PWM Signal

Note: Actual product may vary from the product images. 

Features:

1. Drive tube and high-power Mos, and Mos tube plus a separate heat sink, Extreme low output resistance of the PCB(printed circuit board), super current endurance.
2. The power input uses extremely low output resistance greatly enhances the power stability and has a protective effect on the battery.
3. Safety electrical function: when the power is turned on, regardless of the throttle stick in any position does not start the motor immediately, to avoid personal injury.
4. Separately voltage regulator IC for the microprocessor. providing good anti-jamming capability.
5. Supported motor speed (Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).
6. Using Simon K’s a dedicated multi-copter program tgy_debug, and the master chip with high stability crystal oscillator, making the motor control more precise.

Package Includes:

1 x DYS 30A Multi-Copter Brushless Speed Controller Programmable ESC V2

This T-motor 100A 500Hz 4-8S Flame Type ESC featured efficient and reasonable dissipation, layered structure. Waterproof and Dustproof with IP55 Industrial Standard. This motor is Compatible with U12 Motors and specially designed for multi-rotors. Tiger Flame ESC can give a continuous current of 100A, and a peak current of up to 120A (10S).

Tiger Motor provides professional-level power for large multi-rotor aircraft. The ESC is housed in a machined aluminum case providing both heat dissipation and protection.

Features:

1. High-performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
2. The throttle range can be configured to be compatible with all transmitters currently available on market.
3. Smooth, linear, quick, and precise throttle response.
4. CNC Aluminum alloy enclosure, IP55 PCB with nanotechnology, widely used in UAV agriculture, search and rescue, etc.
5. Separate voltage regulator IC for the microprocessor to get a better anti-jamming capability.
6. Multiple protection features: Low-voltage cut-off protection / over-heat protection/throttle signal loss protection.
7. USB supported. The firmware of the ESC can be updated by the USB adapter.
8. Several kinds of Program Cards are supported. Very easy to program the ESC at home or at the field.

Specifications:

1. Output: Continuous 100A, Burst 120A up to 10 Secs.
2. Input Voltage: 4-8 cells lithium battery.
3. Refresh Rate: 500Hz
4. Protection: IP57
5. BEC: No

Package Includes:

1 x T Motor Flame 100A 6S ESC

Open source BLHELI-S program supports flight control signals such as DSHOT300 600 ONESHOT. With a high-performance processor, the response is fast and the throttle response is fast. A large number of installed experience, stable and reliable, strong overcurrent capacity.

Features:

1. It  is a digital ESC
2. Automatically detects the throttle stroke and neutral position of the throttle
3. It is suitable for nesting boats, remote control cars

Package Includes:

1 x Cyclone 20A BLHeil_S 20A ESC

When using a lithium battery pack of more than 3S, a switch‐mode BEC has much higher efficiency with lower heat. For a traditional linear BEC, For example, a 4S lithium battery pack has a typical voltage of 14.8V, in order to let BEC output 5V/1A, the current flow into the BEC is at least 1A, so the power on BEC is 14.8V* 1A=14.8W. But useful output power is only 5V*1A=5W, so the efficiency of the linear mode BEC is
just 5W/14.8W=33.8%, the redundant power 14.8W‐5W=9.8W changes to heat, which makes the BEC very hot, and makes it enter a protection state, thus unable to work

Features:

1. Provide large output current
2. Overcurrent and overheat protection function
3. The max efficiency of the chip is up to 93%
4. The small size and the light weight make it very convenient to use
5. Shows the working status with an indicator(LED)

Package Includes:

1 x HENGE 8A UBEC

An ESC isolates the high-power side (battery and motor) from the signal side (connection to the receiver) by internally transmitting the receiver throttle signal from the input side to the output side of the ESC through an opto-coupler.

ReadytoSky Simonk 30A ESC is specifically made for quadcopters and multi-rotors. Which provides faster and better motor speed control giving better flight performance compared to other available ESCs.

ReadytoSky Simonk 30A ESC comes with a multi-integrated special program, fast throttle response, surpasses all kinds of open-source software. Firmware was optimized specifically integrated circuitously for the disc motor, and it has very good compatibility and this ESC is compatible with 2-6s Lipo Battery.

Due to ultra-low resistance MOSFET, it has a strong flow capacity. With MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.

If you are wandering to build a drone and don’t know what will be the best ESC for you then worry no more, we have got your back. At Robu, we have everything for you to get started with your drone project.

Features:

1. Using Multi integrated circuit opted special program, fast throttle response, surpasses all kinds of open source software
2. Firmware was optimized specific integrated circuit ally for disc motor, and it has a very good compatibility
3. Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing), easy to use
4. Throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight
5. Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signal)
6. Using MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built
7. Ultra-low resistance MOSFET, strong flow capacity

Specifications:

1. Cont Current: 30A
2. Burst Current: 35A
3. BEC Model: Linear mode
4. BEC Output: 5V2A
5. Li-ion/Li0poly:2-4S,or Ni-MH/Ni-Cd:4-12NIMH
6. Connector: Banana Connector (Female)
7. Connector size: 3.5mm
8. Weight: 23g
9. Dimension: 6 x 3 x 1mm

Packages Includes:

1 x ReadytoSky Simonk 30A ESC with 3.5mm Banana Connector (Female)