The GM320S Non-Contact Laser LCD Display Digital Infrared(IR) Thermometer is used to measure the temperature of hot bodies which are generally hard to reach.

This Infrared Temperature Gun is very safe to use in the temperature range of -50°C to 600°C. The Module is very popular because of its useful features like very handy, easy to use, fast response etc.

While using this GM320S Non-Contact Laser LCD Display Digital Infrared(IR) Thermometer just point temperature meter gun towards the object which you want to know the temperature and click the button(make sure that the Laser light is following right on the object) and you are done. The temperature meter gun will display the accurate temperature of the body on LCD Display.

It’s suitable for hot water pipes, hot engine parts, cooking surfaces, hot tubes insulation, electrical connection, ballasts in electric lights, electric motors, bearings, wine coolers hot asphalt, swimming pools, fish tanks, hot & cold food products, heating air conditioning, etc.

Note: Due to some shipping limitations this Gun doesn’t come with AAA batteries you have to buy it separately. 
The product is not Same as shown in video, this video is only for education purpose, The product is as per shown  in image

Features :

1. Precise non-contact IR thermometer, safe and easy to use.
2. Simply point to an object and read its temperature.
3. Laser sight allows for accurate targeting.
4. Consist of optics, temperature sensor, signal amplifier, a processing circuit and LCD display.
5. Laser on/off switch, Auto power off & temperature data hold.
6. 20 seconds auto power off.
7. Celsius and Fahrenheit switchable.
8. Simple One-Handed operation.
9. Lightweight and compact.

Package Includes :

1 x Infrared Temperature Gun (without batteries)

Temperature indicators are installation instruments that can process signals from temperature sensors and show them on the display. Temperature indicators enable the easy and economical valuation of resistance sensors, such as Pt100 or different Thermo element types Are you looking for the best digital Temperature Indicator, then you are at the right place. This is a digital Temperature Indicator, It gives you the best user experience for your projects it is lightweight, high quality, and durable. This voltmeter comes with 7 segment display on it to show output & build with plastic, small and compact, and extremely durable which adds a systematic and classy look to your control dashboard or signal monitoring spot on any device or chassis.

We have added a full range of this digital Temperature Indicator with a variety of colors, sizes, and operating voltages. Explore the category and find the best-suited one for your application

Note: Image may vary from actual product in terms of design, color and brand printed

Features:

1. Easy for installation
2. Compact & small in size
3. This is a digital Temperature Indicator
   
4. Good environmental Protections
5. Very low Power consumption

Package Includes:

1 x Red -20~199℃ 22mm AD16-22TM(AD101-22TM) Round LED Temperature Indicator Light

B3950 10K NTC waterproof High precision thermistor temperature Sensor 5 x 25mm with XH2.54 Connector can be used to measure temperature in a variety of applications.

The sensor has stainless steel 5 x 25mm tip with an XH2.54 connector with a 5-meter cable. It is Negative thermal coefficient (NTC) will decrease. But the formula in practice is not linear,  so sometimes an accurate table of measurements is better than the linear formula. These measurements can usually be found in the datasheet that accompanies the thermistor.

Specifications and Features:

1. Probe sheath material: Stainless Steel
2. Style: B3950 10K
3. Resistance value: 10K ± 1%
4. Measurement range: -20 to 105 °C
5. Cable Length: 5-meter
6. Size of probe: 5 x 25 mm
7. Output wires: 2
8. Typical Dissipation Constant: 5mW/ °C
9. Probe insulation: >100MOhm

Package Includes:

1 x B3950 10K NTC Thermistor Temperature Sensor 5*25mm with XH2.54 Connector with 5-meter Cable

This product specification is applied to the Humidity Sensor Type HCZ-D5. The terminal electrode material uses lead free solder (Sn / Ag / Cu). This product is conformity with RoHS directive which means that lead, cadmium, mercury, hexavelent chromium and specific bromine-based flame retardants have not been used.

Applications:

1. Air conditioner
2. Humidifier
3. Dehumidifier
4. Hygrometer recorder
5. Transmitter

Features:

1. Product: Humidity Sensor
2. Rated Voltage: 1V
3. Humidity Accuracy: +5
4. Operating Frequency Rang: 2KHZ
5. Operating Temperature: 60°C
6. Lightweight

Packages Includes:

1 x MULTI-COMP Humidity Sensor, HCZ Series, 20% to 90% RH, 5 %, Through Hole, Enclosed

The TSD is a contactless temperature measurement system located in a TO5 package. The TSD includes an infrared sensor (thermopile) and
a sensor signal conditioner. The TSD can be interfaced to any microcontroller by an I2C interface. This microcontroller has to calculate the temperature results based on the ADC values and the calibration parameters

Features:

1. 0°C … +100°C measurement range
2. Small size
3.  Up to ±1°C accuracy
4.  I2C Interface
5.  Low current consumption
6.  Operating Temperature Range: -10°C … +85°C

Specifications:

1. ESD rating: -2 to +2
2. Humidity: non-condensing
3. Supply voltage:  -0.3 – +3.63 V
4. Storage temperature: -20 – +85 °C
5.  the voltage at supply and IO pins: -0.5 to V_dd   +0.5   V
6. Current into supply and IO pins: -100 to 100

Package Includes:

1 x Infrared Temperature Sensor, Thermopile, Digital, 0°C to 100°C, I2C Interface

Features & Specifications: