-
Fast ShippingGet the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹2,712.65 (Including tax)
Discount per Bulk Quantity
| Quantity | Discount | Price |
|---|---|---|
| 5 - 10 | 5% | ₹2,577.01 (Including tax) |
| 11 - 20 | 8% | ₹2,495.62 (Including tax) |
| 21 - 40 | 10% | ₹2,441.39 (Including tax) |
| 41 - 100 | 12% | ₹2,387.13 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
AOX3000 is an industrial-grade three-electrode lead-free oxygen sensor. The sensor adopts the principle of the fuel cell, does not contain a lead block inside, and complies with RoHS standards. The design life of AOX3000 is more than 5 years, and the life will not be affected by chemical reaction consumption. The product has a compact structure, small size, fast response, and strong anti-interference ability.
Application Range
AOX3000 lead-free oxygen sensor is mainly used to measure the oxygen concentration in the environment, widely used in coal mines, steel, petrochemical, medical, and other fields, and can be configured in gas detectors, portable safety instruments, oxygen alarms, and gas analyzers and other equipment.
1 x Lead-free oxygen sensor AOX3000
| Max Output Current (mA) |
0.10±0.03 mA(in air) |
|---|---|
| Zero current (offset) |
<1.2% vol.O2 |
| Response Time(T90) |
<15 s |
| Measure Range |
0~30% O2linear outputï¼›30~100% O2non-linear output |
| Working Temperature Range (°C) |
-30~50 ℃ |
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
Out of stock
| Detection Gas |
Oxygen concentration |
|---|---|
| Detection range |
0~100% |
| Working Pressure Range |
0.5~2.0Bar |
| Working Voltage |
3.3~5.5V DC |
| Output Signal |
I2C ,UART (0~3V) ,analog voltage |
| Lifespan |
>2 years (in air) |
| Working Humidity Range |
0-99% RH (non-condensing) |
| Working Temperature Range (°C) |
-20°C ~ +50°C |
| Product Dimensions |
32mm x 27mm/1.26 x 1.06 inch |
| Response Time ( μS) |
<5S |
| Mounting Holes Diameter (mm) |
inner diameter 3.1mm(0.12 inch)/outer diameter 6mm(0.24 inch) |
Out of stock
| Model |
DFRobot Gravity NH3 Sensor |
|---|---|
| Detection Gas |
Ammonia (NH3) |
| Detection range |
0~100ppm |
| Working Voltage |
3.3~5.5V DC |
| Working Current |
<5mA |
| Output Signal |
I2C ,UART (0~3V) ,analog voltage |
| Compatibility |
Arduino ,ESP32 ,Raspberry pi |
| Lifespan |
>2 years (in the air) |
| Working Humidity Range |
15~90%RH (non-condensing) |
| Working Temperature Range (°C) |
-20~50℃ |
| Product Dimensions |
37 x 32mm |
Out of stock
Out of stock
| Heater voltage |
5.0±0.2V DC |
|---|---|
| Circuit Voltage |
5.0±0.2V DC |
| Heater Current |
56±5mA |
| Minimum impedance between Pin#2,3 and GND |
2.5MΩ |
| Operating conditions |
0Ëš~40ËšC ,30~95%RH |
| Temperature differential between inside and outside detector casing |
≤10˚C max. (see NOTE 1) |
| Test gas conditions |
1250±100ppm iso-butane in air at 20˚±2˚C ,65±5%RH |
| Circuit conditions |
VH=5.0±0.05V DC VC=5.0±0.05V DC |
Out of stock
| Product Name |
Figaro TGS 2600 Air Quality Sensor |
|---|---|
| Input Voltage (V) |
5.0±0.2V AC/DC |
| Load Resistance |
variable 0.45kΩ min. |
| Heater Resistance (Ω) |
approx 83Ω at room temp. (typical) |
| Heater current (mA) |
42±4mA |
| Heater power consumption (mW) |
210 |
| Sensor Resistance (kΩ) |
10kΩ ~ 90kΩ in air |
| Sensitivity (change ratio of Rs) |
0.3~0.6 Rs (10ppm of H2)/ Rs air |
Out of stock
| Model number |
TGS5141-P00 |
|---|---|
| Output current in CO |
1.2~3.2nA/ppm |
| Target Gases |
Carbon monoxide |
| Typical detection range |
0 ~ 5 ,000ppm |
| Baseline offset(*1) |
<±10ppm equivalent |
| Operating temperature |
10ËšC ~ +50ËšC (continuous) -20ËšC ~ +60ËšC (intermittent) |
| Operating humidity |
10 ~ 95%RH (no condensation) |
| Response time (T90) |
within 60 seconds |
| Storage conditions |
-10ËšC ~ +50ËšC (continuous) -20ËšC ~ +60ËšC (intermittent |
| Standard test conditions |
20±2˚C ,40±10%RH |
| Weight |
approx. 2.5g |
Out of stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.