A voltage-raising module with a maximum capacity of 8 watts follows the input supply voltage, where the output is fixed at 12 volts. The output can be changed by changing the resistors on the module, to give an output voltage of up to 20 volts.

Features:

1. The possibility of adjusting the output voltage in a wide range of 5-12 volts.
2. The module contains a place for installing the USB jack.
3. It is not recommended that the output voltage be ten times greater than the input voltage to avoid damage and overheating.
4. Equipped with indicator light.

Specifications:

1. Input voltage: 5V~12V
2. Output: 12 volts 8 watts
3. Maximum Input Current: 2A
4. Dimensions: 16 x 33 mm

Package Includes:

1 x Low Voltage High Power Step-Up Regulator Module

The power supply module is straightforward. There is a 2.8 to 5.5 V DC input and the module outputs +12 V and -12 V DC dual power supply voltage with a current rating of a maximum 30 mA. Off course the current output is low but sometimes it suits in many situations where one is looking forward for a small boost converter having such voltage capability and small size. The typical use can be as most operation amplifiers, Digital to analog, and analog to digital converters. The other used one can think about. The beauty of the converter is its small size about an inch and very low price.

Features:

1. Easy to use
2. Easy to do Circuits  Connections
3. Input Voltage Range:2.8V-5.5V
4. Output Voltage:+/-12V (V +:+12V;V-:-12V)
5. Output Current:+12V stable output current capability of 50mA,-12V stable output current capability 30mA,almost meet all ADC, DAC and amplifier applications

Package Includes:

1 x 2.8V-5.5V to ±12V DC Conversion Power Module

Is your project board going to require a 3,3V consistent power supply? Here is the most cost-effective answer to your problem…! Buy this DC-DC 1.8V-5V to 3.3V Booster and Buck Power Modules in a small size (11 x 7 mm) that provides a consistent 3.3V DC output with an input supply range of 1.8 to 5 VDC. The buck-boost module steps up the voltage when the input is less than 3V and steps down the voltage when the input is greater than 3.3V, hence the name.

Circuit Diagram:

Features and Specifications:

1. Input Voltage: 1.5V to 5V DC
2. Output Voltage: 3.3V DC
3. Dimensions (L x W)mm:  11  x 7

Package Includes:

1 x DC-DC 1.8V-5V to 3.3V Boost and Buck Power Module

DC-DC Boost Module (0.9V~5V) to 5V 600MA USB Step-up Board 5V Output

Great Step-up Module with 0.9-5V input, output 5V for many digital devices, so this is really a great module for designing a portable charger. Useful for your USB charger projects and onboard USB device supply solutions. (ie GoPro cameras)

You can supply it with single-cell LiPO or an AA size batter or others. Two AA batteries can output a current of 500 ~ 600MA, a single AA battery power supply can output 200ma current supply, great for mobile phones camera, single-chip, digital products supply.

Applications:

1. USB voltage regulator for USB-powered device.
2. This module will bring the USB voltage required for your application at regulated 5V output.
3. Various USB devices need 5V from low voltage batteries.
4. Charge mobile phone/MP4/MP3 from AA battery when traveling

Features:

1. The module adopts a high-performance imported chip, performance is superior to the common module.
2. Work with indicator light.
3. Take the USB female, a wide range of Uses.
4. A single AA battery power supply can output a current up to 200~300 ma.
5. Two AA batteries to the output current of 500~600 mA.
6. Work from battery voltage as low as 0.9V, allowing you to maximize battery use.
7. If your USB device is critical on 5V operation you can use this module.

Package Includes:

1 x DC-DC 0.9V-5V to 5V 600MA Step-Up Boost USB Module

This DC-DC USB 5V to 24V Boost Power Regulator Module power supply is very convenient to use. You can output 1.2V to 24V adjustable voltage and 3W power as long as you plug in USB or micro USB. It is very suitable for technical engineers to develop, debug and repair instruments. After-sales engineers are on business to supply power to instruments and meters. It is very convenient.

Note:

1. Input voltage from Standard USB or Micro USB or ‘VIN+’ and ‘VIN-’.
2. Turn ON the display screen.
3. Adjust the potentiometer to get the required voltage.
4. Connect load.

1. Features:
2. 1. 1.  Easy to use, plugin USB or micro USB to output 1.2V-24V adjustable voltage.
      2.  Turn off the output with one key.
      3.  The digital tube can be turned off.
      4.  Using a multi-loop precise adjustable potentiometer to regulate
      5.  Power-off storage before power-off.

1. Package Includes:
2. 1 x DC-DC USB 5V to 24V Boost Power Regulator Module

Great Step-up Module with 0.9-5V input, output 5V for many digital devices, so this is really a great module for designing a portable charger. Useful for your USB charger projects and onboard USB device supply solutions. (ie GoPro cameras)

You can supply it with single-cell LiPO or an AA size batter or others. Two AA batteries it can output current of 500 ~ 600MA, a single AA battery power supply can output 200ma current supply, great for mobile phones camera, single-chip, digital products supply.

Applications:

1. USB voltage regulator for USB-powered device.
2. This module will bring the USB voltage required for your application at regulated 5V output.
3. Various USB devices need 5V from low voltage batteries.
4. Charge mobile phone/MP4/MP3 from AA battery when traveling

Features:

1. The module adopts a high-performance imported chip, performance is superior to the common module.
2. Work with indicator light.
3. Take the USB female, a wide range of Uses.
4. A single AA battery power supply can output current up to 200~300 ma.
5. Two AA batteries to the output current of 500~600 mA.
6. Work from battery voltage as low as 0.9V, allowing you to maximize battery use.
7. If your USB device is critical on 5V operation you can use this module.

Specifications:

1. Input voltage: 0.9-5V DC
2. Output voltage: 5V DC
3. Output Current: 500-600mA
4. Load regulation: ±1%
5. Voltage regulation: ±0.5%
6. Input Terminals: Input: IN + input is level, IN-type negative
7. Switching frequency: 500KHz
8. Temperature Range: -40℃ to +85℃
9. Dimension: 18 (mm) x 25 (mm)
10. Weight : 5 g

Package Includes:

1 x DC-DC 0.9V-5V to 5V 600MA Step-Up Boost USB Module