The Mark4  5Inch 225mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. It is known for its toughness and durability.

Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

The frame has a wheelbase of 225mm. It features a very large area on the mainframe for mounting cameras and other accessories. This frame supports 19.3mm board cams as well as cams in cases with mounting brackets.

Its longer top and bottom plate allows easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

Features:

1. Lightweight and Durable.
2. Made by super strong and advanced engineering material.
3. The frame has excellent strength.
4. Equips vibration-free mounting bracket for FPV camera.

Package Includes:

1 x Mark4 5 inch 225mm carbon fiber frame kit

This PIXHAWK 2.4.8 Full Combo Kit consists of all in one required product for the drone flight controller. find all product included in this kit at below package includes.

PIXHAWK PX4 2.4.8 Flight Controller is a high-performance autopilot-on-module suitable for fixed-wing, multi-rotors, helicopters, cars, boats, and any other robotic platform that can move. It is targeted towards high-end research, amateur and industry need, and combines the functionality of the PX4FMU + PX4IO.

A new generation Ublox GPS NEO-M8N, with low power consumption and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy; support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol, and mode or more.

The GPS Folding Antenna Base mount comes will a laser-cut adhesive pad to quickly attached your GPS module, while the mount itself can be fixed to your craft using the base plate M3 hole, or the cross slides.

Note: Product image may vary from the actual product.

Specifications and Features:

Pixhawk V2.4.8 Flight board:

1. The advanced 32-bit ARM CortexM4 high-performance processors can run NuttX RTOS real-time operating system.
2. 14 PWM / servo output.
3. Bus interface (UART, I2C, SPI, CAN).
4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe.
5. Provide automatic and manual modes.
6. Provide redundant power input and failover.
7. Multicolor LED lights.
8. Provide a multi-tone buzzer Interface.
9. Micro SD recording flight data.

Processor:

Sensors:

Interfaces:

1. Color: Black
2. Material: Glass-fiber
3. Suit for the different open-source flight controllers, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4

Because we’ve been in the robotics industry for a long time, we’ve accumulated data and input from our customers on what the most unpleasant aspects of constructing any project or application are. Finding all of the appropriate and right items needed to complete a job is the solution.

And it was then that we came up with the concept of packaging all of the essential components into a single package and naming it a Kit for each project to make things easier for you, as a result, Orange Kits appear in a Picture.

Till now we’ve built over 100+ orange kits for various IoT projects for our creators, and you’ve responded to it very well. So for the next iteration, we’ve considered the Drone Parts because we discovered that purchasing all of the proper and appropriate items to build a drone is a difficult effort. Not to worry, ORANGE DRONE KIT will assist you in building your own drone by simply selecting components from the box to validate our tagline Less Hassle, More Fun..!

With our Drone Kit, we can assure you that there is a very tiny chance that your drone will not fly because the quality and compatibility of the components we have included in the kit have been thoroughly checked by our experienced team.

Package Includes:

1 x Orange KK Flight Controller-Based Q450 Quad Drone Kit

Kit Includes:

1 x KK2.1 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
1 x Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB 
4 x A2212 1000 KV BLDC Brushless DC Motor for Drone (Soldered Connector) 
4 x SimonK 30A BLDC ESC Electronic Speed Controller with Connectors 
3 x Orange HD Propellers 1045(10X4.5) ABS Yellow 1CW+1CCW-1pair
1 x Plastic Landing Gear for Quadcopter 
1 x  JR Male To JR Male Servo Extension Wire-100mm (7 Pcs)
1 x 30cm Lipo Battery Strap Belt Reusable Cable Tie Wrap 
1 x SafeConnect XT60 Male with 14AWG Silicon Wire 10cm
1 x 10 in Allen Key Kit (1.5mm 2mm 2.5mm 3mm 3.5mm 4mm 5mm 6mm 8mm 10mm)
1 x Aluminum Motor M3/M5/M10 Bullet Cap Quick-Release Wrench
1 x SafeConnect Twisted 15cm 22AWG Servo Lead Extention (Futaba) with Hook- 1(4 Pcs)
1 x Nylon Cable Zip Ties 300 mm White (10pcs)
1 x Heat Shrink Sleeve Black Industrial Grade WOER (HST) 

Because we’ve been in the robotics industry for a long time, we’ve accumulated data and input from our customers on what the most unpleasant aspects of constructing any project or application are. Finding all of the appropriate and right items needed to complete a job is the solution.

And it was then that we came up with the concept of packaging all of the essential components into a single package and naming it a Kit for each project to make things easier for you, as a result, Orange Kits appear in a Picture.

Till now we’ve built over 100+ orange kits for various IoT projects for our creators, and you’ve responded to it very well. So for the next iteration, we’ve considered the Drone Parts because we discovered that purchasing all of the proper and appropriate items to build a drone is a difficult effort. Not to worry, ORANGE DRONE KIT will assist you in building your own drone by simply selecting components from the box to validate our tagline Less Hassle, More Fun..!

With our Drone Kit, we can assure you that there is a very tiny chance that your drone will not fly because the quality and compatibility of the components we have included in the kit have been thoroughly checked by our experienced team.

Package Includes:

1 x Orange APM Flight Controller-Based Q450 Quad Drone Kit

Kit Includes:

1 x APM 2.8 Flight Controller with Built-in Compass
1 x Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
1 x NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8
1 x Plastic GPS Antenna Foldable Mount Holder
1 x APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
1 x Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawk
4 x SimonK 30A BLDC ESC Electronic Speed Controller with Connectors
4 x A2212 1000 KV BLDC Brushless DC Motor for Drone (Un-soldered Connector)
3 x Orange HD Propellers 1045(10X4.5) ABS Yellow 1CW+1CCW-pair
1 x Plastic Landing Gear for Quadcopter
7 x JR Male To JR Male Servo Extension Wire (100mm)
1 x Nylon Cable Zip Ties 300 mm White (10pcs)
1 x 30cm Lipo Battery Strap 
1 x 10 in Allen Key Kit (1.5mm 2mm 2.5mm 3mm 3.5mm 4mm 5mm 6mm 8mm 10mm)
1 x Aluminum Motor M3/M5/M10 Bullet Cap Quick-Release Wrench
1 x SafeConnect XT60 Male with 14AWG Silicon Wire 10cm
1 x Micro USB Cable  (50cm)
4 x SafeConnect Twisted 15cm 22AWG Servo Lead Extention (Futaba) with Hook

The Mark4  7Inch 295mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. It is known for its toughness and durability.

Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

The frame has a wheelbase of 295mm. It features a very large area on the mainframe for mounting cameras and other accessories. This frame supports 19.3mm board cams as well as cams in cases with mounting brackets.

Its longer top and bottom plate allows easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

Features:

1. Lightweight and Durable.
2. Made by super strong and advanced engineering material.
3. The frame has excellent strength.
4. Equips vibration-free mounting bracket for FPV camera.

Package Includes:

1 x Mark4 7inch 295mm Carbon Fiber Frame Kit

If you want to build your first drone model on your own, then this kit is for you. The kit includes everything you’ll need to create the best drone model possible as a beginner.

For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio-controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.

HSKRC 3 Inch 140mm Carbon Fiber Racing Kit

The HKSRC 3 inch 140 mm Frame was designed specifically to address the challenges of quadcopter racing and video recording. The frame is made of carbon fiber and has excellent electrical and tensile properties. This HSKRC 3 Inch 140mm Carbon Fiber Racing Drone Frame is made from carbon fiber which makes it tough and durable. The frame is light and has thick arms, allowing it to provide good mechanical strength. The frame’s aerodynamic efficiency is enhanced by the mini design. It has a wheelbase is about 140 mm. It is featuring a large space in the mainframe for mounting the camera and other accessories.

More information about HSKRC 3 Inch 140mm Carbon Fiber Racing Frame is available at Robu.in.

Explore our Drone parts category for other accessories like propellers, FPV cameras, Telemetry, and Remote Transmitter and Receiver. Click Here

Package Includes:

1 x HSKRC 3 Inch 140mm Carbon Fiber Racing Frame

2 x RS1507 3800KV 2-3S Brushless Motor CW

2 x RS1507 3800KV 2-3S Brushless Motor CCW

1 x FPV camera

2 X CW,CCW HSKRC propeller(2 package)

1 x 5.8G 5dBi Micro Antenna RP-SMA

1 x Mini F3+OSD

1 x MINI XF5805 5.8G Transmitter

1 x Readytosky 4 IN 1 25A 2-5S BLHeli_S ESC For Mini Flytower