Mark4 6 Inch 260mm Carbon Fiber Racing Frame Kit

SKU: 1010939
In Stock

2,059.00

  1. Model: MARK4
  2. Wheelbase: 250mm
  3. Material: Full Carbon Fiber
  4. Arm Thickness:5 mm
  5. Weight: 160 gm
In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Category:

Description

The Mark4 6 Inch 260mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. It is known for its toughness and durability.

The Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

The frame has a wheelbase of 260mm. It features a very large area on the mainframe for mounting cameras and other accessoriesThis frame supports 19.3mm board cams as well as cams in cases with mounting brackets.

Its longer top and bottom plate allows easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

 

 


Features:

  1. Lightweight and Durable.
  2. Made by super strong and advanced engineering material.
  3. The frame has excellent strength.
  4. Equips vibration-free mounting bracket for FPV camera.

Package Includes:

1 x Mark4 6 Inch 260mm Carbon Fiber Racing Frame Kit

Additional information

Model

Mark4

Compatible Propellers Size (inch)

6

Wheelbase (mm)

260

Arm Size (L x W) mm

140×20

Thickness (mm)

5

Weight (gm)

142

Quick Comparison

SettingsMark4 6 Inch 260mm Carbon Fiber Racing Frame Kit removeCapro-X’3 HX155mm FPV Racing Kit removeRobocat 270 Racing Quadcopter Frame removeAPEX DC HD 5″ FPV Frame Kit removeOrange APM Flight Controller Based Q450 Quad Drone Kit removeOrange Pixhawk Flight Controller based Q450 Quad Drone Kit remove
NameMark4 6 Inch 260mm Carbon Fiber Racing Frame Kit removeCapro-X’3 HX155mm FPV Racing Kit removeRobocat 270 Racing Quadcopter Frame removeAPEX DC HD 5″ FPV Frame Kit removeOrange APM Flight Controller Based Q450 Quad Drone Kit removeOrange Pixhawk Flight Controller based Q450 Quad Drone Kit remove
Image
SKU10109391010943974870129563911953581195360
Rating
Price2,059.0011,169.001,929.003,079.0013,499.0029,749.00
Stock
In Stock
Out of stock
Out of stock
In Stock
Out of stock
Out of stock
AvailabilityIn StockOut of stockOut of stockIn StockOut of stockOut of stock
Add to cart

Add to cart

Read more

Read more

Add to cart

Read more

Read more

Description
  1. Model: MARK4
  2. Wheelbase: 250mm
  3. Material: Full Carbon Fiber
  4. Arm Thickness:5 mm
  5. Weight: 160 gm
  1. Model: Capro X’3
  2. Wheelbase: 155mm
  3. Structure: HX type split
  4. Material: 3K Carbon Fiber
  5. Bottom Plate Thickness: 3mm
  6. Upper Plate Thickness: 1.5mm
  1. Approx 270mm motor to motor
  2. Material – carbon fibre
  3. Removable canopy made from shock-absorbing PC material
  4. Flying Weight -410-430g (battery excluded)
  5. Model net weight: 210 g± 3g
  1. Product: APEX DC HD 5″ FPV Frame Kit
  2. Material: Carbon Fiber
  3. Total Product: 229g
  4. Product Type: DIY Frame Kit
  5. Easy to assemble kit

APM 2.8 Flight Controller with Built-in Compass
Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A

  1. Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot – Good Quality
  2. NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8
  3. Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
  4. High-Quality EMAX MT2213 935KV Brushless DC Motor for Drone
Content

The Mark4 6 Inch 260mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. It is known for its toughness and durability.

The Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

The frame has a wheelbase of 260mm. It features a very large area on the mainframe for mounting cameras and other accessoriesThis frame supports 19.3mm board cams as well as cams in cases with mounting brackets.

Its longer top and bottom plate allows easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

 

 


Features:

  1. Lightweight and Durable.
  2. Made by super strong and advanced engineering material.
  3. The frame has excellent strength.
  4. Equips vibration-free mounting bracket for FPV camera.

Package Includes:

1 x Mark4 6 Inch 260mm Carbon Fiber Racing Frame Kit

If you want to build your first drone model on your own, then this kit is for you. The kit includes everything you’ll need to create the best drone model possible as a beginner.

For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio-controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.

If you are about to have a great flying drone or quadcopter designed all by you. OKAY GREAT, But having a limited budget ??

Then here is the best deal for you!!!!

This is our best market cracking Racing/ fixed-wing/ Brushless/ UAV Motor when it comes to Robu.in bestselling drone motors. The uniqueness of this RC BLDC Motor lies in its low cost and highly satisfying performance on the fly.

 

 


Features:

  1. Carbon Fiber and 3D printed material
  2. Lightweight and Durable.
  3. The frame has Excellent Strength.
  4. No trouble in racing indoor and outdoor.

Specifications:

  1. Model: Capro X’3
  2. Wheelbase: 155mm
  3. Structure: HX type split
  4. Material: 3K Carbon Fiber
  5. Bottom Plate Thickness: 3mm
  6. Upper Plate Thickness: 1.5mm
  7. Internal Standoff Height: about 30mm

Package Includes;

1 x Capro- X’3 HX155mm FPV Racing Kit

Kit Includes:

1 x Capro-X’3 HX155mm FPV Racing Drone Frame with Prop Protectors
1 x Fitting  Bolts and stand off set 
1 x Mini Flytower F4+OSD Flight Controller

1 x CMOS 1/3 700TVL 1.2 mm FPV Camera 
1 x XF5805 V6.1 5.8G FPV transmitter
1 x 5.8G 5 dBi Micro Antenna with RP-SMA Connector for XF5805

1 x 2S~3S 4in1 Brushless ESC for 3800KV Brushless Motor
2 x Ready to Sky 3800KV Brushless Motor-CW 
2 x Ready to Sky 3800KV Brushless Motor-CCW
4 x 3045 Tri-Blade Propellor(2 x CW + 2 x CCW)-Black
4 x 3045 Tri-Blade Propellor(2 x CW + 2 x CCW)-Red

1 x Brackets, Damping Pad and Accesories Set

Robocat was designed with aerodynamics in mind. The carbon fiber we use allows us to create a sturdy but lightweight structure. For the Canopy, we took into account the ease of maintenance. The design incorporates a hinge feature allowing for easy access to the electronic insides.
With an eye-catching form paired with a streamlined Canopy, high speeds are achievable due to the low drag. The Canopy comes in different colors suitable for various situations. The Canopy is made from shock-absorbing PC material. If you have FPV racing on your mind, then this is the number one quadcopter for you.
Build from pure carbon fiber, 1.5mm thick fuselage & 3mm thick arms, Robocat 270 Racing Quadcopter Frame can be fitted with 1806 to 2206 sized motors, 12A speed controller, CC3D & Mini KK2.1 Flight controller, 3 to 4S 1500mah Lipo battery, 32mm CCTV Camera, 5.8G video Transmitter, 5 inches propeller.

Note: The cover on the frame comes in different colors, we will ship it according to availability.


Features:

  1. 270 size FPV racing quad frame
  2. Super tough and durable all 4k weave carbon fiber construction
  3. Eye-catching Lexan body shell design available in several colors
  4. Unique rotating frame design allows easy access to electronics
  5. Plenty of space for electronics and FPV equipment
  6. Individual component mounting options for a neat and tidy install
  7. Pre-angled FPV camera mount for high-speed flight

Package Includes:

1 x Robocat 270 Racing Quadcopter Frame

The Apex DC is a variation on the typical ‘dead cat’ frame which we have modified to keep the front and rear motors aligned, allowing us to maintain the much loved compressed-x geometry in the motor layout.

This ensures the frame remains balanced and flight characteristics are not compromised, unlike the classic ‘dead cat’ design which moves the rear motors closer to the body and severely impacts handling.

A major drawback of the Caddx Vista system is that the body of the unit is grounded, this can cause the conductive carbon fiber plates and frame hardware to be grounded too. In an ideal world this is not necessarily a problem, however in the real world it’s an accident waiting to happen.

By modifying only the upper and lower main plates we retained full compatibility with regular Apex arms, using standard 5″ arms at the front and standard 6″ arms at the back.Included with the Apex-DC are newly redesigned 3D printed insulation inserts. This keeps the camera firmly locked in place and reduces vibrations, whilst ensuring it is electrically isolated from the frame.


Specifications:

  1. Product: Drone Frame Kit
  2. Material: Carbon Fiber
  3. Total Product: 229g
  4. Product Type: DIY Frame Kit
  5. Color: Black &  Blue
  6. Easy to assemble kit
  7. Propeller: 5Inch
  8. Wheelbase: 250mm
  9. Arms plate: 5.5mm
  10. Top plate: 2.0mm
  11. Bottom plate: 2.5mm
  12. Side plate: 2.0mm

Packages Includes:

1 x APEX DC HD 5″ FPV Frame Kit

Because we’ve been in the robotics industry for a long time, we’ve accumulated data and input from our customers on what the most unpleasant aspects of constructing any project or application are. Finding all of the appropriate and right items needed to complete a job is the solution.

And it was then that we came up with the concept of packaging all of the essential components into a single package and naming it a Kit for each project to make things easier for you, as a result, Orange Kits appear in a Picture.

Till now we’ve built over 100+ orange kits for various IoT projects for our creators, and you’ve responded to it very well. So for the next iteration, we’ve considered the Drone Parts because we discovered that purchasing all of the proper and appropriate items to build a drone is a difficult effort. Not to worry, ORANGE DRONE KIT will assist you in building your own drone by simply selecting components from the box to validate our tagline Less Hassle, More Fun..!

With our Drone Kit, we can assure you that there is a very tiny chance that your drone will not fly because the quality and compatibility of the components we have included in the kit have been thoroughly checked by our experienced team.


Package Includes:

1 x Orange APM Flight Controller-Based Q450 Quad Drone Kit

Kit Includes:

1 x APM 2.8 Flight Controller with Built-in Compass
1 x Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
1 x NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8
1 x Plastic GPS Antenna Foldable Mount Holder
1 x APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
1 x Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawk
4 x SimonK 30A BLDC ESC Electronic Speed Controller with Connectors
4 x A2212 1000 KV BLDC Brushless DC Motor for Drone (Un-soldered Connector)
3 x Orange HD Propellers 1045(10X4.5) ABS Yellow 1CW+1CCW-pair
1 x Plastic Landing Gear for Quadcopter
7 x JR Male To JR Male Servo Extension Wire (100mm)
1 x Nylon Cable Zip Ties 300 mm White (10pcs)
1 x 30cm Lipo Battery Strap 
1 x 10 in Allen Key Kit (1.5mm 2mm 2.5mm 3mm 3.5mm 4mm 5mm 6mm 8mm 10mm)
1 x Aluminum Motor M3/M5/M10 Bullet Cap Quick-Release Wrench
1 x SafeConnect XT60 Male with 14AWG Silicon Wire 10cm
1 x Micro USB Cable  (50cm)
4 x SafeConnect Twisted 15cm 22AWG Servo Lead Extention (Futaba) with Hook

 

Because we’ve been in the robotics industry for a long time, we’ve accumulated data and input from our customers on what the most unpleasant aspects of constructing any project or application are. Finding all of the appropriate and right items needed to complete a job is the solution.

And it was then that we came up with the concept of packaging all of the essential components into a single package and naming it a Kit for each project to make things easier for you, as a result, Orange Kits appear in a Picture.

Till now we’ve built over 100+ orange kits for various IoT projects for our creators, and you’ve responded to it very well. So for the next iteration, we’ve considered the Drone Parts because we discovered that purchasing all of the proper and appropriate items to build a drone is a difficult effort. Not to worry, ORANGE DRONE KIT will assist you in building your own drone by simply selecting components from the box to validate our tagline Less Hassle, More Fun..!

With our Drone Kit, we can assure you that there is a very tiny chance that your drone will not fly because the quality and compatibility of the components we have included in the kit have been thoroughly checked by our experienced team.


Package Includes:

1 x Orange Pixhawk Flight Controller based Q450 Quad Drone Kit

Kit includes:

1 x Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot – Good Quality
1 x NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8
1 x Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
2 x EMAX MT2213 935KV Brushless DC Motor for Drone- Red Cap (CCW) With 1045 Propeller Combo
2 x EMAX MT2213 935KV Brushless DC Motor for Drone-Black Cap (CW) With 1045 Propeller Combo
1 x Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawk
1 x Plastic GPS Antenna Foldable Mount Holder
4 x Emax BLHeli Series 30A ESC with Oneshot (Original)
1 x Q450 Compatible Plastic Landing Gear
1 x APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
1 x Nylon Cable Zip Ties 300 mm White (10pcs)
1 x PolyMax 3.5mm Gold Male/Female Connector pair (6-Pcs)
1 x JR Male To JR Male Servo Extension Wire (100mm) (7 Pcs)
1 x 30cm Reusable Lipo Battery Strap
1 x 10 in 1 Allen Key Kit (1.5mm 2mm 2.5mm 3mm 3.5mm 4mm 5mm 6mm 8mm 10mm)
1 x Aluminum Motor M3/M5/M10 Bullet Cap Quick-Release Wrench
1 x SafeConnect XT60 Male with 14AWG Silicon Wire 10cm-1Pcs.
1 x Micro USB Cable-Black (50 cm)
1 x Heat Shrink Sleeve
4 x SafeConnect Twisted 15cm 22AWG Servo Lead Extention (Futaba) with Hook

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Model

Mark4

Compatible Propellers Size (inch)

6

Wheelbase (mm)

260

Arm Size (L x W) mm

140×20

Thickness (mm)

5

Weight (gm)

142

Frame Diameter

270mm

Material

Carbon Fiber + Aluminum

Frame Weight

190g

Motor Mount Bolt Hole spacing

16, 19mm