The Mark4  7Inch 295mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. It is known for its toughness and durability.

Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

The frame has a wheelbase of 295mm. It features a very large area on the mainframe for mounting cameras and other accessories. This frame supports 19.3mm board cams as well as cams in cases with mounting brackets.

Its longer top and bottom plate allows easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

Features:

1. Lightweight and Durable.
2. Made by super strong and advanced engineering material.
3. The frame has excellent strength.
4. Equips vibration-free mounting bracket for FPV camera.

Package Includes:

1 x Mark4 7inch 295mm Carbon Fiber Frame Kit

Because we’ve been in the robotics industry for a long time, we’ve accumulated data and input from our customers on what the most unpleasant aspects of constructing any project or application are. Finding all of the appropriate and right items needed to complete a job is the solution.

And it was then that we came up with the concept of packaging all of the essential components into a single package and naming it a Kit for each project to make things easier for you, as a result, Orange Kits appear in a Picture.

Till now we’ve built over 100+ orange kits for various IoT projects for our creators, and you’ve responded to it very well. So for the next iteration, we’ve considered the Drone Parts because we discovered that purchasing all of the proper and appropriate items to build a drone is a difficult effort. Not to worry, ORANGE DRONE KIT will assist you in building your own drone by simply selecting components from the box to validate our tagline Less Hassle, More Fun..!

With our Drone Kit, we can assure you that there is a very tiny chance that your drone will not fly because the quality and compatibility of the components we have included in the kit have been thoroughly checked by our experienced team.

Package Includes:

1 x Orange APM Flight Controller-Based Q450 Quad Drone Kit

Kit Includes:

1 x APM 2.8 Flight Controller with Built-in Compass
1 x Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
1 x NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8
1 x Plastic GPS Antenna Foldable Mount Holder
1 x APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
1 x Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawk
4 x SimonK 30A BLDC ESC Electronic Speed Controller with Connectors
4 x A2212 1000 KV BLDC Brushless DC Motor for Drone (Un-soldered Connector)
3 x Orange HD Propellers 1045(10X4.5) ABS Yellow 1CW+1CCW-pair
1 x Plastic Landing Gear for Quadcopter
7 x JR Male To JR Male Servo Extension Wire (100mm)
1 x Nylon Cable Zip Ties 300 mm White (10pcs)
1 x 30cm Lipo Battery Strap 
1 x 10 in Allen Key Kit (1.5mm 2mm 2.5mm 3mm 3.5mm 4mm 5mm 6mm 8mm 10mm)
1 x Aluminum Motor M3/M5/M10 Bullet Cap Quick-Release Wrench
1 x SafeConnect XT60 Male with 14AWG Silicon Wire 10cm
1 x Micro USB Cable  (50cm)
4 x SafeConnect Twisted 15cm 22AWG Servo Lead Extention (Futaba) with Hook

Because we’ve been in the robotics industry for a long time, we’ve accumulated data and input from our customers on what the most unpleasant aspects of constructing any project or application are. Finding all of the appropriate and right items needed to complete a job is the solution.

And it was then that we came up with the concept of packaging all of the essential components into a single package and naming it a Kit for each project to make things easier for you, as a result, Orange Kits appear in a Picture.

Till now we’ve built over 100+ orange kits for various IoT projects for our creators, and you’ve responded to it very well. So for the next iteration, we’ve considered the Drone Parts because we discovered that purchasing all of the proper and appropriate items to build a drone is a difficult effort. Not to worry, ORANGE DRONE KIT will assist you in building your own drone by simply selecting components from the box to validate our tagline Less Hassle, More Fun..!

With our Drone Kit, we can assure you that there is a very tiny chance that your drone will not fly because the quality and compatibility of the components we have included in the kit have been thoroughly checked by our experienced team.

Package Includes:

1 x Orange DJI NAZA Flight Controller based Q450 Quad Drone Kit

Kit Includes:

1 x DJI Naza M Lite Multi-Rotor Flight Controller without GPS
1 x FPV NEO-M8N GPS amp Compass Support DJI Naza M V1 & V2 Lite Flight Controller
1 x Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
2 x EMAX MT2213 935KV Brushless DC Motor for Drone – Red Cap (CCW) With 1045 Propeller Combo
2 x EMAX MT2213 935KV Brushless DC Motor – Black Cap (CW Motor Rotation) With 1045 Propeller Combo
4 x Emax BLHeli Series 30A ESC with Oneshot (Original)
1 x Nylon Cable Zip Ties 300 mm White (10pcs)
1 x PolyMax 3.5mm Gold Male/Female Connectors PAIRS (6-Pcs)
1 x F450/F550 Frame Landing Gear
1 x 30cm Lipo Battery Strap Belt
1 x SafeConnect XT60 Male with 14AWG Silicon Wire 10cm
1 x Aluminum Motor M3/M5/M10 Bullet Cap Quick-Release Wrench
1 x 10 in Allen Key Kit (1.5mm 2mm 2.5mm 3mm 3.5mm 4mm 5mm 6mm 8mm 10mm)
1 x Heat Shrink Sleeve 6mm Black 2 Meter Industrial Grade WOER (HST)

The Mark3 145mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quad-copters. It is known for its toughness and durability.

Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

The frame has a wheelbase of 145mm. It features a very large area on the mainframe for mounting cameras and other accessories. This frame supports board cams as well as cams in cases with mounting brackets.

Its longer top and bottom plate allows easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

Features:

1. Compact size
2. High performance
3. Lightweight and Durable.
4. Made by super strong and advanced engineering material.
5. The frame has excellent strength.
6. Equips vibration-free mounting bracket for FPV camera.
7. This is DIY drone Frame Kit for your projects

Specifications:

1. Wheelbase: 145mm
2. Weight: 50G
3. Material: Carbon Fiber
4. Thickness: upper plate 2.0mm, side plate 2.0mm, bottom plate 2.0mm, splint 2.0mm, machine arm 4.0mm
5. Paddle: 3.0 inch paddle
6. Flight control hole distance: 20 x 20mm (M2)
7. The distance between the rear image transmission holes: 20*20mm (M2)
8. Camera installation width: 14mm
9. Motor mounting holes: 9 x 9mm(M2), 12 x 12mm(M2)
10. Adapt to the VISTA sky terminal
11. Adapt 915 antenna

Packages Includes:

1 x Mark’3 145mm Carbon Fiber Frame Kit

The Mark4 6 Inch 260mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. It is known for its toughness and durability.

The Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

The frame has a wheelbase of 260mm. It features a very large area on the mainframe for mounting cameras and other accessories. This frame supports 19.3mm board cams as well as cams in cases with mounting brackets.

Its longer top and bottom plate allows easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

Features:

1. Lightweight and Durable.
2. Made by super strong and advanced engineering material.
3. The frame has excellent strength.
4. Equips vibration-free mounting bracket for FPV camera.

Package Includes:

1 x Mark4 6 Inch 260mm Carbon Fiber Racing Frame Kit

If you want to build your first drone model on your own, then this kit is for you. The kit includes everything you’ll need to create the best drone model possible as a beginner.

For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio-controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.

If you are about to have a great flying drone or quadcopter designed all by you. OKAY GREAT, But having a limited budget ??

Then here is the best deal for you!!!!

This is our best market cracking Racing/ fixed-wing/ Brushless/ UAV Motor when it comes to Robu.in bestselling drone motors. The uniqueness of this RC BLDC Motor lies in its low cost and highly satisfying performance on the fly.

Features:

1. Carbon Fiber and 3D printed material
2. Lightweight and Durable.
3. The frame has Excellent Strength.
4. No trouble in racing indoor and outdoor.

Specifications:

1. Model: Capro X’3
2. Wheelbase: 155mm
3. Structure: HX type split
4. Material: 3K Carbon Fiber
5. Bottom Plate Thickness: 3mm
6. Upper Plate Thickness: 1.5mm
7. Internal Standoff Height: about 30mm

Package Includes;

1 x Capro- X’3 HX155mm FPV Racing Kit

Kit Includes:

1 x Capro-X’3 HX155mm FPV Racing Drone Frame with Prop Protectors
1 x Fitting  Bolts and stand off set 
1 x Mini Flytower F4+OSD Flight Controller

1 x CMOS 1/3 700TVL 1.2 mm FPV Camera 
1 x XF5805 V6.1 5.8G FPV transmitter
1 x 5.8G 5 dBi Micro Antenna with RP-SMA Connector for XF5805

1 x 2S~3S 4in1 Brushless ESC for 3800KV Brushless Motor
2 x Ready to Sky 3800KV Brushless Motor-CW 
2 x Ready to Sky 3800KV Brushless Motor-CCW
4 x 3045 Tri-Blade Propellor(2 x CW + 2 x CCW)-Black
4 x 3045 Tri-Blade Propellor(2 x CW + 2 x CCW)-Red

1 x Brackets, Damping Pad and Accesories Set