This Official Raspberry Pi M12 Lens with 12 Megapixel resolution having  8mm lense size can be use for portrait photography. The lens has 56 deg FOV.

Features:

1. Easy to use
2. Compact design
3. Low power consumption
4. High signal-to-noise ratio (SNR)

Specifications:

1. Model number: GJ-M12-8IR
2. Resolution: 12MP
3. Aperture: F1.8
4. Mount: M12
5. Image format: 1/1.7″
6. FOV(D/H/V): 72.64°/57.12°/42.44°

Packages Includes:

1 x Official Raspberry Pi M12 Lens, 12 Megapixel, 8mm, portrait lens

Connect latest Raspberry Pi 4 with this Official Micro HDMI (Male) to Standard HDMI (Male) Cable, It has nice moulded grips for easy installation,  Nickel plated connectors and Mylar-foil shielding for highspeed data transmission. With  1 meter long (about 3 feet) allows you to easily connect the HD devices (such as HD camcorder, digital camera, etc.), and mobile phones. This is an HDMI 1.3 cable. As latest Raspberry Pi 4 board upgraded with 2 x Micro-HDMI Port with 4K@60p resolution support, therefore your old Standard cable won’t work with Pi 4 Version.

This cable will connect your Pi 4 with any External devices which support up to a 4K resolution and high-speed data transmission. Watch the video, stream media, with multiple audio formats from stereo to multi-channel sound and view documents through your TV Screen.

This RoHS-compliant cable allows you to transfer movies, photos, and videos from devices like smartphones, digital cameras, and video cameras with micro-HDMI connectors to view on your standard HDMI (type-A) television, projector, or computer monitor.

This is a must-have accessory for those who use the latest gadgets and electronics developments boards like Raspberry Pi 4 as well as who would like to watch videos and work on the big screen.

Explore the All Varients of Raspberry Pi Boards and Accessories we made available for you at robu.in

Note:

The cable may vary in terms of packaging from the manufacturer

Features:

1. Fully compatible with High-Speed HDMI with Ethernet specification (Version 1.4).
2. A superb cable with excellent audio-visual transfer properties that deliver signal without compromising purity and balance.
3. Nickel-plated connectors for highest signal transfer rate and resistance in corrosion.
4. A large gauge PVC jacket provides maximum shielding against wear and tear and extreme temperatures.
5. Reinforced quad-layer braided shielding and Mylar-foil shielding provides utmost protection against RF and EM interference.
6. Moulded strain-relief design lessens plug/socket pressure.
7. Designed to meet all HDMI standards.
8. Supports 480i, 480p, 720p, 1080i, 1080p, 1440p and 4K@60p resolution HDMI plug to HDMI plug leads
9. Compatible with Raspberry Pi 4 Model B and all previous Raspberry Pi models

You may also interested in:

1. Combo of Raspberry Pi 4B + Micro-HDMI Cable + Micro USB-B (F) to USB Type C (M) Adapter
2. Raspberry Pi 4 Model-B with 1 GB RAM
3. Raspberry Pi 4 Model-B with 2 GB RAM
4. Raspberry Pi 4 Model-B with 4 GB RAM
5. Micro USB-B Female to USB Type C Male Adapter for Raspberry Pi 4
6. Acrylic Case for Raspberry Pi 4 Model B

Package Includes:

1 x Micro HDMI (Male) to Standard HDMI (Male) Cable Black

Raspberry Pi released an official 48W (8V DC, 6A) power supply, designed for use with the Raspberry Pi Build HAT. Similarly, it can also power the Raspberry Pi via the BuildHAT.

Power your Raspberry Pi Build HAT projects with the Raspberry Pi Build HAT Power Supply. This 48W power supply will power the Build HAT and connected LEGO  Technic motors, as well as your Raspberry Pi computer. Compatible with LEGO Technic motors and sensors included in the LEGO Education SPIKETM Portfolio, the Build HAT combines the power of Raspberry Pi computing with easy building opportunities to help you make creative and robust projects.

Features:

• Input: 110-240V AC
• Output: 8V DC, 6A
• Cable: 1.5M, 16 awg (Premium Quality)

Technical Specifications:

Output

1. Output voltage: +8.0V DC
2. Minimum load current: 0.01A
3. Nominal load current: 6.0A
4. Maximum power: 48.0W
5. Load regulation: ±5%
6. Line regulation: ±5%
7. Ripple & noise: 200mVp-p
8. Rise time: 100ms maximum to regulation limits for DC outputs
9. Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
10. Protection: Short circuit protection, Overcurrent protection, Overvoltage protection
11. Efficiency: 87.77% minimum (output current from 100%, 75%, 50%, 25%)
12. Output cable: 1.5m 16AWG
13. Output connector: Barrel connector 5.5mm × 2.1mm × 11mm Centre positive

Input

1. Voltage range: 100-240Vac (rated) 96-264Vac (operating)
2. Frequency: 50/60Hz ±3Hz
3. Current: 1.2A maximum
4. Power consumption (no load): 0.1W maximum
5. Inrush current: No damage shall occur and the input fuse shall not blow

Package Includes:

1 x Raspberry Pi Build Hat Power Supply

After a long wait of almost 7 years, the Raspberry Pi released the camera-3 series, the successor to the Camera module 2 series. This newest addition of Raspberry Pi Camera 3 NoIR to the Raspberry Pi mainstream camera lineup replaces the wildly successful Camera Module 2, which was introduced in April 2016.

The all-new Raspberry Pi Camera 3 Standard/Wide is a camera for Raspberry Pi computers. Featuring autofocus and a 12-megapixel sensor and supported by Raspberry Pi’s Picamera2 Python library, Camera Module 3 gives you excellent image quality with precise control.
Raspberry Pi Camera 3 NoIR came up with significant improvements over Camera Module 2, which is built around a 12-megapixel Sony IMX708 image sensor. Additionally, Camera Module 3 is offered with a normal (76°) or wide-angle (120°) lens, as well as in regular and infrared-sensitive (NoIR) versions.

• The standard variant is designed to take pictures in normal light.
• The NoIR variant doesn’t have an infrared filter, so you can use it together with an infrared light source to take pictures in the dark.

Below is the short spec comparison of all variants:

Features:

• Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
• High signal-to-noise ratio (SNR)
• Built-in 2D Dynamic Defect Pixel Correction (DPC)
• Phase Detection Autofocus (PDAF) for rapid autofocus
• QBC Re-mosaic function
• HDR mode (up to 3-megapixel output)
• CSI-2 serial data output
• 2-wire serial communication (supports I2C fast mode and fast-mode plus)
•  2-wire serial control of focus mechanism
• Improved low-light sensitivity.
• High dynamic range (HDR) support.
• Sony IMX708 12MP sensor with 12C-controlled focus actuator
• Large 7.4mm diagonal sensor
• Resolution: 12 Megapixel
• Diagonal Viewing Angle: 76º
• Compatible with all models of Raspberry Pi*

*Note: To connect with Raspberry Pi Zero models this camera requires a special camera cable. Buy Now

Package Includes:

1 x Raspberry Pi Camera Module 3 – NoIR

All Variants:

This is the 2.7mm Wide Angle Lens, an add-on for the M12 Raspberry Pi High-Quality Camera. It has a wide field of view and a variety of uses, like CCTV applications, or of course, cat photos. Includes a thumbscrew to quickly and easily assemble onto the HQ Camera Board.

Wide-angle lenses are good for getting shots of a big area, wildlife cameras, security cameras, doorbell cams, etc. The video may be distorted around the edges to fit it all into the sensor.

For use with the M12 Raspberry Pi High-Quality Camera only. We also carry a 25mm 5MP Telephoto Lens.

Features:

1. Easy to use
2. Compact design
3. Low power consumption
4. High signal-to-noise ratio (SNR)
5. Built-in 2D Dynamic Defect Pixel Correction (DPC)
6. Phase Detection Autofocus (PDAF) for rapid autofocus

Specifications:

1. Model: Model
2. Resolution: 12M
3. Focal length: 2.7mm
4. Aperture (F/NO): 2.8
5. Back focus length: 4.97mm
6. DISTORTION: <-1.5%
7. Mount: M12*P0.5
8. Operating temperature:  -30 ~ +70°C
9. Construction: 5G2P+IR
10. Weight: 6g

Packages includes:

1  x  Official Raspberry Pi 12MP 2.7MM Wide-angle lens

Dedicated 3007 Cooling Fan For Raspberry Pi Compute Module 4 CM4, Low Noise, With Thermal Tapes, 5V/12V Power Supply(Optional)

Features:

1. Low Noise, With Thermal Tapes
2. Low-profile, PWM speed adjustment
3. 4-wire PWM speed-adjustable fan header

Specifications: 

1. Rated Power: 1W (5V, 0.2±0.02A) 1.62W (12V, 0.135±0.02A)
2. Rated Speed: 5000±10%RPM 8000±10%RPM
3. General Low-profile, PWM speed adjustment
4. Interface: 4-wire PWM speed-adjustable fan header
5. Cable Length: 90±10mm
6. Dimension: 54×39×13mm

Package Includes:

1 x Waveshare Dedicated 3007 Cooling Fan for Raspberry Pi Compute Module 4 CM4, Low Noise, 5V