This is a PWM detector, displays the pulse width and frequency of PWM(slide the switch to select), accurate reading, quick display update can analyze the problem of accurate positioning. Range 50-9950us (the pulse width of the remote controller is generally 1000-2000us, and the robot’s pulse width is 500us-2500us).

Can be used as see-saw testing of remote control( with it you can do it by yourself without others’ help). Display”NO” when no signal(when it losses thePWM signal more than the 70s, it will be regarded as no signal). With “+””-”  for anti-reverse connection.

Features:

1. Upgraded PWM tester, smaller and better performance.
2. For the testing receiver, fight controller, and servo.
3. It Can analyze the problem of accurate positioning.

Package Includes:

1 x PMW Tester with cable

The LC ICL8038 module is designed for common frequency ranges. It is adjustable from 5 gears and generates low-distortion triangular waves, square and sine waves from 10Hz to 450KHz. A sine wave can be used for test signals, drive signals, carrier frequency signals, etc; a square wave can be used for switching signals, trigger signals, etc; the triangular wave is mainly used for scanning signals.

Function:

1. VCC, GND: working voltage
2. AC: with DC bias output
3. G: ground
4. DC: pure signal output
5. R11: Frequency adjustment
6. R12: Square wave duty cycle adjustment
7. R13: Sine wave linear adjustment
8. R14: Amplitude adjustment
9. R15: Square wave linear adjustment
10. Jumper P2: select different wave-forms(triangular, square or sine waves)
11. Jumper P3: select different frequency ranges
    10Hz-450Hz,90Hz-1.5KHz,940Hz-15KHz,6KHz-120KHz,20KHz-450KHz

Features:

1. The LC ICL8038 module is designed for common frequency ranges.
2.  It is adjustable from 5 gears and generates low-distortion triangular waves, square and sine waves from 0Hz to 450KHz.
3. Sine waves can be used for test signals, drive signals, carrier frequency signals, etc.
4. A square wave can be used for switching signals, trigger signals, etc; the triangular wave is mainly used for scanning signals.
5.  Portable design, easy to operate.

Package Includes :

1 x ICL8038 12V to 15V Signal Generator 10Hz-450KHz Module

Oscilloscope Probe With DC Crocodile Alligator Clip Connector.

Features: 

1. lightweight
2. Easy to connect
3. 2 alligator clips connectors
4. 1 Digital Oscilloscope Probe
5. Color: Red & Black
6. Weight: 30

Packages Includes:

1 x Digital Oscilloscope Probe With DC Crocodile Alligator Clip Connector

This is an Acrylic case for XR2206 High Precision Function Signal Generator. High-quality material, best protection.

Note: Function Generator is not included in the package. 

Features:

1. High quality
2. Acrylic material looks transparent (after tearing down the film)
3. Easy for electronic enthusiasts to assemble
4. Specially designed for XR2206 High Precision Function Signal Generator

Package Includes:

1 x Acrylic Case For Signal Generator

SG-002 Analog 0-12V 4-20mA Signal Generator for PLC and Panel Debugging & Device Testing is designed to simulate 0-12V voltage signal and 0-24mA current signal for PLC and panel Debugging, Device Testing, Frequency Converter, Flow Valve, etc. Very easy to use, it can be connected with micro USB 5V power supply. What’s more, it can display 4 different types of digits, 0-12V voltage, 0-24mA current, 0-100 percent, and 0-50HZ. It plays an important role in your electronics work.

Features:

1. Power Supply: external micro USB-5V.
2. Voltage Output: 0-12V, precision is 0.01V, rotate the encoder knob to adjust the output voltage, can be calibrated.
3. Current Output: 0-22mA, precision is 0.01mA, rotate the encoder knob to adjust output current, can be calibrated.
4. Multiple Display: just push the small button to switch the display mode between voltage and current, you can also follow the instructions to switch 0-100 percent or 0-50HZ display.
5. Product Dimension: 3.94” x 2.36” x 0.98” (100mm x 60mm x 25mm), portable and convenient. Note: optional 803040 battery expansibility (battery not included).

Package Includes:

1 x SG-002 Analog 0-12V 4-20mA Signal Generator for PLC and Panel Debugging & Device Testing