SN65HVD251DR – 1Mbps High-Speed CAN Transceiver Short-Loop Delay IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x SN65HVD251DR – 1Mbps High-Speed CAN Transceiver Short-Loop Delay IC SMD-8 Package

The MCP4821T-E/MS is a 1-channel 12-bit buffered voltage output Digital-to-analog Converter (DAC) that operates from a single 2.7 to 5.5V supply with an SPI compatible serial peripheral interface. The device has a high precision internal voltage reference. The user can configure the full-scale range of the device to be 2.048 or 4.096V by setting the gain selection option bit. The device can be operated in active or shutdown mode by setting a configuration register bit or using the SHDN pin. In shutdown mode, most of the internal circuits, including the output amplifier, are turned OFF for power savings, while the amplifier output (VOUT) stage is configured to present a known high resistance output load. The device includes double-buffered registers, allowing a   synchronous update of the DAC output using the LDAC pin. The device utilizes resistive string architecture with its inherent advantages of low DNL error, low ratiometric temperature coefficient, and fast settling time.

Applications:

1.  SetPoint or Offset Trimming
2.  Sensor Calibration
3. Precision Selectable Voltage Reference
4.  Portable Instrumentation (Battery-Powered)
5.  Calibration of Optical Communication Devices

Features:

1.  Rail-to-Rail Output
2.  SPI Interface with 20 MHz Clock Support
3.  Simultaneous Latching of the DAC Output with LDAC Pin
4.  Fast Settling Time of 4.5 µs
5.  Selectable Unity or 2x Gain Output
6. 2.048V Internal Voltage Reference

Specifications:

1. Analogue Supply Voltage: 2.7 V to 5.5 V
2. Digital Supply Voltage: 2.7 V to 5.5 V
3. Product Category: Digital to Analog Converters – DAC
4. Resolution: 12 bit
5. Number of Channels: 2 Channel
6. Settling Time: 4.5 us
7. Output Type: Voltage Buffered
8. Interface Type: 3-Wire, Microwire, SPI
9. Minimum Operating Temperature: – 40 C
10. Maximum Operating Temperature: + 125 C

Package Includes:

1 x MCP4821T-E/MS 12 Bit Voltage Output Digital to Analog Converter (DAC) with SPI Interface IC DIP

MCP23017 16-Bit Input/Output Expander with I2C Interface IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x MCP23017 16-Bit Input/Output Expander with I2C Interface IC DIP-28 Package

MAX202EIM/TR RS-232 Interface IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x MAX202EIM/TR RS-232 Interface IC SMD-16 Package

The MA112 is a USB to UART Data Bridge controller. It includes a USB 2.0 full-speed function controller, USB transceiver, and 5V to 3.3V regulator. The UART function only supports the TXD and RDX on the RS-232 connection. Better than CH340. Operates without crystal.

Features:

1. Standard USB Virtual COM Port device
2. USB Full speed (12Mbps) operation and USB specification 2.0 compliant
3. Built-in USB transceiver
4. Integrated clock recovery, no external crystal required
5. USB suspend states reported via UPD/nUPD pins
6. Line Break detection and transmission
7. Support multi-processor communication

Useful Links:

Terminal-PC

Package Includes:

1 x Megawin MA112AS16  IC

ISL83485IBZ-T – 3.3V Half Duplex 10Mbps RS-485/RS-422 Transceiver IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x ISL83485IBZ-T – 3.3V Half Duplex 10Mbps RS-485/RS-422 Transceiver IC SMD-8 Package