SparkFun LiPo Fuel Gauge

SKU: 1073081
Out of stock

1,199.00

Add to Wishlist
Add to Wishlist
  1. Fuel gauge system for single-cell lithium-ion batteries
  2. Can be connected in a circuit to monitor the battery.
  3. Hardware and Software Reset.
Out of stock

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Description

LiPo batteries are a great way to power your projects. They’re small, lightweight, and pack a pretty good punch for their size. Unfortunately, even the best batteries eventually run low on power, and when they do it’s often unexpected (and at the worst time). Don’t be caught by surprise next time your board suddenly powers down! The SparkFun LiPo Fuel Gauge connects your battery to your project and uses a sophisticated algorithm to detect a relative state of charge and direct A/D measurement of battery voltage. In other words, it tells your microcontroller how much ‘fuel’ is left in the tank. The LiPo Fuel Gauge communicates with your project over I2C and an alert pin also tells you when the charge has dropped below a certain percentage.


Features:

  1. Fuel gauge system for single-cell lithium ion batteries
  2. Can be connected in circuit to monitor battery.
  3. Hardware and Software Reset.
  4. I2C Interface

Package Includes:

1 x SparkFun LiPo Fuel Gauge

Additional information

Input Voltage (V)

2.5~4.5

Maximum Clock Frequency (MHz)

0.4

Active Current(uA)

50~75

Sleep-Mode Current(uA)

1~3

Quick Comparison

SettingsSparkFun LiPo Fuel Gauge remove2 x 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266 removeHTRC-P10 Smart Battery Charger removeSKYRC PC1500 25A 12S/14S LiPo Battery Charger for Drone remove4 x 18650 Lithium Battery Shield V8 V9 for Arduino ESP32 ESP8266 with On-Off Button removeRefurbished – HTRC C240 DUO AC 100-240V DC 11-18 V LiPo LiFe / Li-ion/NiCd/NiMH/Pb Multi-Charger/Discharger remove
NameSparkFun LiPo Fuel Gauge remove2 x 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266 removeHTRC-P10 Smart Battery Charger removeSKYRC PC1500 25A 12S/14S LiPo Battery Charger for Drone remove4 x 18650 Lithium Battery Shield V8 V9 for Arduino ESP32 ESP8266 with On-Off Button removeRefurbished – HTRC C240 DUO AC 100-240V DC 11-18 V LiPo LiFe / Li-ion/NiCd/NiMH/Pb Multi-Charger/Discharger remove
Image
SKU107308110310241130364122001511506941510132
Rating
Price1,199.00527.002,999.0035,999.00919.00 5,299.00
Stock
Out of stock
In Stock
In Stock
In Stock
Out of stock
In Stock
AvailabilityOut of stockIn StockIn StockIn StockOut of stockIn Stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Read more

Add to cart

Description
  1. Fuel gauge system for single-cell lithium-ion batteries
  2. Can be connected in a circuit to monitor the battery.
  3. Hardware and Software Reset.
  1. Output port: USB or expansion port
  2. Output parameter 5V / 3A or 3.3V / 1A.
  3. Conversion efficiency up to 95%
  4. Input port: MICROUSB
  1. AC Input Voltage:100-240V 50/60Hz
  2. Output Voltage:12V/24V
  3. Output Current:12V10A&24V5A
  4. Output Volt under No Load:27.6V
  5. Minimum Start Volt: >9.0V
  6. Input Power with Load: MAX.120W
  7. Input Power under no Load:2.8W
  8. Dimension:158x90x50mm
  1. Intuitive Operation Interface
  2. LCD Display: for real-time charging data at a glance! During the charging process,
  3. High Performance with Dual Channels: With maximum charging power of 1500W.
  4. Compatibility of CAN: PC1500 charger is with built-industry CAN Bus communication. Smart batteries and lithium batteries with balance ports can be charged.
  5. Better Protection with Conformal Coating: Anti-corrosion paint is applied to protect the key circuit’s electronic components from extreme environments like moisture, mildew, and smoke corrosion. The charger’s reliability and stability are ensured for outdoor work.
  1. Buttons: 1. Voltage Switch, 2. ON-OFF
  2. Working Temperature: -20 °C~70 °C
  3. Output Port: USB or Expansion port
  4. Output Parameters: 5V/3A or 3V/1A
  5. Conversion Efficiency: up to 95% 
  1. Adjustable digital DC Power.
  2. Built-in smart cooling fan for easy heat dissipation.
  3. Built-In PFC AC adapter high efficiency. with the power switch.
  4. Multiple charging modes.Lipo/Lilo/LiFe/LiHv: balance charge, charge, fast charge,storage, discharge.
  5. NiMH/NiCd: Charge, Discharge, Cycle.
  6. PB: Charge, Discharge.
  7. Multi-extra function:
  8. Battery Meter:Display lithium battery cell counts, total voltage, battery capacity percentage,each cell’s voltage. (does not support 1s battery)
  9. TVC(Terminal voltage control): The Charger allows the user to set the charge/discharge end voltage.
  10. Lithium Battery internal Resistance Check: can display each cell’s resistance.(does not support 1s battery)
  11. Balancer: individual-cell-voltage balancing, cell voltage Monitoring
  12. Smart battery: Smart battery I, II, III,(Need optional DJI Charging cable)
  13. Data storage and loading

 

Content

LiPo batteries are a great way to power your projects. They’re small, lightweight, and pack a pretty good punch for their size. Unfortunately, even the best batteries eventually run low on power, and when they do it’s often unexpected (and at the worst time). Don’t be caught by surprise next time your board suddenly powers down! The SparkFun LiPo Fuel Gauge connects your battery to your project and uses a sophisticated algorithm to detect a relative state of charge and direct A/D measurement of battery voltage. In other words, it tells your microcontroller how much ‘fuel’ is left in the tank. The LiPo Fuel Gauge communicates with your project over I2C and an alert pin also tells you when the charge has dropped below a certain percentage.


Features:

  1. Fuel gauge system for single-cell lithium ion batteries
  2. Can be connected in circuit to monitor battery.
  3. Hardware and Software Reset.
  4. I2C Interface

Package Includes:

1 x SparkFun LiPo Fuel Gauge

This is a 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266. This mobile power supply has a built-in lithium battery protection IC, which has overcurrent, overvoltage, Undervoltage protection, and the module is a portable mobile power supply that supports 3V/1A and 5V/3A two voltage outputs.

Installation of the battery must be determined positive and negative, the board has been clearly marked positive and negative Or Installation errors will burn out the module. The battery voltage works normally from 3.2V to 4.2V. 5V voltage output rated current is 3A, maximum support 3.6A current (not recommended for overload, easy to damage the module, speed up the service life), the output of current depends on the quality of the 18650 battery.


Features:

  1. Supports 3V 1A voltage outputs.
  2. Supports 5V 3A voltage outputs.
  3. Micro USB charging current is 600mA-800mA.
  4. Supports up to two 18650 batteries. It is recommended to use two 18650 batteries, which can be longer.

Package Includes:

2 x 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266

HTRC-P10 Smart Battery Charger

  1. Lithium Batteries Mode
    For charging 12.6V or 25.2V Lithium batteries. When selected, the Lithium blue LED will
    illuminate. For use on batteries with Battery Management Systems (BMS) only.
  2. Lead-Acid Batteries Mode
    For AGM, GEL, SLA, WET, DEEP CYCLE, EFB, Calcium Batteries
  3. Motorcycle and LiFePO4 Batteries Mode
    An advanced battery recovery mode for repairing and storing, old, idle,
    damaged, stratified or sulfated.
    Not all batteries can be recovered, only can used on Motorcycle and Car batteries

Features: 

  1. High efficiency (>85%).
  2. Full microprocessor controlled.
  3. LCD display: voltage, current, temperature etc.
  4. Ease of use. Clear charging status display.
  5. Lithium, Lead-Acid, LiFePO4 battery types can be selectable
  6. The 7-stage microprocessor controlled charging process
  7. provides the best possible application and enables efficient battery charging.
  8. Charging voltage adapts to temperature, which can prevent over-or under-charging of the battery.
  9. Capable of recharging severely discharged or heavily sulfated battery.
  10. Do not over-charge your battery even it is kept connecting in any mode.
  11. Reverse polarity protection, short circuit protection, over-charge protection, parks free contact.

Specification:

  1. AC Input Voltage:100-240V 50/60Hz
  2. Output Voltage:12V/24V
  3. Output Current:12V10A&24V5A
  4. Output Volt under No Load:27.6V
  5. Minimum Start Volt: >9.0V
  6. Input Power with Load: MAX.120W
  7. Input Power under no Load:2.8W
  8. Dimension:158x90x50mm

Package Includes :

1 x HTRC-P10 Smart Battery Charger

This is a dual-channel 12S/14S LiPo charger for industrial application drones. It is reliable, safe, and easy to operate while with comprehensive functionality, like a battery voltage meter, internal resistance meter, LiHV charging mode, and also a time-saving synchronization mode.

This charger is capable of balance charging 2 packs of 12 cell batteries simultaneously. It is specifically designed for the big battery pack. PC1500 comes with

Better Protection with Conformal Coating Anti-corrosion paint is applied to protect the key circuit’s electronic components from extreme environments like moisture, mildew, and smoke corrosion. The charger’s reliability and stability are ensured for outdoor work.

Additionally, it has Multiple Protection functionality for Short Circuit Protection, Reverse Polarity Protection, Over-temperature Protection and Customers can rest assured of our quality safety and reliability


Features:

  1. Intuitive Operation Interface
    Routine charging is made easy by the simple and intuitive interface with the operation procedure simplified. Users only need to select Fast(Fast Charge)/Charge(Slow Charge)/Storage and press the Start button to get the job started.
  2. LCD Display
    Real-time charging data at a glance! During the charging process, the display screen displays charging time, battery power percentage, and every single cell’s voltage in real-time.
  3. High Performance with Dual Channels
    With high-power and dual channels, two batteries can be charged simultaneously in slow charging mode at a maximum charging power of 1500W.
  4. Compatibility of CAN
    PC1500 charger is with built-industry CAN Bus communication. Smart batteries and lithium batteries with balance ports can be charged.
  5. Better Protection with Conformal Coating
    Anti-corrosion paint is applied to protect the key circuit’s electronic components from extreme environments like moisture, mildew, and smoke corrosion. The charger’s reliability and stability are ensured for outdoor work.
  6. Multiple Protection:
    • Short Circuit Protection
    • Reverse Polarity Protection
    • Over-temperature Protection
    • Customers can rest assured of our quality safety and reliability

Specifications:

  1. Material: Plastic (Flame Retardant PC-ABS)
  2. Size: 294 x 136 x 212mm
  3. Weight: 4.2Kg
  4. Power Supply: AC Input 100-240V
  5. Charging Power: 1500W
  6. Battery Type: Lithium Battery
  7. LiPo Battery Cells: 12S/14S
  8. LiHV Battery Cells: 12S
  9. Fast Charge Current: 25A
  10. Slow Charge Current: 25A
  11. Discharge Power:60W
  12. Charging Mode:Fast charge, Slow, Storage
  13. Working Temperature: 0℃-40℃
  14. Working Humidity: 0%-75%
  15. Storage Temperature: -10℃-70℃
  16. Storage Humidity: 0%-75%

Package Includes:

1 x SKYRC PC1500 25A 12S/14S LiPo Battery Charger for Drone

.

This is a 4x 18650 Lithium Battery Shield V8 V9 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266. This mobile power supply has a built-in lithium battery protection IC, which has overcurrent, overvoltage, Under voltage protection, and the module is a portable mobile power supply that supports 3V/1A and 5V/3A two voltage outputs with an onboard voltage switching and ON-OFF button

Installation of the battery must be determined positive and negative, the board has been clearly marked positive and negative Or Installation errors will burn out the module. The battery voltage works normally from 3.2V to 4.2V. 5V voltage output rated current is 3A, maximum support 3.6A current, the output of current depends on the quality of the 18650 battery.

Note: This product comes from different brands. We will ship it randomly according to availability.


Features:

  1. Supports 3V 1A voltage outputs.
  2. Supports 5V 3A voltage outputs.
  3. Micro USB charging current is 600mA-800mA.
  4. Supports up to two 18650 batteries. It is recommended to use two 18650 batteries, which can be longer.

Package Includes:

1 x 4 x 18650 Lithium Battery Shield V8 V9 for Arduino ESP32 ESP8266

This is a Refurbished – HTRC C240 DUO AC 100-240V DC 11-18 V LiPo LiFe / Li-ion/NiCd/NiMH/Pb Multi-Charger/Discharger

Below is the link If you want a brand new https://robu.in/product/c240-duo-ac-100-240v-dc-11-18-v-lipo-life-li-ion-nicd-nimh-pb-multi-charger-discharger/

Condition: Product fully working condition with visible sign of box opened and used for testing purpose backed by robu warranty.

HTRC C240 DUO AC 150W /DC 240W Dual Channel 10A RC Balance Charger discharger for LiPo LiHV LiFe Lilon NiCd NiMh Pb battery

C240 is a new design dual balance charger by HTRC, which can charge two different kinds of batteries simultaneously.Multi-function,high power,Utilizing 2×16 LED display,built-in cooling fan,DC 11-18V or AC 100-240V dual power.Designed for charging LiPo LiFe Lilon LiHV NiCd NiMh Pb Smart Batteries.

It can support power distribution in AC mode, total power 150W (CH1+CH2=150Watt), and in DC mode, works in 2 * 120W. Max charge current can reach 10A each port in both AC and DC mode.

Features: 

  1. Full plastic shell, safe, compact, beautiful.
  2. Twin-channel, charge two different kinds of batteries simultaneously.
  3. High power, single port max 120W.support power distribution.
  4. Practical for a variety of batteries.LiPo LiFe Lilon NiCd NiMh Pb, and high power battery LiHV.
  5. Automatic identification of Li-Po batteries cells counts
  6. Adjustable digital DC Power.
  7. Built-in smart cooling fan for easy heat dissipation.
  8. Built-In PFC AC adapter high efficiency. with the power switch.
  9. Multiple charging modes.Lipo/Lilo/LiFe/LiHv: balance charge, charge, fast charge,storage, discharge.
  10. NiMH/NiCd: Charge, Discharge, Cycle.
  11. PB: Charge, Discharge.
  12. Multi-extra function:
  13. Battery Meter: Display lithium battery cell counts, total voltage, battery capacity percentage, each cell’s voltage. (does not support 1s battery)
  14. TVC(Terminal voltage control): The Charger allows the user to set the charge/discharge end voltage.
  15. Lithium Battery internal Resistance Check: can display each cell’s resistance.(does not support 1s battery)
  16. Balancer: individual-cell-voltage balancing, cell voltage Monitoring
  17. Smart battery: Smart battery I, II, III,(Need optional DJI Charging cable)
  18. Data storage and loading
  19. Re-peak and cycling of NiMH/NiCD battery.
  20. Maximum Safety: Automatic charge current limit, Delta-peak sensitivity, capacity limit, processing time limit, temperature threshold.
  21. Firmware update.

robu

Package Includes:

1x C240 Charger-(Original)
2x Charge cable banana plug to T-Plug
2x Extension charge cable T-Plug to XT60
2x balance board with pin cord
1x AC Cord (US EU UK AU optional)
1x DC Cord
1x User’s Manual

 

 

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Input Voltage (V)

2.5~4.5

Maximum Clock Frequency (MHz)

0.4

Active Current(uA)

50~75

Sleep-Mode Current(uA)

1~3

Output Voltage(V)

3V/5V

Output Port Type

USB or expansion port

Input Port

MICROUSB

Conversion efficiency(%)

95

Length (mm)

100

Width (mm)

50

Height (mm)

20

Weight (gm)

38

Output Voltage(V)

3V/5V

Output Port Type

USB or Expansion

Input Port

MicroUSB

Conversion Efficiency(%)

95 %

Length (mm)

100

Width (mm)

96

Height (mm)

20

Weight (gm)

65

Model No

HTRC C240 DUO

Input

AC 100-240V DC 11-18V

Charge power

:AC mode 150W (CH1+CH2=150Watt) DC mode 120W*2 =240W

Discharge power

Max 10W x 2

Charge current range

0.1-10A x 2

Discharge current range

0.1-2A*2

Lilon/LiPo/LiFe/LiHV cell count

1-6cells x 2

NiCd/NiMH battery cell count

1-15cells x 2

PB Battery voltage

2-20V x 2

Smart battery

I/II/III x 2

Current drain for balancing

500mA/cell

Net Weight(gm)

486 gm

Gross Weight

948 gm

Dimension

145 x 105 x 64 mm