-
Fast Shipping
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹2,264.83 (Including tax)
Discount per Bulk Quantity
Quantity | Discount | Price |
---|---|---|
5 - 10 | 5% | ₹2,151.58 (Including tax) |
11 - 20 | 8% | ₹2,083.64 (Including tax) |
21 - 40 | 10% | ₹2,038.36 (Including tax) |
41 - 100 | 12% | ₹1,993.05 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
Thermopiles are mainly used for contactless temperature or non-dispersive infrared measurement in many applications. Their function is to transfer the heat radiation emitted from the objects or other infrared sources into a voltage output.
1 x Thermopile Sensor, Infrared, TO-18, CO2 Gas Detection
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
Particle Measurement Range |
0.3~1.0μm; 1.0~2.5μm; 2.5~10μm |
---|---|
Particle Counting Efficiency |
50%@0.3μm ,98%@>=0.5μm |
Resolution of Particle Mass Concentration |
1μg/mᶟ |
Temperature Measurement Range |
0~99℃ |
Temperature Measurement Resolution |
0.1℃ |
Humidity Measurement Range |
0~99% |
Humidity Measurement Resolution |
0.1% |
Humidity Measurement Accuracy |
±2% |
Single Response Time |
<1s |
Comprehensive Response Time |
≤10s |
DC Supply Voltage |
Typ: 5V Min: 4.5V Max: 5.5V |
Working Current |
≤100mA |
Standby Current |
≤200mA |
Data Interface Level |
L<0.8V ,H>2.7V ,maximum level voltage 3.3V |
Working Temperature Range |
10~50℃ |
Working Humidity Range |
0~99% |
Storage Temperature Range |
40~80℃ |
Out of stock
Detection Gas |
Hydrogen (H2) |
---|---|
Detection range |
0~1000ppm |
Working Voltage |
3.3~5.5V DC |
Working Current |
<5mA |
Output Signal |
I2C ,UART (0~3V) ,analog voltage |
Working Temperature |
-20~50℃ |
Working Humidity |
15~90%RH (non-condensing) |
Storage Temperature |
-20~50℃ |
Communication Protocol |
I2C ,UART and analog |
Compatibility |
Arduino ,ESP32 ,Raspberry pi |
Storage Humidity |
15~90%RH (non-condensing) |
Lifespan |
>2 years (in the air) |
Adapter Plate Size |
37 x 32mm |
Out of stock
Out of stock
Gas Detection |
Carbon Dioxide (CO2) |
---|---|
Operating Voltage |
4.5 ~ 5.5V DC |
Average Current |
<85mA |
Output |
UART |
Measuring Range |
0 ~ 50000ppm |
Accuracy |
± (50ppm + 5% reading) |
Preheating Time |
3min |
Response Time |
T90 < 30s |
Operating Temperature |
0 ~ 50 ℃ |
Operating Humidity |
0 ~ 95% RH (no condensation) |
Service Life |
>5 years |
Out of stock
Heater voltage |
5.0±0.2V DC |
---|---|
Circuit Voltage |
5.0±0.2V DC |
Heater Current |
56±5mA |
Minimum impedance between Pin#2,3 and GND |
2.5MΩ |
Operating conditions |
0Ëš~40ËšC ,30~95%RH |
Temperature differential between inside and outside detector casing |
≤10˚C max. (see NOTE 1) |
Test gas conditions |
1250±100ppm iso-butane in air at 20˚±2˚C ,65±5%RH |
Circuit conditions |
VH=5.0±0.05V DC VC=5.0±0.05V DC |
Out of stock
Model No. |
TGS2602-B00 |
---|---|
Heater Voltage |
5.0±0.2V DC |
Circuit Voltage |
5.0±0.2V DC |
Heater power consumption |
280mW (typical) |
Heater Current |
56±5mA |
Sensing Principle |
MOS type |
Heater Resistance |
approx 59Ω at room temp. (typical) |
Load Resistance |
variable 0.45kΩ min |
Sensor Resistance |
10kΩ ~ 100kΩ in air |
Standard Package |
TO-5 metal can |
Target Gases |
Air contaminants (VOCs ,ammonia ,H2S ,etc.) |
Test Gas Conditions |
normal air at 20±2˚C ,65±5%RH |
Out of stock
Model No. |
TGS5042-A00 |
---|---|
Target Gases |
Carbon monoxide |
Typical detection range |
0 ~ 10 ,000ppm |
Output current in CO |
1.2~2.4nA/ppm |
Baseline offset(*1) |
<±10ppm equivalent |
Operating & storage temperature (*2,*3) |
-5ËšC ~ +55ËšC |
Operating humidity |
5 ~ 99%RH (no condensation) |
Response time (T90) |
within 60 seconds |
Standard test conditions |
20±2˚C ,40±10%RH |
Out of stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.