Description

3.5 inch HDMI Capacitive Touch IPS LCD Display (E), 640×480, Audio Jack. Supports Raspberry Pi OS / Ubuntu / Kali / WIN10 IoT / Retropie ,Driver free for USB-C touch Config file is required for I2C touch Supports all versions of Raspberry Pi.Use with raspberry pie Set the touch interface selector switch on the back of the screen to “I2C”. Fix the Raspberry Pi to the screen through the copper posts, and pay attention to aligning the position of the pogo pins. Connect the HDMI port.

Connect the HDMI connector to the screen and the HDMI port of the Raspberry Pi. To use the display with the Raspberry Pi, this LCD can support Raspberry Pi OS / Ubuntu / Kali and Retropie systems, you need to configure the resolution manually, otherwise it will cause a display exception. When the LCD works on the PC version of the Windows system, there is no such problem.

Feature:

1. 3.5inch IPS screen, hardware resolution is 640 × 480
2. 5-point capacitive touch, tempered glass panel, hardness up to 6H
3. When used with Raspberry Pi, supports Raspberry Pi OS / Ubuntu / Kali and Retropie
4. When used with Tinker Board 2, it supports Android / Debian
5. Ubuntu is supported when used with Jetson Nano
6. When used as a computer monitor, supports Windows 11/10/8.1/8/7
7. Onboard dual touch circuit, optional USB Type-C or I2C touch, more application scenarios
8. With 3.5mm audio and speaker interface, support HDMI audio output

Package Include:

1 X 3.5inch HDMI LCD

1 X HDMI Adapter

1 X HDMI Adapter

1 X HDMI cable

1 X USB-A to USB-C cable

1 X Screws pack