This is a Waveshare 4.3 Inch Capacitive Touch multicolor graphic LCD display, 4.3inch diagonal, 800×480 pixels. It is able to display 16,777,216 colors via the 24-bit RGB interface, supports up to 5-points capacitive touch control via an I2C interface.

Features:

1. 4.3-inch capacitive touch display, 800×480 resolution.
2. The capacitive touch panel on the I2C bus, 5-points touch control, with touch, interrupt.
3. 24-bit RGB display interface, 16,777,216 colors, fast refreshing.
4. Comes with development resources and a manual (examples for STM32F4 / STM32F7).

Package Includes:

1. 1 x 4.3inch Capacitive Touch LCD
2. 1 x 40-pin FFC (opposite side contact)
3. 1 x Screws pack (4pcs)

8DP-CAPLCD is a mini universal capacitive touch screen with HD resolution and is compatible with most standard HDMI devices.
As it is thin and light with toughened glass capacitive touch panel, 8DP-CAPLCD is excellent in display and has a smooth multi-touch effect.
The baseboard comes with fixed nuts, which enables users to integrate it into an all-in-one project more conveniently.

Features:

1. 8-inch IPS screen with a hardware resolution of 1280 x 800.
2. 10-point capacitive touch, with tempered glass panel, hardness up to 6H.
3. Adopting optical bonding touch technology, the display effect is better.
4. Supports Raspberry Pi OS / Ubuntu / Kali and Retropie when used with Raspberry Pi.
5. Supports Windows 11 / 10 / 8.1 / 8 / 7 when used as a computer monitor.
6. Support multi-language OSD menu (can be used for power control, adjusting brightness/contrast, etc.)
7. Support HDMI audio output, onboard 3.5mm headphone jack, and 4PIN speaker jack.

Specifications:

1. Model: 8DP-CAPLCD
2. Input Voltage 4.75- 5.25 V
3. Input Current 750 800 TBD
4. Viewing Angle: 178
5. Resolution: 1280 x 800
6. Touch screen dimensions: 194.00 (H) × 119.00 (V) × 2 (D)
7. Display dimensions: 114.66 (H) × 184.16 (V) × 2.6 (D)
8. Display area: 107.64 (H) × 172.22 (V)
9. Pixel pitch: 0.13455 (H) × 0.13455 (V)
10. Color gamut: 62%
11. Maximum brightness: 400
12. Contrast: 1200:1
13. Backlight adjustment: OSD menu dimming
14. Refresh Rate: 60 Hz
15. Display port: Standard HDMI port
16. Power port: 5V Type-C power supply
17. Power Consumption: 4

Package Includes:

1 x  Waveshare 8inch Capacitive Touch Display, Optical Bonding Toughened Glass Panel, 1280×800, IPS, HDMI Interface

As a universal 10.1inch HDMI display with a resolution of 1024 × 600 and a capacitive touch panel, it supports Raspberry Pi and can also be used as a computer monitor.

A capacitive touch screen is a control display that uses the conductive touch of a human finger or a specialized device for input.

Useful link:

To do the Hardware setup, please follow this tutorial.
To do the Software setup, please follow this tutorial.

Appearance and Dimensions

Features:

1. The hardware resolution is 1024 × 600
2. Capacitive touch control
3. When used with Raspberry Pi, it supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems
4. When used as a computer monitor, it supports Windows 11/10/8.1/8/7
5. Support common game consoles such as Microsoft XBOX360 and Nintendo switch
6. Supports multiple video input interfaces: HDMI, VGA and AV (CVBS)
7. Support multi-language OSD menu (can be used for power control, adjusting brightness/contrast, etc.)

Specifications:

1. Product: Capacitive Display
2. Brand:: Waveshare
3. Resolution: 1024 × 600
4. Display size: 10.1 inch
5. HDMI: 1024×600
6. Display port: HDMI / VGA / AV
7. Touch type: Capacitive
8. Device & System Support: Raspberry Pi, Jetson Nano, PC, Game Console

Packages Includes:

1 x 10.1inch Capacitive Touch LCD (D)

1 x HDMI LCD control board

1 x HDMI cable

1 x HDMI to Micro HDMI Adapter

1 x USB-A to Micro-B cable

1 x 40PIN FFC

1 x Back stand

1 x Case and screws

1 x OPTIONS Power adapter

1 x Quick start sheet

The gen4 5.0” Diablo16 Integrated Display Modules are part of the latest gen4 series of modules Designed and Manufactured by 4D Systems.

This hardware bundle includes the 4D Arduino Adaptor Shield II which allows fast and easy hardware interface to any Arduino board with the standard Arduino Headers and allows you to quickly and easily add a full colour HMI to your Arduino project.

The gen4 series was designed specifically for ease of integration and use, with careful consideration for space requirements and functionality.

These specific gen4 modules feature a 5.0” colour TFT LCD display, and come with options for Cover Lens Bezel (CLB), and resistive touch. They are powered by the well-known 4D Systems Diablo16 Graphics Processor, which offers an array of functionality and options for any Designer / Integrator / User.

The 5.0” Diablo16 Integrated Display Module features a TFT LCD Display, is capable of Touch Detection, microSD memory Storage, GPIO and Communications, along with multiple millisecond resolution timers, and Audio Generation.

The gen4 Series is 100% compatible with the Workshop4 IDE and its 4 different development environments, providing the User with a wealth of options for programming and controlling their system.

The gen4 series of Integrated Display Modules features a 30 pin ZIF socket, designed for a 30 pin FPC cable, for easy and simple connection to an application or mother board, or for connecting to accessory boards for a range of functionality advancements.

The gen4 series of modules has been designed to minimise the impact of display related circuitry, and provide a platform suitable for integration into a product. Application boards can sit flush on the back of the gen4 if required, as the display related electronics sit inside the plastic mounting base, leaving the application board surface clear for User circuitry.

Features:

1. Powerful 5.0” Intelligent LCD–TFT display module powered by DIABLO16.
   
2. 800 x 480 Resolution, RGB 65K true to life colours, TFT Screen with integrated 4–wire Resistive Touch Panel (DT) or Capacitive Touch Panel (DCT).
   
3. 6 banks of 32750 bytes of Flash memory for User Application Code and Data.
   
4. 32Kb of SRAM purely for the User.
   
5. 16 General Purpose I/O pins for user interfacing, which include 4 configurable Analog Inputs.
6. On-board latch type micro-SD memory card connector for multimedia storage and data logging purposes.
7. DOS compatible file access (FAT16 format) as well as low level access to card memory.
8. Dedicated PWM Audio pin driven by WAV files from micro-SD card, and for sound generation, for an external amplifier.
9. Display full colour images, animations, icons and video clips.
10. Supports all available Windows fonts.
11. 4.0V to 5.5V range operation (single supply)

Packages Includes:

1 x 4D System 5.0″ gen4 LCD pack for Arduino with case

7.9 inch Capacitive Touch Display For Raspberry Pi, 400×1280, IPS, DSI Interface. The display orientation is portrait by default, 400×1280 resolution (H×V). Change the software config for landscape display. 7.9 inch IPS screen, 400×1280 resolution, HDMI/USB interfaces. 5-point capacitive touch control, tempered glass panel, hardness up to 6H.Used with Raspberry Pi, supports Raspberry Pi OS / Ubuntu / Kali and Retropie, single touch and driver free. Using as a computer monitor, it supports Windows 11/ 10 / 8.1 / 8 / 7, five-point touch and driver free. HDMI audio input, 3.5 mm headphone/speaker jack.

Features :

1. 7.9inch IPS display with capacitive touch panel, hardware resolution is 400 x 1280.
2. Capacitive touch, supports up to 5-point touch.
3. Toughened glass capacitive touch panel, 6H hardness.
4. DSI interface, refresh rate up to 60Hz.
5. Working with Raspberry Pi, we provide the driver for Raspberry Pi OS.
6. Brightness is adjustable by software.
7. Support Pi 4B/3B+/3A+, CM3+/4 ,must be used with

Package Includes:

1  x  Waveshare 7.9inch Capacitive Touch Display for Raspberry Pi

The gen4–4DPi range are Primary Display’s for the Raspberry Pi A+, B+, Pi2, Pi3, Pi3 B+, Pi4, Pi Zero, Pi Zero W and Pi Zero 2 W, which display the primary output of the Raspberry Pi, like what is normally sent to the HDMI or Composite output. It features an integrated Resistive Touch panel or Capacitive Touch panel, enabling the gen4–4DPi to function with the Raspberry Pi without the need for a mouse. Communication between the gen4–4DPi and the Raspberry Pi is interfaced with a high speed 48 MHz SPI connection, which utilises an on–board processor for direct command interpretation and SPI communication compression, and features a customized  DMA enabled kernel. This combination allows this display to output high frame rate compared to other SPI display solutions, when displaying a typical image/video, and can achieve higher depending on if the image can be compressed. The gen4–4DPi is designed to work with the Raspberry Pi Operating System (previously named Raspbian OS) running on the Raspberry Pi, as that is the official Raspberry Pi operating system. It is also compatible with Pixel and Scratch. Please note that the display resolution of the 4.3” is 480×272 pixels, while the 5.0 and the 7.0” are 800×480 pixels, and thus may not display all menus in the desktop fully, without some down-scaling. The gen4–4DPi range connect to the Raspberry Pi’s 40 pin header using the gen4–4DPi Adaptor, which then connects to the gen4–4DPi display module using a 30– way FFC Cable.
Note*: Raspberry Pi is a trademark of the Raspberry Pi Foundation, and all references to the words ‘Raspberry Pi‘ or the use of its logo/marks are strictly in reference to the Raspberry Pi product, and how this product is compatible with but is not associated with the Raspberry Pi Foundation in any way.

Features:

1. Universal Primary Display for the Raspberry Pi.
   
2. Compatible with Raspberry Pi A+, B+, Pi2, Pi3, Pi3 B+, Pi4, Pi Zero, Pi Zero W and Pi Zero 2 W.
   
3. 480×272 Resolution (4.3”)
   
4. 800×480 Resolution (5.0” & 7.0”)
   
5. TFT Screen with integrated 4–wire Resistive Touch Panel (T), or Capacitive Touch Panel (CT) with Cover Lens Bezel (CLB)
   
6. Display GUI output / primary output, just like a monitor connected to the Raspberry Pi
   
7. High Speed 48MHz SPI connection to the Raspberry Pi, featuring SPI compression technology
   
8. Typical frame rate of 20 Frames per second (FPS) – 4.3”, or 7 Frames per second (5” & 7”), higher if image can be compressed further by the kernel. Lower if no compression is possible
   
9. Powered directly off the Raspberry Pi, no external power supply is required
   
10. On board EEPROM for board identification, following the HAT standard
    
11. 4x 4.0mm Mounting holes on Non–Touch and Resistive Touch modules, or via adhesive for Capacitive Touch model
    
12. RoHS and CE Compliant – note CE EMC has not been conducted on these modules

Packages Includes:

1 x 4D System 5.0″ gen4 Primary Display with Resistive Touch compatible with Raspberry Pi