- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Clear filters
- Arduino based Smart Blind Stick - Required Components
- Load / Pressure / Force / Flex Sensor
- Ni-Mh | Li-po | Li-Ion Battery chargers
Arduino Nano V3.0 (Without Cable)
In Stock
Add to Wishlist
Add to Wishlist
Arduino Starter Kit with Arduino UNO R3, Breadboard, LED, Resistor,Jumper Wires and Power Supply – build more than 10 DIY Projects
In Stock
Add to Wishlist
Add to Wishlist
- Charges batteries in pairs.
- Charge time 0.75 up to 4 hours.
- 240 minutes.
- Charging indicators.
- Bad cell detection.
Add to Wishlist
Add to Wishlist
- Supply Voltage:1.95V to 3.6V
- Digital Interface Supply Voltage:1.6V to 3.6V
- Pressure range:0,05~0.11 MPa
- Weight:2 gm
Add to Wishlist
Add to Wishlist
- Operating Voltage: 5V
- Operating Current : 80-100mA
- Power Cycling: above 500ms
- Dimension:55x48x11 mm
- Weight:12 gm
Add to Wishlist
Add to Wishlist
- Model: YZC-516C
- Capacity: 200 kg
- Cable Length: 3 m
- Weight:547 gm
Add to Wishlist
Add to Wishlist
- Model: YZC-516C
- Capacity: 100 kg
- Excitation Voltage:5-12 V
- Material: Alloy Steel
- Weight:609 gm
Add to Wishlist
Add to Wishlist
- Shell Dimensions: 100 mm
- Range: 5 kg
- Converter Module: HX711 A
- Cable Length: 18 cm
- Fitting ScrewHole Size: M3
- Rated output: 1.0 0.1mV / V
- Nonlinear: 0.05% F.S
Add to Wishlist
Add to Wishlist
- AC Input Voltage:100-240V 50/60Hz
- Output Voltage:12V/24V
- Output Current:12V10A&24V5A
- Output Volt under No Load:27.6V
- Minimum Start Volt: >9.0V
- Input Power with Load: MAX.120W
- Input Power under no Load:2.8W
- Dimension:158x90x50mm
Add to Wishlist
Add to Wishlist
- Resistance:120 Ω
- Strain Limit:2%
- Sensitivity Coefficient:2.10
Add to Wishlist
Add to Wishlist
Case Material: Plastic
Case Size:112x75x38mm
Weight:357.7g
Add to Wishlist
Add to Wishlist
- Supply Voltage 11-18V
- Compatible Lithium battery: 1-6Cells
- Lithium iron battery 1-6Cells
- NICD / NIMH 1-15Cells
- Maximum charge power 80W
Add to Wishlist
Add to Wishlist
- Force Measuring Range: 20 g to 5 kg
- 39.70 x 39.70mm active area
- Standard square format
- Connector housing (female, equivalent to Nicomatic 14106-12 and OF02)
Add to Wishlist
Add to Wishlist
- Conductivity range: 100 µS/cm to 200 mS/cm
- Cell constant4): typical 0.86 cm-1
- Nominal resistance: 1000 Ω at 0 °C
- Measurement frequency range: 100 Hz to 10 kHz
Add to Wishlist
Add to Wishlist
- Easily customizable to a wide range of sizes.
- Cost-effective.
- Ultra-thin; 0.45 mm.
- Robust; up to 10 million actuations.
- Simple and easy to Integrate.
Add to Wishlist
Add to Wishlist
- Compact, easy-to-use charger
- Suitable for 2S-4S LiPo cells and 6-8 NiMH cells.
- Connects directly to the wall outlet at a voltage range of 100 V to 240 V
- Suitable for LiPo and NiMH batteries
- Charge status indicator
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000