- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Model: Adafruit Assembled Data Logging shield
- SD card interface: FAT16 or FAT32
- Onboard regulator: 3.3 V
- Real time clock (RTC) keeps the time going even when the Arduino is unplugged
Add to Wishlist
Add to Wishlist
- Power Supply:5 V
- Output Current:800mA
- Dimension:60x56x20 mm
Add to Wishlist
Add to Wishlist
- Supply Voltage:1.95V to 3.6V
- Digital Interface Supply Voltage:1.6V to 3.6V
- Pressure range:0,05~0.11 MPa
- Weight:2 gm
Add to Wishlist
Add to Wishlist
- Operating Voltage: 5V
- Operating Current : 80-100mA
- Power Cycling: above 500ms
- Dimension:55x48x11 mm
- Weight:12 gm
Add to Wishlist
Add to Wishlist
- Model: YZC-516C
- Capacity: 200 kg
- Cable Length: 3 m
- Weight:547 gm
Add to Wishlist
Add to Wishlist
- Model: YZC-516C
- Capacity: 100 kg
- Excitation Voltage:5-12 V
- Material: Alloy Steel
- Weight:609 gm
Add to Wishlist
Add to Wishlist
- 168 dB maximum link budget.
- +20 dBm – 100 mW constant RF output vs.
- +14 dBm high-efficiency PA.
- Programmable bit rate up to 300 kbps.
- High sensitivity: down to -148 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- Excellent blocking immunity.
- Low RX current of 10.3 mA, 200 nA register retention.
- Fully integrated synthesizer with a resolution of 61 Hz.
- FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
- Built-in bit synchronizer for clock recovery.
- Preamble detection.
- 127 dB Dynamic Range RSSI.
Add to Wishlist
Add to Wishlist
- Shell Dimensions: 100 mm
- Range: 5 kg
- Converter Module: HX711 A
- Cable Length: 18 cm
- Fitting ScrewHole Size: M3
- Rated output: 1.0 0.1mV / V
- Nonlinear: 0.05% F.S
Add to Wishlist
Add to Wishlist
- Simple design, an adapter board combined use with Xbee products.
- Adapter the Xbee 20-pin to dual-row pins with 0.1-inch standard spacing (dual rows with 0.5-inch distance).
- Identifies the pin with the corresponding screen print.
- Free soldering to the board with female socket
Add to Wishlist
Add to Wishlist
- Resistance:120 Ω
- Strain Limit:2%
- Sensitivity Coefficient:2.10
Add to Wishlist
Add to Wishlist
- Force Measuring Range: 20 g to 5 kg
- 39.70 x 39.70mm active area
- Standard square format
- Connector housing (female, equivalent to Nicomatic 14106-12 and OF02)
Add to Wishlist
Add to Wishlist
- Conductivity range: 100 µS/cm to 200 mS/cm
- Cell constant4): typical 0.86 cm-1
- Nominal resistance: 1000 Ω at 0 °C
- Measurement frequency range: 100 Hz to 10 kHz
Add to Wishlist
Add to Wishlist
- Easily customizable to a wide range of sizes.
- Cost-effective.
- Ultra-thin; 0.45 mm.
- Robust; up to 10 million actuations.
- Simple and easy to Integrate.
Add to Wishlist
Add to Wishlist
- A silicone-gel covered pressure sensing gauge with a pre-calibrated and compensated 24 bit ADC
- Measure absolute pressure 0 to 25 PSI
- The port is made of stainless steel and is 3.7mm long and 2.5mm diameter
- 3.3V power regulation and level shifting
- Weight: 2g
Add to Wishlist
Add to Wishlist
- Working voltage: 3.2~3.4V
- Working current: <45mA
- Measurement range: -500~+500Pa
- Accuracy: ±3% Readings
Add to Wishlist
Add to Wishlist
- Flow step response time: (τ63) < 10ms
- Resolution: 24 bit
- Calibrated for: Air, N2
- Span accuracy: 2,3 3% of reading
- Zero point repeatability: 3 0.1 Pa
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000