- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Fuel gauge system for single-cell lithium-ion batteries
- Can be connected in a circuit to monitor the battery.
- Hardware and Software Reset.
Add to Wishlist
Add to Wishlist
- Good Quality material
- 96-230Vac operating input range
- 50,000 hours MTBF
- 6-month warranty.
- Input Current: 0.5A maximum
- Input Power consumption (no load): 0.075W maximum
- USB-C connection goes straight into your Raspberry Pi
Add to Wishlist
Add to Wishlist
- 1.5 Meter Cable lead
- Micro USB Connector
- Input: 90~264 V AC @47/63 Hz
- Output: 5.2V, 2.5A
- Interchangeable heads for different countries
- 50,000 hours MTBF
Add to Wishlist
Add to Wishlist
- Input Voltage: DC 6-60V
- Display Accuracy: 0.1V
- Control Accuracy: 0.1V
- Output Type: direct output
- Voltage Tolerance: ±0.1V
- Apply For:6-60V Lithium Lead-acid battery
Add to Wishlist
Add to Wishlist
- Power Supply Voltage:13.8-14.8V
- Relay Operating Voltage:12.4V
- Relay Disconnect Voltage:14.8V
- Voltage Tolerance:+/-0.1V
- Voltage Detection Way: DC voltmeter
Add to Wishlist
Add to Wishlist
- AC Input Voltage:100-240V 50/60Hz
- Output Voltage:12V/24V
- Output Current:12V10A&24V5A
- Output Volt under No Load:27.6V
- Minimum Start Volt: >9.0V
- Input Power with Load: MAX.120W
- Input Power under no Load:2.8W
- Dimension:158x90x50mm
Add to Wishlist
Add to Wishlist
- Output voltage: +8.0V DC
- Minimum load current: 0.01A
- Nominal load current: 6.0A
- Maximum power: 48.0W
- Load regulation: ±5%
- Line regulation: ±5%
Add to Wishlist
Add to Wishlist
Case Material: Plastic
Case Size:112x75x38mm
Weight:357.7g
Add to Wishlist
Add to Wishlist
- Fully compatible with High-Speed HDMI with Ethernet specification (Version 1.4).
- A superb cable with excellent audio-visual transfer properties that deliver signal without compromising purity and balance.
- Nickel-plated connectors for highest signal transfer rate and resistance in corrosion.
- A large gauge PVC jacket provides maximum shielding against wear and tear and extreme temperatures.
- Reinforced quad-layer braided shielding and Mylar-foil shielding provides utmost protection against RF and EM interference.
- Supports 480i, 480p, 720p, 1080i, 1080p, 1440p and 4K@60p resolution HDMI plug to HDMI plug leads
- Compatible with Raspberry Pi 4 Model B and all previous Raspberry Pi models
Add to Wishlist
Add to Wishlist
- Nickel Plated Connector Pins
- Fully triple shielded for increased noise immunity
- Length: 10cm
- 4Kp60 compliant
- 20Mohm 300VDC insulation withstands 300VDC for 0.1s
- Compatible with: Raspberry Pi Zero; Raspberry Pi Zero W; Raspberry Pi Zero W2
Add to Wishlist
Add to Wishlist
- Input:5V 2.1A
- Output:5V/1A or 5V/2.4A(Quick Charge )
- Size:66*18*16mm
- Protect Function: Overcharging; Overdischarging and overload protection
Add to Wishlist
Add to Wishlist
- Supply Voltage 11-18V
- Compatible Lithium battery: 1-6Cells
- Lithium iron battery 1-6Cells
- NICD / NIMH 1-15Cells
- Maximum charge power 80W
Add to Wishlist
Add to Wishlist
- Can be used for All development Board with C type port for 5V@3A supply
- Supports Reversible plug orientation
- Simple Plug and Play device, no driver software required.
- Supports High-speed data transfers
- Can be Use for Mobile and Tablets with Fast Charging support
- Compact and Light Weight
Add to Wishlist
Add to Wishlist
- Compact, easy-to-use charger
- Suitable for 2S-4S LiPo cells and 6-8 NiMH cells.
- Connects directly to the wall outlet at a voltage range of 100 V to 240 V
- Suitable for LiPo and NiMH batteries
- Charge status indicator
Add to Wishlist
Add to Wishlist
- Intuitive Operation Interface
- LCD Display: for real-time charging data at a glance! During the charging process,
- High Performance with Dual Channels: With maximum charging power of 1500W.
- Compatibility of CAN: PC1500 charger is with built-industry CAN Bus communication. Smart batteries and lithium batteries with balance ports can be charged.
- Better Protection with Conformal Coating: Anti-corrosion paint is applied to protect the key circuit’s electronic components from extreme environments like moisture, mildew, and smoke corrosion. The charger’s reliability and stability are ensured for outdoor work.
Add to Wishlist
Add to Wishlist
- Supports 6s LiPo battery Adjustable charge current from 1.0 to 20.0A
- The charger can store the charge current of the last charge program
- LED digits on indicate charge/discharge status
- Two working modes: balance charge mode and storage mode
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000