- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Good Quality material
- 96-230Vac operating input range
- 50,000 hours MTBF
- 6-month warranty.
- Input Current: 0.5A maximum
- Input Power consumption (no load): 0.075W maximum
- USB-C connection goes straight into your Raspberry Pi
Add to Wishlist
Add to Wishlist
- 1.5 Meter Cable lead
- Micro USB Connector
- Input: 90~264 V AC @47/63 Hz
- Output: 5.2V, 2.5A
- Interchangeable heads for different countries
- 50,000 hours MTBF
Add to Wishlist
Add to Wishlist
- Output voltage: +8.0V DC
- Minimum load current: 0.01A
- Nominal load current: 6.0A
- Maximum power: 48.0W
- Load regulation: ±5%
- Line regulation: ±5%
Add to Wishlist
Add to Wishlist
- Fully compatible with High-Speed HDMI with Ethernet specification (Version 1.4).
- A superb cable with excellent audio-visual transfer properties that deliver signal without compromising purity and balance.
- Nickel-plated connectors for highest signal transfer rate and resistance in corrosion.
- A large gauge PVC jacket provides maximum shielding against wear and tear and extreme temperatures.
- Reinforced quad-layer braided shielding and Mylar-foil shielding provides utmost protection against RF and EM interference.
- Supports 480i, 480p, 720p, 1080i, 1080p, 1440p and 4K@60p resolution HDMI plug to HDMI plug leads
- Compatible with Raspberry Pi 4 Model B and all previous Raspberry Pi models
Add to Wishlist
Add to Wishlist
- Nickel Plated Connector Pins
- Fully triple shielded for increased noise immunity
- Length: 10cm
- 4Kp60 compliant
- 20Mohm 300VDC insulation withstands 300VDC for 0.1s
- Compatible with: Raspberry Pi Zero; Raspberry Pi Zero W; Raspberry Pi Zero W2
Add to Wishlist
Add to Wishlist
- Can be used for All development Board with C type port for 5V@3A supply
- Supports Reversible plug orientation
- Simple Plug and Play device, no driver software required.
- Supports High-speed data transfers
- Can be Use for Mobile and Tablets with Fast Charging support
- Compact and Light Weight
Add to Wishlist
Add to Wishlist
- Product: 3D Printer
- Brand: Creality
- Model: Ender-3 S1 Pro
- Output Voltage: 24V
- 32 Bit silence motherboard
- Build Volume: 220 x 220 x 270 mm
- Machine Dimension: 490 x 455 x 625 mm
- Item Net Weight: 8.6Kg
Add to Wishlist
Add to Wishlist
- Product: Washing & Curing Machine
- Model: UW-02
- Brand: Creality
- Interactive interface
- Power: 60W
- Curing size: 200 x 300mm
- Weight: 8kg
Add to Wishlist
Add to Wishlist
- Product: 3D Printer
- Brand: Creality
- Model: CR-200B
- Output Voltage: 24V
- Operating system: Windows 10
- Printing size: 200 x 200 x 200 mm
- Machine Dimension: 411 x 435 x 503 mm
- Item Weight: 16 Kg
Add to Wishlist
Add to Wishlist
- Safe and Intelligent
- Simple Operation
- Auto-focusing
- Smoke Purification
Add to Wishlist
Add to Wishlist
- Variants: Standard
- Powered autofocus.
- Sensor: SONY IMX708
- Resolution: 12 Megapixel
- Viewing Angle: 76º
- Improved low-light sensitivity.
- Compatible with all models of Raspberry Pi*
Add to Wishlist
Add to Wishlist
- Variants: NoIR
- Powered Autofocus
- Sensor: SONY IMX708
- Resolution: 12 Megapixel
- Viewing Angle: 76º
- Improved low-light sensitivity
Add to Wishlist
Add to Wishlist
- Variants: NoIR-Wide
- Powered autofocus.
- Sensor: SONY IMX708
- Resolution: 12 Megapixel
- Viewing Angle: 120º
- Improved low-light sensitivity.
Add to Wishlist
Add to Wishlist
- Variants: Standard-Wide
- Powered autofocus.
- Sensor: SONY IMX708
- Resolution: 12 Megapixel
- Viewing Angle: 120º
- Improved low-light sensitivity.
- Compatible with all models of Raspberry Pi*
Add to Wishlist
Add to Wishlist
- Variant: M12 Mount
- Sensor: Sony IMX477R stacked, back-illuminated sensor
- Resolution: 12.3 megapixels
- Sensor size: 7.9mm sensor diagonal
- Pixel size: 1.55μm × 1.55μm
- Output: RAW12/10/8, COMP8
Add to Wishlist
Add to Wishlist
- Dual ARM Cortex-M0+ @ 133MHz
- 264kB on-chip SRAM in six independent banks
- Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
- DMA controller
- Fully-connected AHB crossbar
- Interpolator and integer divider peripherals
- On-chip programmable LDO to generate the core voltage
- 2 on-chip PLLs to generate USB and core clocks
- 30 GPIO pins, 4 of which can be used as analog inputs
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000