- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Operating voltage: 3.3V / 5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 42mm × 27mm
- Display size: 21.76mm × 14mm
- Dot pitch: 0.175 × 0.17
- Resolution: 128 × 80
- Display color: black, white
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI control interface, for working with host boards such as Raspberry Pi/Jetson Nano/Arduino.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Dot pitch: 0.181 × 0.181
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Display color: ACep 7-Color
- Interface: 3-wire SPI, 4-wire SPI
- Crey scale: 2
- Display size: 86.40 × 54.00mm
- Dot pitch: 0.135 × 0.135mm
- Resolution: 640 × 400 pixels
- Advanced Color ePaper (ACeP) technology, supports a 7-Color display
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Add to Wishlist
Add to Wishlist
- Power: NFC-powered
- Resolution: 400×300
- Dot pitch: 0x212x 0x212
- Refresh time: 4s
- No backlight required, e-Paper keep displaying the last content for a long time without power
- No power adapter required
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V
- Gray Scale: 2
- Interface: 3-wire SPI, 4-wire
- SPI Partial Refresh Time: 0.3s
- Full Refresh Time: 2s
- Refresh Power: 26.4mW(Typ.)
- Dot Pitch : 0.194 x0.194mm
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- Operating temperature 0~40℃
- Storage temperature -25~60℃
- Humidity range 40~70%RH
- Display resolution 152(H) x 152(V) pixel
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- On-chip display RA
- DPI 111
- Interface UART
- Baud rate with Arduino 230400
Add to Wishlist
Add to Wishlist
- Output Voltage: 12.6 VDC
- Balance connector: JST
- Discharge connector: Nylon Female T Connector
- High energy density
- Inbuilt (BMS) battery protection circuit
Add to Wishlist
Add to Wishlist
- Charge connector: DC 5.5mm Female connector
- Discharge connector: Nylon Female T Connector
- Maximum Output Voltage: 12.6 VDC
- High energy density
- Good consistency and low self-discharge.
- Long life with full capacity for up to 500 charge cycles
- Inbuilt (BMS) battery protection circuit
Add to Wishlist
Add to Wishlist
- Output Voltage: 12.6 VDC
- Discharge connector: Nylon Female T Connector
- Long life with full capacity for up to 500 charge cycles
- Inbuilt (BMS) battery protection circuit
- Dimensions: 7 x 6 x 3mm
- Weight: 200g
Add to Wishlist
Add to Wishlist
- Charge connector: DC 5.5mm Female connector
- Discharge connector: Nylon Female T Connector
- Maximum Output Voltage: 12.6 VDC
- High energy density
- Good consistency and low self-discharge.
- Long life with full capacity for up to 500 charge cycles
- Inbuilt (BMS) battery protection circuit
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V
- Interface: 3-wire SPI, 4-wire SPI
- Display size: 84.8mm × 63.6mm
- Dot pitch: 0.212 × 0.212
- Resolution: 400 × 300
Add to Wishlist
Add to Wishlist
- Power: NFC-powered
- Resolution: 200×200
- Dot pitch: 0.138 × 0.138
- Refresh time: 8s (Transmit time is not included)
- Display color: black, white, red
- Viewing angle: >170°
Add to Wishlist
Add to Wishlist
- Nominal Capacity (mAh): 2200
- Charging Connector: JST-XH connector
- Discharging Connector: Nylon Female T Connector
- Nominal Voltage (v): 11.1
- Max Charging Voltage (v): 12.6
- Inbuilt (BMS) battery protection circuit
Add to Wishlist
Add to Wishlist
- Maximum Output Voltage: 12.6 VDC
- Connector: DC Jack Male & Female
- High energy density
- Good consistency and low self-discharge.
- Long life with full capacity for up to 500 charge cycles
- Inbuilt (BMS) battery protection circuit
Add to Wishlist
Add to Wishlist
This battery pack is made of best quality tested ICR 18650 2000mAh 20C Lithium-Ion Batteries and BMS circuit. It is very small in size and weight compared to Ni-Cd, Ni-MH, and Lead Acid Batteries. With the inbuilt Charge protection circuit, the battery pack can be directly charged with the DC power Adapter, so need not use the specialized battery chargers and worry about overcharging.
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000