- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
Add to Wishlist
Add to Wishlist
- Operating voltage range:1.71V to 3.6V
- Power consumption @ 1.8V:0.55 mA (High) ,0.26 mA(Low)
- Smart FIFO up to 9 Kilobyte based on features set
- Embedded temperature sensor:16 bit
Add to Wishlist
Add to Wishlist
- LSM303D 6DoF Motion Sensor
- ±2/±4/±8/±12 gauss magnetic scale
- ±2/±4/±6/±8/±16 g linear acceleration
- 16-bit data output
- 3.3V or 5V compatible
- I2C interface, with address select via ADDR cuttable trace (0x1D or 0x1E)
- Reverse polarity protection
Add to Wishlist
Add to Wishlist
- Non-contact measurement, high safety
- Multiple ranges for various measurement scenarios
- Compatible with 3V3/5V micro-controller
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V-5.5V
- Low Power Consumption
- High Accuracy
- I2C Communication
- Small Size
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V~5V
- Operating Current: 8~10uA
- Interface: Gravity-I2C
- I2C Address: 0x19 (default) / 0x18 (optional)
- User-selectable Scale: ±2g/±4g/±8g/±16g
- Operating Temperature: -40℃~+85℃
Add to Wishlist
Add to Wishlist
- Working Voltage: 3.3~5V
- Communication: Digital
- Connector: Gravity
Add to Wishlist
Add to Wishlist
- power supply: DC 7-30 V
- Input Voltage: 0-10V
- Output current: 4-20mA
Add to Wishlist
Add to Wishlist
- 3-axis gravity accelerometer and 3-axis gyroscope
- On-chip temperature sensor
- Communication protocol I2C:0x68
- Accelerometer noise 100 μg/√Hz
- Gyroscope sensitivity error 1%
- Gyroscope noise ±4 mdps/√H
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V
- Current Consumption: 140uA (sleep mode)/ 520uA (Accelerometer mode only)/ 4.27mA (Gyro mode only)/ 4.9mA (accelerometer and gyro mode)
- Initial Sensitivity: accelerometer ±1%; gyro ±1%
- Non-linear Sensitivity: accelerometer ±0.5%, gyro ±0.1%
- Interface: I2C/SPI(7MHz)
- Selectable Scale: ±2g/±4g/±8g/±16g
- Gyroscope Range: ±125/±250/±500dps
Add to Wishlist
Add to Wishlist
- 1.62V to 3.6V supply voltage,
- Supply Voltage −0.3 to 3.6 V
- Mechanical Shock 10,000 g
- User selectable data output rate
- I2C Interface
- One interrupt pin
Add to Wishlist
Add to Wishlist
- input current (RMS): 5A.
- Max current: 15A.
- Work temperature:-25℃~+70℃.
- Storage temperature:-30℃~+90℃.
- Work voltage:660V.
- Frequency range:50Hz-1KHz.
- Dielectric strength:3.5KV 50Hz 1min
Add to Wishlist
Add to Wishlist
- Closed-loop current transducer using the Hall effect technology
- Primary nominal current of 25A
- 0.5% accuracy
- The primary current measuring range is ±36A
- The supply voltage is ±15V
- The conversion ratio is 1-2-3-4-5: 1000
- Secondary nominal RMS current is 25mA
Add to Wishlist
Add to Wishlist
- Conductivity range: 100 µS/cm to 200 mS/cm
- Cell constant4): typical 0.86 cm-1
- Nominal resistance: 1000 Ω at 0 °C
- Measurement frequency range: 100 Hz to 10 kHz
Add to Wishlist
Add to Wishlist
- Power Supply: 3.3V.
- Temperature Range: -40~85°C.
- Digital Interface: I2C/SPI.
- Programmable Interrupt.
- Resolution: 0.3μT.
Add to Wishlist
Add to Wishlist
- Supply Voltage: 3.3V to 5V.
- Indicator LED on board.
- Interface: Digital.
- Easily precognitive interfaces of sensors (“A” for analog and “D” for digital).
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000