- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Charges batteries in pairs.
- Charge time 0.75 up to 4 hours.
- 240 minutes.
- Charging indicators.
- Bad cell detection.
Add to Wishlist
Add to Wishlist
- Non-contact measurement, high safety
- Multiple ranges for various measurement scenarios
- Compatible with 3V3/5V micro-controller
Add to Wishlist
Add to Wishlist
- power supply: DC 7-30 V
- Input Voltage: 0-10V
- Output current: 4-20mA
Add to Wishlist
Add to Wishlist
- AC Input Voltage:100-240V 50/60Hz
- Output Voltage:12V/24V
- Output Current:12V10A&24V5A
- Output Volt under No Load:27.6V
- Minimum Start Volt: >9.0V
- Input Power with Load: MAX.120W
- Input Power under no Load:2.8W
- Dimension:158x90x50mm
Add to Wishlist
Add to Wishlist
Case Material: Plastic
Case Size:112x75x38mm
Weight:357.7g
Add to Wishlist
Add to Wishlist
- input current (RMS): 5A.
- Max current: 15A.
- Work temperature:-25℃~+70℃.
- Storage temperature:-30℃~+90℃.
- Work voltage:660V.
- Frequency range:50Hz-1KHz.
- Dielectric strength:3.5KV 50Hz 1min
Add to Wishlist
Add to Wishlist
- Supply Voltage 11-18V
- Compatible Lithium battery: 1-6Cells
- Lithium iron battery 1-6Cells
- NICD / NIMH 1-15Cells
- Maximum charge power 80W
Add to Wishlist
Add to Wishlist
- Closed-loop current transducer using the Hall effect technology
- Primary nominal current of 25A
- 0.5% accuracy
- The primary current measuring range is ±36A
- The supply voltage is ±15V
- The conversion ratio is 1-2-3-4-5: 1000
- Secondary nominal RMS current is 25mA
Add to Wishlist
Add to Wishlist
- Conductivity range: 100 µS/cm to 200 mS/cm
- Cell constant4): typical 0.86 cm-1
- Nominal resistance: 1000 Ω at 0 °C
- Measurement frequency range: 100 Hz to 10 kHz
Add to Wishlist
Add to Wishlist
- Compact, easy-to-use charger
- Suitable for 2S-4S LiPo cells and 6-8 NiMH cells.
- Connects directly to the wall outlet at a voltage range of 100 V to 240 V
- Suitable for LiPo and NiMH batteries
- Charge status indicator
Add to Wishlist
Add to Wishlist
- Intuitive Operation Interface
- LCD Display: for real-time charging data at a glance! During the charging process,
- High Performance with Dual Channels: With maximum charging power of 1500W.
- Compatibility of CAN: PC1500 charger is with built-industry CAN Bus communication. Smart batteries and lithium batteries with balance ports can be charged.
- Better Protection with Conformal Coating: Anti-corrosion paint is applied to protect the key circuit’s electronic components from extreme environments like moisture, mildew, and smoke corrosion. The charger’s reliability and stability are ensured for outdoor work.
Add to Wishlist
Add to Wishlist
- Supports 6s LiPo battery Adjustable charge current from 1.0 to 20.0A
- The charger can store the charge current of the last charge program
- LED digits on indicate charge/discharge status
- Two working modes: balance charge mode and storage mode
Add to Wishlist
Add to Wishlist
- Input Current :100A
- Power supply: 15V DC
- Output Type: Voltage
- Output voltage: 4V
- Whole Diameter: 20mm
- Dimensions (L x W x H): 40 x 16 x 60
Add to Wishlist
Add to Wishlist
- Input: Bare conductor
- output 20A: 20mA
- Whole Diameter: 10
- Dimensions (L x W x H) mm: 23 x 25 x 40
Add to Wishlist
Add to Wishlist
- Model: G700-54.60-10
- Input: 170Vac – 300Vac
- Output: 54.6V
- Current: 10A
- Connector: XT60 Connector
Add to Wishlist
Add to Wishlist
- Model: G500-54.60-06
- Input: 170Vac – 300Vac
- Output: 54.6V
- Current: 6A
- Connector: XT60 Connector
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000