- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Lastest ESP32 Version: REV1
- Connectivity: WIFI & Bluetooth
- Memory: 4MB Flash4MB PSRAM
- Lithium battery interface, 500mA Max charging current
- Onboard TF CARD Slot
- Default firmware: Latest Micropython firmware
Add to Wishlist
Add to Wishlist
- ESP32 VCC range:2.2-3.6 V
- VBAT: direct to battery
- VCC: output of regulator 3.3V/600mA up to 250 mA during RF transmissions
- WiFi And Bluetooth Module
Add to Wishlist
Add to Wishlist
- Power Supply: 3.3V~5.5 V
- Communication: I2C, UART
- Wireless Mode: IEEE802.11b/g/n
- Encryption Type: WPA WPA2/WPA2–PSK
- WiFi Frequency: 2.4GHz
Add to Wishlist
Add to Wishlist
- Power Supply:5-80 V
- Switching Voltage (VAC):250@10A
- Switching Voltage (VDC):30@10A
Add to Wishlist
Add to Wishlist
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
Add to Wishlist
Add to Wishlist
- Compatible with 3.3v or 5v I/O Arduino Board.
- Frequency Band: 433 MHZ (Pre-configure in factory)
- Low power consumption
- Compatible with Arduino Leonardo, Uno, Mega2560, DUE
- External Antenna via SMA Jack
Add to Wishlist
Add to Wishlist
- 168 dB maximum link budget.
- +20 dBm – 100 mW constant RF output vs.
- +14 dBm high-efficiency PA.
- Programmable bit rate up to 300 kbps.
- High sensitivity: down to -148 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- Excellent blocking immunity.
- Low RX current of 10.3 mA, 200 nA register retention.
- Fully integrated synthesizer with a resolution of 61 Hz.
- FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
- Built-in bit synchronizer for clock recovery.
- Preamble detection.
- 127 dB Dynamic Range RSSI.
Add to Wishlist
Add to Wishlist
- Supply voltage 3.7V – 5V
- Mini and compact size
- Output power +20.8 dBm at 3.3V
- Sensitivity-116.5 dBm ~ -136 dBm
- ModulationLoRa, (G)FSK, (G)MSK, BPSK
Add to Wishlist
Add to Wishlist
- Communication distance: 15KM
- Sensitivity: down to -148dBm
- Programmable bit rates: up to 300kbps
- RSSI dynamic range: 127dB
- Wireless frequency: 433MHz
- Working voltage: 1.8-3.7v
- Working temperature: -40-+80 ℃
Add to Wishlist
Add to Wishlist
- Model No.:E32-900T30D
- Port Number:1
- Interface Type: CDMA
- Working Frequency Range:862 to 915 MHz
- Operating Distance Range (Meter):8000
Add to Wishlist
Add to Wishlist
- Input Voltage DC 5V – 3A
- Processor Raspberry Pi 4 (Broadcom BCM2711, Quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz)
- RAM: 4GB
- Storage: 64GB MicroSD Card
- Wi-Fi 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless
- Bluetooth 5.0, BLE
- LoRaWAN Supports Class A, C
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V
- Modulation: LoRa/(G)FSK
- Emit power: > 14dBm@3.3V
- RF chip: SX1262
Add to Wishlist
Add to Wishlist
- Model: ESP32-CAM-MB
- Color: Black
- Chipset: CH340G
- Connectivity Technology: USB
Add to Wishlist
Add to Wishlist
- Mini wi-fi device.
- Operating voltage: 5V.
- Serial Wi-Fi Adapter Module.
- Dimensions : 6x5x1.
- Color: Blue
Add to Wishlist
Add to Wishlist
- Smart cities.
- Retail store sensors.
- Asset tracking.
- Max. Operating Voltage: 3.7.
- RF output: +22dBm.
- Programmable bit rate: 300kbps(FSK)/62.5K(LORA).
- Excellent blocking immunity.
- Low RX current: 8mA.
Add to Wishlist
Add to Wishlist
- min Supply voltage: 1.8.
- Max. Operating voltage: 3.7
- Min. Operational temperature range -20
- Max. Operational temperature: +70
- Max. RF Input Level:+10 d
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000