- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Operating voltage: 3.3V / 5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 42mm × 27mm
- Display size: 21.76mm × 14mm
- Dot pitch: 0.175 × 0.17
- Resolution: 128 × 80
- Display color: black, white
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI control interface, for working with host boards such as Raspberry Pi/Jetson Nano/Arduino.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Dot pitch: 0.181 × 0.181
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Display color: ACep 7-Color
- Interface: 3-wire SPI, 4-wire SPI
- Crey scale: 2
- Display size: 86.40 × 54.00mm
- Dot pitch: 0.135 × 0.135mm
- Resolution: 640 × 400 pixels
- Advanced Color ePaper (ACeP) technology, supports a 7-Color display
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Add to Wishlist
Add to Wishlist
- Power: NFC-powered
- Resolution: 400×300
- Dot pitch: 0x212x 0x212
- Refresh time: 4s
- No backlight required, e-Paper keep displaying the last content for a long time without power
- No power adapter required
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V
- Gray Scale: 2
- Interface: 3-wire SPI, 4-wire
- SPI Partial Refresh Time: 0.3s
- Full Refresh Time: 2s
- Refresh Power: 26.4mW(Typ.)
- Dot Pitch : 0.194 x0.194mm
Add to Wishlist
Add to Wishlist
- Output: Continuous 40A, Burst 60A up to 10 Secs.
- Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
- BEC: 3A / 5V (Switch mode).
- Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: Brushless Motor)
Add to Wishlist
Add to Wishlist
- Output: Continuous 60A, Burst 80A up to 10 Secs.
- Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
- BEC: Pentium-60A: 3A / 5V (Switch mode).
- Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: Brushless Motor)
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- Operating temperature 0~40℃
- Storage temperature -25~60℃
- Humidity range 40~70%RH
- Display resolution 152(H) x 152(V) pixel
Add to Wishlist
Add to Wishlist
- Support High Voltage (HV) Receivers
- Input voltage: 3.7V-27V
- Max current: 30A
- 18AWG silicone cable
- JST Plug
- Cable length 20cm
- Weight: 11g – With LED indicator lamp
Add to Wishlist
Add to Wishlist
- Continuous Current: 40A
- Burst Current: 55A (10 Sec.)
- BEC Mode: Linear Mode, 5V@3A
- Programmable: Yes
- Battery cell : Li-PO / NiMH
Add to Wishlist
Add to Wishlist
1 Output: Continuous 80A, Burst 100A up to 10 seconds.
2 Input Voltage: 2-6S Lipo, 5-18 cells NiMH.
3 BEC: 5A / 5V Switch mode BEC.
4 Refresh rate of the throttle signal: 50Hz to 432Hz.
5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)
Add to Wishlist
Add to Wishlist
- Output: Continuous 50A
- Burst 65A up to 10 seconds.
- Input Voltage: 2-4S Lipo, 5-12 cells N
- BEC: 5A / 5V Switch mode BEC.
- The refresh the rate of the throttle signal: 50Hz to 432
Add to Wishlist
Add to Wishlist
- Output: Continuous 20A.
- Burst 25A up to 10 seconds.
- Input Voltage: 2-3S Lipo, 5-9 cells NiMH.
- BEC: 2A / 5V Linear mode BEC.
- Refresh rate of the throttle signal: 50Hz to 432Hz.
- Size: 42mm x 25mm x 8mm.
- Weight: 19g.
Add to Wishlist
Add to Wishlist
- Output: Continuous 20A, Burst 25A up to 10 seconds.
- Input Voltage: 2-3S Lipo, 5-9 cells NiMH.
- BEC: 2A / 5V Linear mode BEC.
- Refresh rate of the throttle signal: 50Hz to 432Hz.
- Size: 42mm x 25mm x 8mm.
- Weight: 19g.
Add to Wishlist
Add to Wishlist
- Model: Wp-1060-BRUSHED
- Voltage Range: 2-3S Lipo or 5-9 NiMH
- Resistance: Fwd 0.001Ω, Rev 0.002Ω
- BEC Output: 3A/5V (Linear Mode)
- PWM Frequency: 1KHz
Add to Wishlist
Add to Wishlist
- Input Voltage: 2-3S Lipo/5-9 Cell NiMH
- Cont./Peak Current: 80A/400A
- Power Rating Upto 80 Amps
- Battery Connector Type XT-60
- BEC Output: Switch Mode: 6V/7.4V@3A
- Battery Compatibility LiPo/NiMh
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000