- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Working voltage: DC1.8-7V(low consumption version),7-24V(regular version), 7-24V(PLC version)
- Rated voltage: 7 to 24 V
- Pulse output duty cycle: 50+-10%
- Insulation resistance: 100M Ohm and above
- Input/Output Diameter: 9.5mm
Add to Wishlist
Add to Wishlist
- Working voltage: 4.5 ~ 5.5 V DC
- Average current: < 85 mA
- Interface level: 3.3 V
- Measurement range: 0 to 5% VOL range
- Output signal: 0.4~2 V DC, UART, PWM
- Warm-up time: 3 min
- The Sensor has High sensitivity, high resolution, low power consumption.
- It Provides UART, analog voltage signal, PWM waveform, and other output methods.
Add to Wishlist
Add to Wishlist
- Standard Encapsulation: Metal cap
- Sensor Type: Flat surfaced
- Target Gas: CH4, Nature gas
- Heater Voltage:5V AC or DC
- Lower consumption
- Small size
- Fast response and resume
- Highest sensitivity
Add to Wishlist
Add to Wishlist
- Model: MP-5
- Sensor Type: Flat surfaced semiconductor sensor
- Standard Encapsulation: Metal cap
- Target Gas: LPG
- Lower consumption
- Small size
- Fast response and resume
- Highest sensitivity
Add to Wishlist
Add to Wishlist
- Model No: ZE03
- Target Gas: CO, SO2, NH3, H2S, O2
- Measurement Range: C0: 0~1000 ppm, SO2: 0~20 ppm, NH3: 0~100 ppm.
- Working Voltage DC:3.7V~9V
- Working Current:< 5 mA
- Output Data: UART Output (3V electrical level)
Add to Wishlist
Add to Wishlist
- Measurement Range :0~20ppm
- Max detecting concentration: 150ppm
- Sensitivity:(0.55±0.15)µA/ppm
- Resolution ratio :0.1ppm
- Response time(T90): <30S
- Detection gas: SO2 sensor, sulfur-dioxide gas sensor
Add to Wishlist
Add to Wishlist
- Used to measure or detect Alcohol
- Can be used as a digital or analog sensor
- Long life and low cost
- Simple drive circuit
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V / 5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 42mm × 27mm
- Display size: 21.76mm × 14mm
- Dot pitch: 0.175 × 0.17
- Resolution: 128 × 80
- Display color: black, white
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI control interface, for working with host boards such as Raspberry Pi/Jetson Nano/Arduino.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Dot pitch: 0.181 × 0.181
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Display color: ACep 7-Color
- Interface: 3-wire SPI, 4-wire SPI
- Crey scale: 2
- Display size: 86.40 × 54.00mm
- Dot pitch: 0.135 × 0.135mm
- Resolution: 640 × 400 pixels
- Advanced Color ePaper (ACeP) technology, supports a 7-Color display
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Add to Wishlist
Add to Wishlist
- Power: NFC-powered
- Resolution: 400×300
- Dot pitch: 0x212x 0x212
- Refresh time: 4s
- No backlight required, e-Paper keep displaying the last content for a long time without power
- No power adapter required
Add to Wishlist
Add to Wishlist
- Sensor:SGP40
- Communication Bus: I2C
- Response Time:< 10s
- Measurement Range:0~1000 ppm of ethanol equivalents
- Operating Voltage:3.3V/5V
- Digital I2C output, less interference
- Onboard voltage translator, compatible with 3.3V/5V operating voltage
Add to Wishlist
Add to Wishlist
- Power:2.5V ~ 5.0V
- Detecting Range: 10ppm-300ppm NH3 ,10ppm-1000ppm Benzene,10ppm-300ppm Alcohol
- Relative humidity:<95%RH
- Dimension: 40.0mm * 21.0mm
Add to Wishlist
Add to Wishlist
- Power:2.5V ~ 5.0V
- Detecting Range: 200-10000ppm
- Relative humidity:<95%RH
- Dimension: 40 x 21 x 17 mm
Add to Wishlist
Add to Wishlist
- Power:2.5V ~ 5.0V
- Detecting Range:20ppm-2000ppm carbon monoxide
- Relative humidity:<95%RH
- Dimension:40x20x17 mm
Add to Wishlist
Add to Wishlist
- Detection of Gas: oxygen
- Operating Voltage: 3.3 to 5.5V DC
- Output Signal: I2C output
- Measurement Range: 0~25%Vol
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000