- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x62 mm
- Weight:8 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x700 mm
- Weight:3 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x62 mm
- Weight:7 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x150 mm
- Weight:11 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x150 mm
- Weight:10 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x150 mm
- Weight:13 gm
Add to Wishlist
Add to Wishlist
- Working voltage: 4.5V to 5.5 V
- Transmit tube pressure drop: Vf = 1.6 V
- Transmit tube current: 20 mA
- Distinguish precision: 0.01 mm
- Measurement frequency, 100 kHz
Add to Wishlist
Add to Wishlist
- Designed for 915mhz but works fine on 868mhz too
- Weight: 0.9g
- ~40mm stem
- ~55mm wide top segment (not RF elements)
- Works great with the TBS Crossfire Nano Rx
Note: This is not an original TBS product, but a high-quality clone of one.
Add to Wishlist
Add to Wishlist
- Specially designed for VTX/RX for long range FPV
- Omnidirectional (compatible with video TX/RX)
- Directional Diagram: all-around( Omnibearing)
- Polarization:Circular polarization Right-handed(RHCP)
- Greatly increases video and audio signal.
Add to Wishlist
Add to Wishlist
- Encoder Type: Optical
- IP54 (IEC Standard) Protection
- High-Quality 2-Meter Cable
- Anti-jamming performance
- Small size, lightweight
- Stainless Steel Shaft
- Line interface with waterproof protection
Add to Wishlist
Add to Wishlist
- Power: 3.3V ~ 5V
- Dimension: 26.8mm × 15mm × 18.7mm
- Mounting holes size: 3mm
- Gap width: 6mm
Add to Wishlist
Add to Wishlist
- Supply voltage: from 3.0 V to 5.3 V
- It detects the clockwise and counterclockwise rotation
- The number of steps in 360°: 20 steps
- Button in the knob
- Pulses per lap: 15 pluses
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V~5V
- Total Rotating Angle: 360°
- Pulses Per Revolution: 20
- Interface: two Gravity connectors; I2C
- Cascadable Device Number: 4
Add to Wishlist
Add to Wishlist
- Model: ROTG01 (UVC OTG FPV Receiver)
- Connector Type: SMA Female (Antenna)
- Current consumption: 200 mA
- Length of Antenna: 11 cm
- No. of Channels: 150
Add to Wishlist
Add to Wishlist
- Type: Optical Sensor
- Interface: GPIO
- Compatibility: mikroBUS
- Click board: (28.6 x 25.4 mm)
- Input Voltage: 3.3V or 5V
Add to Wishlist
Add to Wishlist
- Product: Triple Feed Patch 5.8GHz Antenna SMA
- Center frequency: 5.8 GHz
- Bandwidth: 660 MHz (5.47 – 6.13 GHz)
- Matching: S11 < -20 dB, VSWR < 1.22 (at center frequency)
- Axial ratio: < 1.3
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000