Shop
Chipsee PPC-CM4-70 compatible Industrial embedded Raspberry Pi 7 Inch PC with Case for Compute Module 4
Out of stock
Waveshare 15.6inch Capacitive Touch Screen LCD (H) with Case 1920×1080 HDMI IPS Various Systems Support (Without Power Adapter)
Out of stock
| Size |
15.6" |
|---|---|
| Resolution |
1920×1080 |
| Display Port |
HDMI (with HDCP) / VGA |
| Display Panel |
IPS |
| Viewing Angle |
178° |
| Touch Type |
Capacitive |
| Touch Points |
10-Points |
| Touch Port |
USB |
| Touch Panel |
Toughened Glass |
| OSD Menu |
Brightness/Contrast |
| Sound |
Hi-Fi Speaker |
| Audio Output |
3.5mm Jack |
| Gaming - |
Xbox360/PS4/Switch |
| Enclosure |
Polycarbonate |
| Certification |
CE |
T Motor Navigator MN601-S KV320 – 2PCS/SET
Out of stock
DFRobot LattePanda V1 – A Powerful Windows 10 Mini PC 4GB/64GB (Unactivated)
Out of stock
DFRobot Gravity H2 Sensor (Calibrated) – I2C, UART and analog
Out of stock
| Detection Gas |
Hydrogen (H2) |
|---|---|
| Detection range |
0~1000ppm |
| Working Voltage |
3.3～5.5V DC |
| Working Current |
＜5mA |
| Output Signal |
I2C ,UART (0~3V) ,analog voltage |
| Working Temperature |
-20～50℃ |
| Working Humidity |
15～90%RH (non-condensing) |
| Storage Temperature |
-20～50℃ |
| Communication Protocol |
I2C ,UART and analog |
| Compatibility |
Arduino ,ESP32 ,Raspberry pi |
| Storage Humidity |
15～90%RH (non-condensing) |
| Lifespan |
>2 years (in the air) |
| Adapter Plate Size |
37 x 32mm |
Creality Ender 3 V2 with Orange PLA+ 1.75mm 3D Printing Filament 1kg-White
Out of stock
| Modeling Technology |
FDM |
|---|---|
| Recommended Power Supply |
Input:AC 115/230 V ,Output: DC 24 V |
| Maximum Power (W) |
270 |
| Operating System |
MAC/WindowsXP/7/8/10 |
| Software |
Simplify3d/Cura |
| Filament Diameter (mm) |
1.75 |
| Print Precision(mm) |
±0.1 |
| Hotbed Temperature(°C) |
≤100 |
| Printing Size(mm) |
220x220x250 |
| Length (mm) |
620 |
| Width (mm) |
475 |
| Height (mm) |
470 |
| Weight (gm) |
7800 |
Ender 3 NEO
Out of stock
| Molding Technology |
FDM |
|---|---|
| Input Voltage (V) |
100-120V- ,200-240V- ,50/6OHz |
| Rated Power (W) |
350 |
| Printing Speed |
120mm/s |
| MCU |
32 bit main silent Board |
| File Format |
STL/OBJ/AMF |
| Supports Software |
creality slicer/cura/simplfy3d |
| Heat Bed Temperature |
100°C |
| Nozzle Temperature |
260°C |
| Resume Printing |
Yes |
| Extruder |
Bowden Extruder |
| Display |
12864 Mono knob Dispaly |
T Motor Antigravity MN7005 KV115
Out of stock
Creality Ender 3 V2 3D Printer
Out of stock
| Modeling Technology |
FDM |
|---|---|
| Recommended Power Supply |
Input:AC 115/230 V ,Output: DC 24 V |
| Maximum Power (W) |
270 |
| Operating System |
MAC/WindowsXP/7/8/10 |
| Software |
Simplify3d/Cura |
| Filament Diameter (mm) |
1.75 |
| Print Precision(mm) |
±0.1 |
| Hotbed Temperature(°C) |
≤100 |
| Printing Size(mm) |
220x220x250 |
| Length (mm) |
620 |
| Width (mm) |
475 |
| Height (mm) |
470 |
| Weight (gm) |
7800 |
DFRobot Gravity HCL Sensor (Calibrated) – I2C & UART
Out of stock
EDATEC CM4NANO baseboard withCM4108008 WIFI antenna, metal case 8GB RAM and 8GB EMMC
Out of stock
| Model |
ED-CM4NANO10-0408-C |
|---|---|
| Power supply |
12~18V DC voltage range input 5.5/2.5mm DC Jack or Phoenix terminal connector optional |
| Camera and display |
1 x CSI interface ,support Raspberry Pi official 5M & 8M pixel camera module 1 x HDMI port 1 x DSI interface ,support Raspberry Pi official display |
| Wired interface |
1 x Support PoE power supply 10/100M/1000 Ethernet (requires official PoE HAT) 2 x USB3.0 (external) 1 x USB3.0 (built-in) 1 x USB2.0 |
| Wireless communication |
1 x 2.4G/5.8G WiFi compatible with IEEE 802.11 b/g/n/ac standard 1 x Bluetooth 5.0 BLE WiFi/BLE external antenna and PCB antenna are optional |
| Storage |
1 x microSD card holder (used to expand user data storage) Extensible interface: 1 x Raspberry Pi standard 40-pin connector 1 x Raspberry Pi standard 4-pin POE connector |
| Operating temperature |
-25~60°C |
| Software Environment |
Raspberry Pi Raspbian OS installed |
| Dimension (L x W x H) mm |
103 x 62 x 21.5 |
| Others |
1 x RTC with a backup battery 1 x Red LED power indicator ,1 x Green LED status indication 1 x system reset button 1 x buzzer |
EDATEC ED-CM4SEN baseboard with WIFI Antenna 4G Module Metal Case 1GB RAM and 8GB EMMC
Out of stock
| Industrial interface |
4 x RS485 1 x RS232 1 x CAN 1 x RTC with a backup battery 1 x Red LED power indicator ,1 x Green LED status indication 1 x buzzer |
|---|---|
| Display |
1 x Standard HDMI port 1 x HDMI by FPC cable 1 x DSI interface+1 x 5V@1.5A output ,support Raspberry Pi official display |
| Wired interface |
1 x 10/100M/1000 Ethernet 2 x USB2.0 (external) 1 x Micro USB2.0 (Inside the case ,for programming) |
| Wireless communication |
1 x 4G/LTE module 1 x 2.4G/5.8G WiFi compatible with IEEE 802.11 b/g/n/ac standard 1 x Bluetooth 5.0 BLE Official Raspberry Pi WiFi/BLE external antenna |
| Storage |
1 x microSD card holder (used to expand user data storage) |
| Expansion interface |
1 x Mini PCI-e socket for PCIe Gen2 x1 |
| Power supply |
12~18V DC voltage range input 5.5/2.5mm DC Jack or Phoenix terminal connector optional |
| Operating temperature: |
-25~60°C |
| Dimension (L x W x H) |
103 x 73 x 32 |
| Software Environment |
Raspberry Pi Raspbian OS installed Support removing software upgrade |