-
Fast Shipping
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹2,449.39 (Including tax)
Discount per Bulk Quantity
Quantity | Discount | Price |
---|---|---|
5 - 10 | 5% | ₹2,326.92 (Including tax) |
11 - 20 | 8% | ₹2,253.43 (Including tax) |
21 - 40 | 10% | ₹2,204.46 (Including tax) |
41 - 100 | 12% | ₹2,155.46 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
Ozone sensors design for monitoring ground-level ozone; known to irritate the nose and lungs
Sensitive material of MQ131 gas sensor is semiconductor metallic oxide, which with high conductivity in clean air. When the ozone gas exists, the sensor’s conductivity gets lower along with the gas concentration rising. Users can convert the change of conductivity to correspond output signal of gas concentration through a simple circuit. MQ131 ozone gas sensor has high sensitivity to ozone, and also has sensitivity to strong oxide such as Cl2, NO2 &etc. It responses oppositely to organic interference gases.
Our ozone sensors and monitoring systems are widely used across a range of applications, from industrial hygiene to virus disinfection and the sterilization of commercial and residential buildings.
Note: For More info check User Manual Â
1 x Winsen MQ131 High Concentration Ozone Gas Sensor
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
Detection Gas |
Hydrogen (H2) |
---|---|
Detection range |
0~1000ppm |
Working Voltage |
3.3~5.5V DC |
Working Current |
<5mA |
Output Signal |
I2C ,UART (0~3V) ,analog voltage |
Working Temperature |
-20~50℃ |
Working Humidity |
15~90%RH (non-condensing) |
Storage Temperature |
-20~50℃ |
Communication Protocol |
I2C ,UART and analog |
Compatibility |
Arduino ,ESP32 ,Raspberry pi |
Storage Humidity |
15~90%RH (non-condensing) |
Lifespan |
>2 years (in the air) |
Adapter Plate Size |
37 x 32mm |
Out of stock
Out of stock
Out of stock
Out of stock
Heater voltage |
5.0±0.2V DC |
---|---|
Circuit Voltage |
5.0±0.2V DC |
Heater Current |
56±5mA |
Minimum impedance between Pin#2,3 and GND |
2.5MΩ |
Operating conditions |
0Ëš~40ËšC ,30~95%RH |
Temperature differential between inside and outside detector casing |
≤10˚C max. (see NOTE 1) |
Test gas conditions |
1250±100ppm iso-butane in air at 20˚±2˚C ,65±5%RH |
Circuit conditions |
VH=5.0±0.05V DC VC=5.0±0.05V DC |
Out of stock
Product Name |
Figaro TGS 2600 Air Quality Sensor |
---|---|
Input Voltage (V) |
5.0±0.2V AC/DC |
Load Resistance |
variable 0.45kΩ min. |
Heater Resistance (Ω) |
approx 83Ω at room temp. (typical) |
Heater current (mA) |
42±4mA |
Heater power consumption (mW) |
210 |
Sensor Resistance (kΩ) |
10kΩ ~ 90kΩ in air |
Sensitivity (change ratio of Rs) |
0.3~0.6 Rs (10ppm of H2)/ Rs air |
Out of stock
Model No. |
TGS2611-C00 |
---|---|
Sensing Principle |
MOS type |
Standard Package |
TO-5 metal can |
Target Gases |
Methane ,Natural Gas |
Heater Voltage |
5.0±0.2V DC |
Circuit Voltage |
5.0±0.2V DC |
Load Resistance |
variable 0.45kΩ min. |
Heater Resistance |
approx 59Ω at room temp. |
Heater Current |
56±5mA |
Heater power consumption |
280mW±25mW |
Sensor Resistance |
0.68~6.8kΩ in 5000ppm methane |
Test Gas Conditions |
Methane in air at 20±2˚C ,65±5%RH |
Out of stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.