-
Fast ShippingGet the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹1,491.35 (Including tax)
Discount per Bulk Quantity
| Quantity | Discount | Price |
|---|---|---|
| 5 - 10 | 5% | ₹1,416.78 (Including tax) |
| 11 - 20 | 8% | ₹1,372.04 (Including tax) |
| 21 - 40 | 10% | ₹1,342.21 (Including tax) |
| 41 - 100 | 12% | ₹1,312.39 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
The Nano Every is Arduino’s 5V compatible board in the smallest available form factor: 45x18mm!
The Arduino Nano is the preferred board for many projects requiring a small and easy to use microcontroller board. The small footprint and low price, make the Nano Every particularly suited for wearable inventions, low-cost robotics, electronic musical instruments, and general use to control smaller parts of a larger projects.
The Arduino Nano Every is an evolution of the traditional Arduino Nano board but features a lot more powerful processor, the ATMega4809. This will allow you to make larger programs than with the Arduino Uno (it has 50% more program memory), and with a lot more variables (the RAM is 200% bigger).
Each set of headers allows you to stack a Qwiic Nano shield on top of your Arduino Nano or plug them into a solderless breadboard. Note: Soldering is required for functionality and physical attachment to a shield or board
1 x ARDUINO NANO EVERY WITH HEADERS
| Microcontroller |
ATMage4809 |
|---|---|
| Operating Voltage(V) |
5V |
| VIN MIN-MAX |
7-21V |
| DC Current per I/O Pin (mA) |
20 |
| DC Current for 3.3V Pin (mA) |
50 |
| Clock Speed |
20 MHz |
| CPU Flash Memory |
48KB |
| SRAM |
6KB |
| EEPROM |
256byte (ATMega4809) |
| PWM PINS |
5 (D3 ,D5 ,D6 ,D9 ,D10) |
| UART |
1 |
| SPI |
1 |
| 12C |
1 |
| Analog I/O Pins |
Input Pins 8 (ADC 10 bit) ,Out put Only through PWM (no DAC) |
| EXTERNAL INTERRUPTS |
all digital pins |
| On Board LEDs |
13 |
| USB |
Uses the ATSAMD11D14A |
| Length (mm) |
45 mm |
| Width (mm) |
18 mm |
| Height (mm) |
2 |
| Weight (g) |
5 gr (with headers) |
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
| Model Type |
Leonardo |
|---|---|
| Microcontroller Chip |
ATmega32u4 |
| Operating Voltage (VDC) |
5 |
| Input Voltage(Recommended) |
7V to 12V |
| Input Voltage (limit) |
6V-20V |
| Analog I/O Pins |
12 |
| Digital I/O Pins |
20 |
| PWM Digital I/O Pins |
7 |
| Clock Speed |
16 MHz |
| Flash Memory |
32 KB (ATmega32u4) of which 4 KB used by bootloader |
| SRAM |
2.5 KB (ATmega32u4) |
| EEPROM |
1 KB (ATmega328) |
| Weight (gm) |
20 |
| Length (mm) |
68.6 |
| Width (mm) |
53.3 |
Out of stock
| Microcontroller Chip |
SAMD21 Cortex®-M0+ 32bit low power ARM MCU |
|---|---|
| Operating Voltage (VDC) |
3.3 |
| Input Voltage(Recommended) |
5 V |
| Analog I/O Pins |
Input Pins:7 ,Output Pins:1 |
| Digital I/O Pins |
8 |
| PWM Digital I/O Pins |
13 |
| Clock Speed |
32.768 kHz (RTC) ,48 MHz |
| Flash Memory |
256 KB (internal) |
| SRAM |
32 KB |
| DC Current per I/O Pin (mA) |
7 |
| Dimensions in mm (LxWxH) |
83x25x2 |
| Weight (gm) |
43 |
Out of stock
| Microcontroller Chip |
SAMD21 Cortex-M0+ 32bit low power ARM MCU |
|---|---|
| Operating Voltage (VDC) |
3.3 |
| Input Voltage(Recommended) |
5 V |
| Analog I/O Pins |
Input Pins:7 ,Output Pins:1 |
| Digital I/O Pins |
22 |
| PWM Digital I/O Pins |
12 |
| Clock Speed |
48MHz |
| Flash Memory |
256 KB |
| SRAM |
32 KB |
| DC Current for 3.3V Pin (mA) |
600 |
| Dimensions in mm (LxWxH) |
61.5x25x4 |
Out of stock
| Model Type |
Arduino MKR1000 WIFI |
|---|---|
| Microcontroller Chip |
SAMD21 Cortex-M0+ 32bit low power ARM MCU |
| Operating Voltage (VDC) |
5V |
| Analog I/O Pins |
(Input Pin )7 (ADC 8/10/12 bit) ,(Output Pins) 1 (DAC 10 bit) |
| Digital I/O Pins |
8 pins |
| PWM Digital I/O Pins |
12 (0 ,1 ,2 ,3 ,4 ,5 ,6 ,7 ,8 ,10 ,A3 – or 18 – ,A4 -or 19) |
| Clock Speed |
32.768 kHz (RTC) ,48 MHz |
| Flash Memory |
256 KB (internal) |
| SRAM |
32 KB |
| EEPROM |
NO |
| LED_BUILTIN |
6 |
| DC CURRENT PER I/O PIN |
7mA |
| EXTERNAL INTERRUPTS |
8 (0 ,1 ,4 ,5 ,6 ,7 ,8 ,A1 -or 16- ,A2 – or 17) |
| SUPPORTED BATTERY |
Li-Po single cell ,3.7V ,700mAh minimum |
| UART |
1 |
| SPI |
1 |
| 12C |
1 |
| Length(cm) |
6 |
| Width (cm) |
2.5 |
| Hight (mm) |
.5 |
| Weight (gm) |
0.007 |
Out of stock
| Microcontroller |
64 MHz Arm® Cortex M4 (nRF52832) |
|---|---|
| Sensors |
& humidity sensor with AI ,BHI260AP – Self-learning AI smart sensor with ,BME688 – Digital low power gas ,pressure ,temperature ,Digital pressure sensor ,BMM150 – Geomagnetic sensor ,integrated accelerometer and gyroscope ,BMP390 – |
| I/O Ports |
(with ext. ESLOV connector) ,1x serial port ,1x SPI ,2x ADC ,programmable I/O voltage from 1.8-3.3V ,Castellated pins with the following features: 1x I2C bus |
| Connectivity |
Bluetooth® 4.2 |
| Operating Power |
Micro USB (USB-B) ,Pin Header ,3.7V Li-po battery with Integrated battery charger |
| Memory |
2MB QSPI dedicated for BHI260AP ,512KB Flash / 64KB RAM ,2MB SPI Flash for storage |
| Interface |
USB interface with debug functionality |
| Dimensions (mm) LxWxH |
22 ,86 mm x 22 ,86 mm |
| Weight (g) |
2 g |
Out of stock
| Microcontroller |
core up to 480 Mhz + M4 core up to 240 Mhz ,STMicroelectronics STM32H747AII6 Dual ARM® Cortex® – M7 |
|---|---|
| Sensors |
2 MP Color Camera ,6-Axis IMU (LSM6DSOX) ,Distance ,Time Of Flight sensor (VL53L1CBV0FY/1) ,Microphone (MP34DT05) |
| I/O Ports |
(with ESLOV connector) ,1x serial port; 1x SPI; ,2x ADC Programmable I/O voltage from 1.8-3.3V ,Castellated pins with the following features: 1x I2C bus ,JTAG ,Power and GPIO pin headers |
| Security |
NXP® SE050C2 Crypto chip |
| Operating Power |
High speed USB (500mbps); Pin Header; 3.7V Li-po battery ,with Integrated battery charger and fuel gauge (MAX17262REWL) |
| Connectivity |
(Murata® 1DX – LBEE5KL1DX-883) ,Wi-Fi / Bluetooth® Low Energy 4.2 |
| Memory |
2MB Flash / 1MB RAM; 16MB QSPI Flash for storage |
| Interface |
USB interface with debug functionality |
| Operating Temperature (°C) |
-20° C to +70° C (-4° F to 158°F) |
| Dimensions (mm) LxWxH |
22.86 mm x 22.86 mm |
Out of stock
Out of stock
| Model Type |
Uno Rev3 SMD |
|---|---|
| Microcontroller Chip |
ATmega328P |
| Operating Voltage (VDC) |
5 |
| Input Voltage(Recommended) |
7 to 12 V |
| Input Voltage (limit) |
6-20V |
| Analog I/O Pins |
6 |
| Digital I/O Pins |
14 (of which 6 provide PWM output) |
| PWM Digital I/O Pins |
6 |
| Clock Speed |
16 MHz |
| Flash Memory |
32 KB (ATmega32u4) of which 4 KB used by bootloader |
| SRAM |
2 KB (ATmega328P) |
| EEPROM |
1 KB (ATmega328P) |
| Weight (gm) |
25 |
| Length (mm) |
68.6 |
| Width (mm) |
53.4 |
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.