Development Board/Kit
Black ESP32-DEVKITC Development Board Backboard
Out of stock
CANBed – Arduino CAN-BUS Development Kit
Out of stock
DC7-28/5V 30A ESP8266 WIFI 4 Channel Relay Module ESP-12F Development Board
Out of stock
DFRobot Beetle ESP32 – C3 (RISC-V Core Development Board)
Out of stock
DFRobot Beetle RP2040 Mini Development Board
Out of stock
DFRobot FireBeetle 2 ESP32-E IoT Microcontroller (Supports Wi-Fi & Bluetooth)
Out of stock
DFRobot FireBeetle Covers-LoRa Radio 433MHz
Out of stock
DFRobot FireBeetle ESP32 IoT Microcontroller (Supports Wi-Fi & Bluetooth)
Out of stock
| Processer |
Tensilica LX6 dual-core processer |
|---|---|
| Input Voltage (V) |
3.3 to 5 |
| Maximum Working Voltage (V) |
3.3 |
| Charge Current(A) |
0.5 |
| Dischage Current Range (A) |
0.6 |
| Wi-Fi protocol |
802.11 b/g/n/d/e/I/k/r |
| SRAM |
520kB |
| Flash Memory |
16MB |
| Digital I/O Pins |
10 |
| Frequency Range |
2.4~2.5GHz |
| Working Temperature Range (°C) |
-40 to 85 |
| Length (mm) |
58 |
| Width (mm) |
29 |
| Height (mm) |
7.5 |
DFRobot FireBeetle ESP32-E IoT Microcontroller with Header (Supports Wi-Fi & Bluetooth)
Out of stock
| Operating Voltage(V) |
3.3V. |
|---|---|
| Input Voltage (V) |
3.3V~5.5V. |
| Support Low-Power |
2mA |
| Max Discharge Current |
600mA@3.3V LDO |
| Max Charge Current |
500mA |
| Main Frequency |
240MHz |
| SRAM |
520KB |
| Flash |
4MB |
| Frequency Range |
2.4~2.5 GHz |
| Operating Current (A) |
80mA（Average） |
| Operating Temperature (°C) |
-40℃~+85℃ |
| Module Size |
25.4×60mm/1×2.36 |
DFRobot Terminal Block Board for FireBeetle 2 ESP32-E IoT Microcontroller
Out of stock
EDATEC CM4 Media Baseboard CM4104000 4GB DDR,120G SSD WiFi/Bluetooth Antenna Silver Color CNC Aluminum Case 8MP Camera
Out of stock
| Processor |
Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz H.265 (HEVC) (up to 4Kp60 decode) ,H.264 (up to 1080p60 decode ,1080p30 encode) OpenGL ES 3.0 graphics |
|---|---|
| Memory |
4GB LPDDR4-3200 SDRAM |
| Storage |
Support boot from SD Card( Capacity can be chosen from 32GB~256GB) Support boot from SSD hard disk driver(Capacity can be chosen from 120GB~1TB |
| Multimedia |
8-megapixel camera (Optional ) 2 channel 1W stereo speakers 1-channel MEMS microphone Support headphone jack and external microphone 1 standard HDMI 4K high-definition output interface 1 channel Micro HDMI 4K high-definition output interface |
| Network and wireless |
1 channel 10/100/1000M Ethernet 2.4G/5.8G dual-band WiFi ,compatible with IEEE 802.11 b/g/n/ac Bluetooth BLE5.0 1 official Raspberry Pi external antenna 4G/LTE version optional (non-SSD hard disk version) |
| Interface |
2 channels USB3.0 1 channel way USB2.0 |
| Other |
One-click switch turns on/off the system with power & status LED indication RTC built-in with a backup battery |
| Power Supply |
USB Type C interface ,5V/3A DC input |
| Dimensions (L x W x H) mm |
100 x 100 x 19 |
| Weight |
260g |
| Software Environment |
Raspbian Desktop version pre-installed |
EDATEC CM4 Media baseboard, CM4108000 8GB DDR120G SSD WiFi/Bluetooth Antenna Silver Color CNC Aluminum Case 8MP Camera
Out of stock
| Processor |
Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz H.265 (HEVC) (up to 4Kp60 decode) ,H.264 (up to 1080p60 decode ,1080p30 encode) OpenGL ES 3.0 graphics |
|---|---|
| Memory |
8GB LPDDR4-3200 SDRAM |
| Storage |
Support boot from SD Card( Capacity can be chosen from 32GB~256GB) Support boot from SSD hard disk driver(Capacity can be chosen from 120GB~1TB |
| Multimedia |
8-megapixel camera (Optional ) 2 channel 1W stereo speakers 1-channel MEMS microphone Support headphone jack and external microphone 1 standard HDMI 4K high-definition output interface 1 channel Micro HDMI 4K high-definition output interface |
| Network and wireless |
1 channel 10/100/1000M Ethernet 2.4G/5.8G dual-band WiFi ,compatible with IEEE 802.11 b/g/n/ac Bluetooth BLE5.0 1 official Raspberry Pi external antenna 4G/LTE version optional (non-SSD hard disk version) |
| Interface |
2 channels USB3.0 1 channel way USB2.0 |
| Other |
One-click switch turns on/off the system with power & status LED indication RTC built-in with a backup battery |
| Power Supply |
USB Type C interface ,5V/3A DC input |
| Dimensions (L x W x H) mm |
100 x 100 x 19 |
| Weight |
260g |
| Software Environment |
Raspbian Desktop version pre-installed |