Development Board/Kit
TEXAS INSTRUMENTS LAUNCHXL-RM42 Development Board, on board XDS100v2 J-TAG emulator
Out of stock
NXP Development Board FRDM-KL02Z MKL02Z32VFM4 MCU, Capacitive Touch Slider, Accelerometer, Tri Color LED
Out of stock
| Communication peripherals |
One 8-bit Serial Peripheral Interfaces (SPI) – Two I2C modules – One low-power UART |
|---|---|
| Analog peripherals |
12-bit SAR ADC w/ DMA support – High-speed comparator |
| Processor |
32-bit ARM Cortex-M0+ core |
| Memories |
32 KB flash ,4 KB SRAM |
| Clocks |
4 MHz and 32 kHz internal reference clock |
| Timers |
Two 2-channel Timer/PWM modules – Low-power Timer (LPT) – System tick timer |
DFRobot Beetle RP2040 Mini Development Board
Out of stock
EDATEC ED-CM4NANO10-0208-C baseboard WIFI Antenna Metal Case 2GB RAM and 8GB EMMC
Out of stock
| Model |
ED-CM4NANO10-0208-C |
|---|---|
| Power supply |
12~18V DC voltage range input 5.5/2.5mm DC Jack or Phoenix terminal connector optional |
| Camera and display |
1 x CSI interface ,support Raspberry Pi official 5M & 8M pixel camera module 1 x HDMI port 1 x DSI interface ,support Raspberry Pi official display |
| Wired interface |
1 x Support PoE power supply 10/100M/1000 Ethernet (requires official PoE HAT) 2 x USB3.0 (external) 1 x USB3.0 (built-in) 1 x USB2.0 |
| Wireless communication |
1 x 2.4G/5.8G WiFi compatible with IEEE 802.11 b/g/n/ac standard 1 x Bluetooth 5.0 BLE WiFi/BLE external antenna and PCB antenna are optional |
| Storage |
1 x microSD card holder (used to expand user data storage) Extensible interface: 1 x Raspberry Pi standard 40-pin connector 1 x Raspberry Pi standard 4-pin POE connector |
| Operating temperature |
-25~60°C |
| Software Environment |
Raspberry Pi Raspbian OS installed |
| Dimension |
103 mm(L) x 62 mm(W) x 21.5mm(H) |
| Others |
1 x RTC with a backup battery 1 x Red LED power indicator ,1 x Green LED status indication 1 x system reset button 1 x buzzer |
EDATEC ED-CM4NANO10-0108-C baseboard WIFI Antenna Metal Case 1GB RAM and 8GB EMMC
Out of stock
| Model |
ED-CM4NANO10-0108-C |
|---|---|
| Power supply |
12~18V DC voltage range input 5.5/2.5mm DC Jack or Phoenix terminal connector optional |
| Camera and display |
1 x CSI interface ,support Raspberry Pi official 5M & 8M pixel camera module 1 x HDMI port 1 x DSI interface ,support Raspberry Pi official display |
| Wired interface |
1 x Support PoE power supply 10/100M/1000 Ethernet (requires official PoE HAT) 2 x USB3.0 (external) 1 x USB3.0 (built-in) 1 x USB2.0 |
| Wireless communication |
1 x 2.4G/5.8G WiFi compatible with IEEE 802.11 b/g/n/ac standard 1 x Bluetooth 5.0 BLE WiFi/BLE external antenna and PCB antenna are optional |
| Storage |
1 x microSD card holder (used to expand user data storage) Extensible interface: 1 x Raspberry Pi standard 40-pin connector 1 x Raspberry Pi standard 4-pin POE connector |
| Operating temperature |
-25~60°C |
| Dimension |
103 mm(L) x 62 mm(W) x 21.5mm(H) |
| Software Environment |
Raspberry Pi Raspbian OS installed |
| Others |
1 x RTC with a backup battery 1 x Red LED power indicator ,1 x Green LED status indication 1 x system reset button 1 x buzzer |
EDATEC ED-CM4NANO10-0408-C baseboard WIFI Antenna Metal Case 4GB RAM and 8GB EMMC
Out of stock
| Model |
ED-CM4NANO10-0408-C |
|---|---|
| Power supply |
12~18V DC voltage range input 5.5/2.5mm DC Jack or Phoenix terminal connector optional |
| Camera and display |
1 x CSI interface ,support Raspberry Pi official 5M & 8M pixel camera module 1 x HDMI port 1 x DSI interface ,support Raspberry Pi official display |
| Wired interface |
1 x Support PoE power supply 10/100M/1000 Ethernet (requires official PoE HAT) 2 x USB3.0 (external) 1 x USB3.0 (built-in) 1 x USB2.0 |
| Wireless communication |
1 x 2.4G/5.8G WiFi compatible with IEEE 802.11 b/g/n/ac standard 1 x Bluetooth 5.0 BLE WiFi/BLE external antenna and PCB antenna are optional |
| Storage |
1 x microSD card holder (used to expand user data storage) Extensible interface: 1 x Raspberry Pi standard 40-pin connector 1 x Raspberry Pi standard 4-pin POE connector |
| Operating temperature |
-25~60°C |
| Software Environment |
Raspberry Pi Raspbian OS installed |
| Dimension (L x W x H) mm |
103 x 62 x 21.5 |
| Others |
1 x RTC with a backup battery 1 x Red LED power indicator ,1 x Green LED status indication 1 x system reset button 1 x buzzer |
EDATEC CM4NANO baseboard withCM4108008 WIFI antenna, metal case 8GB RAM and 8GB EMMC
Out of stock
| Model |
ED-CM4NANO10-0408-C |
|---|---|
| Power supply |
12~18V DC voltage range input 5.5/2.5mm DC Jack or Phoenix terminal connector optional |
| Camera and display |
1 x CSI interface ,support Raspberry Pi official 5M & 8M pixel camera module 1 x HDMI port 1 x DSI interface ,support Raspberry Pi official display |
| Wired interface |
1 x Support PoE power supply 10/100M/1000 Ethernet (requires official PoE HAT) 2 x USB3.0 (external) 1 x USB3.0 (built-in) 1 x USB2.0 |
| Wireless communication |
1 x 2.4G/5.8G WiFi compatible with IEEE 802.11 b/g/n/ac standard 1 x Bluetooth 5.0 BLE WiFi/BLE external antenna and PCB antenna are optional |
| Storage |
1 x microSD card holder (used to expand user data storage) Extensible interface: 1 x Raspberry Pi standard 40-pin connector 1 x Raspberry Pi standard 4-pin POE connector |
| Operating temperature |
-25~60°C |
| Software Environment |
Raspberry Pi Raspbian OS installed |
| Dimension (L x W x H) mm |
103 x 62 x 21.5 |
| Others |
1 x RTC with a backup battery 1 x Red LED power indicator ,1 x Green LED status indication 1 x system reset button 1 x buzzer |
EDATEC CM4 Media Baseboard CM4104000 4GB DDR,120G SSD WiFi/Bluetooth Antenna Silver Color CNC Aluminum Case 8MP Camera
Out of stock
| Processor |
Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz H.265 (HEVC) (up to 4Kp60 decode) ,H.264 (up to 1080p60 decode ,1080p30 encode) OpenGL ES 3.0 graphics |
|---|---|
| Memory |
4GB LPDDR4-3200 SDRAM |
| Storage |
Support boot from SD Card( Capacity can be chosen from 32GB~256GB) Support boot from SSD hard disk driver(Capacity can be chosen from 120GB~1TB |
| Multimedia |
8-megapixel camera (Optional ) 2 channel 1W stereo speakers 1-channel MEMS microphone Support headphone jack and external microphone 1 standard HDMI 4K high-definition output interface 1 channel Micro HDMI 4K high-definition output interface |
| Network and wireless |
1 channel 10/100/1000M Ethernet 2.4G/5.8G dual-band WiFi ,compatible with IEEE 802.11 b/g/n/ac Bluetooth BLE5.0 1 official Raspberry Pi external antenna 4G/LTE version optional (non-SSD hard disk version) |
| Interface |
2 channels USB3.0 1 channel way USB2.0 |
| Other |
One-click switch turns on/off the system with power & status LED indication RTC built-in with a backup battery |
| Power Supply |
USB Type C interface ,5V/3A DC input |
| Dimensions (L x W x H) mm |
100 x 100 x 19 |
| Weight |
260g |
| Software Environment |
Raspbian Desktop version pre-installed |
EDATEC CM4 Media baseboard, CM4108000 8GB DDR120G SSD WiFi/Bluetooth Antenna Silver Color CNC Aluminum Case 8MP Camera
Out of stock
| Processor |
Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz H.265 (HEVC) (up to 4Kp60 decode) ,H.264 (up to 1080p60 decode ,1080p30 encode) OpenGL ES 3.0 graphics |
|---|---|
| Memory |
8GB LPDDR4-3200 SDRAM |
| Storage |
Support boot from SD Card( Capacity can be chosen from 32GB~256GB) Support boot from SSD hard disk driver(Capacity can be chosen from 120GB~1TB |
| Multimedia |
8-megapixel camera (Optional ) 2 channel 1W stereo speakers 1-channel MEMS microphone Support headphone jack and external microphone 1 standard HDMI 4K high-definition output interface 1 channel Micro HDMI 4K high-definition output interface |
| Network and wireless |
1 channel 10/100/1000M Ethernet 2.4G/5.8G dual-band WiFi ,compatible with IEEE 802.11 b/g/n/ac Bluetooth BLE5.0 1 official Raspberry Pi external antenna 4G/LTE version optional (non-SSD hard disk version) |
| Interface |
2 channels USB3.0 1 channel way USB2.0 |
| Other |
One-click switch turns on/off the system with power & status LED indication RTC built-in with a backup battery |
| Power Supply |
USB Type C interface ,5V/3A DC input |
| Dimensions (L x W x H) mm |
100 x 100 x 19 |
| Weight |
260g |
| Software Environment |
Raspbian Desktop version pre-installed |
EDATEC ED-CM4SEN baseboard with WIFI Antenna 4G Module Metal Case 1GB RAM and 8GB EMMC
Out of stock
| Industrial interface |
4 x RS485 1 x RS232 1 x CAN 1 x RTC with a backup battery 1 x Red LED power indicator ,1 x Green LED status indication 1 x buzzer |
|---|---|
| Display |
1 x Standard HDMI port 1 x HDMI by FPC cable 1 x DSI interface+1 x 5V@1.5A output ,support Raspberry Pi official display |
| Wired interface |
1 x 10/100M/1000 Ethernet 2 x USB2.0 (external) 1 x Micro USB2.0 (Inside the case ,for programming) |
| Wireless communication |
1 x 4G/LTE module 1 x 2.4G/5.8G WiFi compatible with IEEE 802.11 b/g/n/ac standard 1 x Bluetooth 5.0 BLE Official Raspberry Pi WiFi/BLE external antenna |
| Storage |
1 x microSD card holder (used to expand user data storage) |
| Expansion interface |
1 x Mini PCI-e socket for PCIe Gen2 x1 |
| Power supply |
12~18V DC voltage range input 5.5/2.5mm DC Jack or Phoenix terminal connector optional |
| Operating temperature: |
-25~60°C |
| Dimension (L x W x H) |
103 x 73 x 32 |
| Software Environment |
Raspberry Pi Raspbian OS installed Support removing software upgrade |
EDATEC ED-CM4SEN baseboard with WIFI Antenna 4G Module Metal Case 2GB RAM and 8GB EMMC
Out of stock
| Industrial interface |
4 x RS485 1 x RS232 1 x CAN 1 x RTC with a backup battery 1 x Red LED power indicator ,1 x Green LED status indication 1 x buzzer |
|---|---|
| Display |
1 x Standard HDMI port 1 x HDMI by FPC cable 1 x DSI interface+1 x 5V@1.5A output ,support Raspberry Pi official display |
| Wired interface |
1 x 10/100M/1000 Ethernet 2 x USB2.0 (external) 1 x Micro USB2.0 (Inside the case ,for programming) |
| Wireless communication |
1 x 4G/LTE module 1 x 2.4G/5.8G WiFi compatible with IEEE 802.11 b/g/n/ac standard 1 x Bluetooth 5.0 BLE Official Raspberry Pi WiFi/BLE external antenna |
| Storage |
1 x microSD card holder (used to expand user data storage) |
| Expansion interface |
1 x Mini PCI-e socket for PCIe Gen2 x1 |
| Power supply |
12~18V DC voltage range input 5.5/2.5mm DC Jack or Phoenix terminal connector optional |
| Operating temperature: |
-25~60°C |
| Dimension (L x W x H) |
103 x 73 x 32 |
| Software Environment |
Raspberry Pi Raspbian OS installed Support removing software upgrade |
NanoPi R2S
Out of stock
| CPU |
Rockchip RK3328 |
|---|---|
| Number of Cores |
Quad-Core Cortex-A53 |
| Frequency |
4 x Cortex-A53 Up to 1.3GHz |
| DDR4 RAM |
1GB |
| Network |
Internal 10/100/1000M Ethernet Port x 1 USB3.0 converted 10/100/1000M Ethernet Port x 1 |
| USB Host |
USB 2.0 Host x1: USB Type A |
| USB-C x1 |
Power input(5V/2A) and Slave |
| Debug Serial Port/UART0 |
3.3V TTL ,3-pin 2.54mm pitch connector Buttons User button x 1 |
| MicroSD Slot |
1 |
| LED |
3 |
| PCB Dimension |
55.6 x 52mm |
| Power |
DC 5V/2A |
| Working temperature |
0℃ to 80℃ |
| Os Supports |
FriendlyWrt 21.02.1 (64-bit) ,FriendlyCore Focal Lite (Base on Ubuntu 20.04) |