pH
AFM3000 Mass Flow Meter
Out of stock
| Product Type |
Mass Flow Meter |
|---|---|
| Model |
AFM3000 |
| Operating Voltage(V) |
4.75-5.5VDC |
| Measurement Range |
200～+200SLM |
| Accuracy |
1.5% m.v. (typical) |
| Repeatability |
±0.5%(typical)Test gases air ,N2 ,O2 ,non – corrosive gases |
| Color |
Asper Image |
| Flow range |
+/- 200 slm (bidirectional) |
| Calibration |
Air，N2，O2 |
| Interface |
I2C |
Mikroe DIFF PRESS CLICK
Out of stock
RENESAS Flow Sensor, FS1012 Series, Gas, MEMS, 10000 SCCM, 3 V to 5 V, mV Output
Out of stock
DFRobot Gravity Lab Grade Analog pH Sensor/Meter Kit V2
Out of stock
| Supply Voltage |
3.3~5.5V |
|---|---|
| Output Voltage |
0~3.0V |
| Probe Connector |
BNC |
| Signal Connector |
PH2.0-3P |
| Measurement Accuracy |
±0.1 at 25℃ |
| Probe Type |
Laboratory Grade |
| Detection Range |
0~14 |
| Temperature Range |
5~60°C |
| Zero Point |
7±0.5 |
| Response Time |
<2min |
| Internal Resistance |
<250MΩ |
| Probe Life |
>0.5 years (depending on the frequency of use) |
| Dimension |
42mm x 32mm/1.66 x 1.26in |
AFM0200 Micro Flow Sensor
Out of stock
Water Flow Sensor (Sea) YFDN50 Flowmeter G2 10- 200L/min 5-24V
Out of stock
Water Flow Sensor (Sea) YFDN50 Flowmeter G2 10- 200L/min 3.5-12V
Out of stock
DFRobot Gravity Analog pH Sensor for Arduino
Out of stock
TE CONNECTIVITY Flow Switch, FS-10, 0 ml/min to 500 ml/min, 15 mm Port Size, 10 bar, SPST-NO, 300 Vac, 1 A
Out of stock
Adafruit LPS33HW Water Resistant Pressure Sensor – STEMMA QT RoHS Compliant
Out of stock
| Brand |
Adafruit |
|---|---|
| Product Type |
LPS33HW Water Resistant Pressure Sensor |
| Power Pins |
Vin 3Vo GND |
| Voltage(V) |
3-5V |
| I2C Logic pins: |
SCK – this is the I2C clock pin ,connect to your microcontrollers I2C clock line SDI – this is the I2C data pin ,connect to your microcontrollers I2C data line. |
| SPI Logic pins: |
SCK – This is also the SPI Clock pin ,its an input to the chip SDO – this is the Serial Data Out / Microcontroller In Sensor Out pin ,for data sent from the LPS35HW to your processor SDI – this is also the Serial Data In / Microcontroller Out Sensor In pin ,for data sent from your processor to the LPS35HW CS – this is the Chip Select pin ,drop it low to start an SPI transaction. Its an input to the chip |
| Support |
I2C or SP |
| Length (mm) |
2.5 |
| Width (mm) |
2 |
| Height (mm) |
0.5 |
| Weight (g) |
1g |
OF06ZAT G3/4 DN20 Water Flow Sensor (Sea) Liquid Like Milk Diesel Gasoline Solene Gasolene Benzine Petrol Oil Flow Meter
Out of stock
DFRobot Gravity Liquid Flow Sensor (G1/2)
Out of stock