Single Board Computer
reComputer J4012-Edge AI Device with NVIDIA Jetson Orin NX 16GB module, 4xUSB 3.2, M.2 Key E & Key M Slot, Aluminum case, Pre-installed JetPack System on 128GB NVMe SSD
Out of stock
| Model |
reComputer J4012 |
|---|---|
| Variant |
Jetson Orin NX 16GB |
| AI Performance |
100 TOPS |
| GPU |
1024-core NVIDIA Ampere architecture GPU with 32 Tensor Cores |
| GPU Max Frequency |
918 MHz |
| CPU |
8-core Arm® Cortex®-A78AE v8.2 64-bit CPU 2MB L2 + 4MB L3 |
| CPU Max Frequency |
2 GHz |
| Memory |
16GB 128-bit LPDDR5 102.4GB/s |
| DL Accelerator |
2x NVDLA v2 |
| DLA Max Frequency |
614 MHz |
| Vision Accelerator |
1x PVA v2 |
| Video Encoder |
1x 4K60 (H.265) ,3x 4K30 (H.265) 6x 1080p60 (H.265) ,12x 1080p30 (H.265) |
| Video Decoder |
1x 8K30 (H.265) ,2x 4K60 (H.265) ,4x 4K30 (H.265) 9x 1080p60 (H.265) ,18x 1080p30 (H.265) |
| Display |
1* HDMI 2.1 |
| CSI Camera |
2* CSI （2-lane 15pin） |
| M.2 Key |
1* M.2 Key M 1* M.2 Key E |
| Fan |
1* 4 pin Fan Connector(5V PWM) |
| CAN |
1* CAN |
| Multifunctional Port |
1* 40-Pin Expansion header ,1* 12-Pin Control and UART header |
| RTC |
RTC 2-pin ,RTC socket |
| Operating Voltage |
9-19V |
| Power Supply |
DC 12V/5A(Barrel Jack 5.5/2.1mm) |
| Operating Temperature |
-10℃~60℃ |
| Dimension (mm) |
130 x 120 x 58.5 |
Waveshare Aluminum Case (Type F) for the Jetson Nano Development Kit
Out of stock
ODROID-M1 with 4GByte RAM
Out of stock
| POWER |
1 x DC jack : outer (negative) diameter 5.5mm ,inner (positive) diameter 2.1mm DC input : 7.5V ~ 15.5V – DC 12V/2A power adapter is recommended – IDLE : ≃ 1.25W – CPU Stress : ≃ 4.44W (Performance governor) – Power Off : ≃ 0W |
|---|---|
| FORM FACTOR |
Board Dimensions: 90mm x 122mm x 16mm Heatsink Dimensions: 100mm x 123mm x 19mm Weight: 253 g including heatsink |
| PROCESSOR |
Rockchip RK3568 Processor L1 instruction cache: 32 KB ,4-way set associative (128 sets) ,64 byte lines ,shared by 1 processor L1 data cache: 32 KB ,4-way set associative (128 sets) ,64 byte lines ,shared by 1 processor L3 data cache: 512KB ,16-way set associative (512 sets) ,64 byte lines ,shared by 4 processorsQuad-Core Cortex-A55 (1.992GHz) ARMv8-A architecture with Neon and Crypto extensions Mali-G52 MP2 GPU with 4 x Execution Engines (650Mhz) |
| NPU |
0.8Tops@INT8 ,integrated high-performance AI accelerator RKNN NPU Supports one-click switching of Caffe/TensorFlow/TFLite/ONNX/PyTorch/Keras/Darknet |
| MEMORY |
4 or 8GiB LPDDR4 with 32-bit bus width Data rate: 3120 MT/s ,up to 1 ,560MHz |
| STORAGE |
1 x eMMC slot 1 x Micro SD slot (DS/HS mode up to UHS-I SDR104) 1 x NVME M.2 SSD (PCIe 3.0 x 2) 1 x SATA3.0 |
| NETWORKING |
1 x GbE LAN ports (RJ45 ,supports 10/100/1000 Mbps) – Realtek RTL8211F (Ethernet transceiver) – LED indicators * Green LED: Flashing by data traffics at 100Mbps connection * Amber LED: Flashing by data traffics at 1000Mbps connection |
| VIDEO |
1 x HDMI 2.0 (up to 4K@60Hz with HDR ,EDID) 1 x MIPI-DSI (works with 800 x 1280 LCD) |
| AUDIO |
1 x 3.5mm phone jack 1 x mono speaker output 1 x HDMI sound |
| EXTERNAL I/O |
2 x USB 2.0 host port 2 x USB 3.0 host port (or 1 x USB 3.0 host + 1 x USB 2.0 OTG port) 1 x Debug serial console (UART ,1.5Mbps N81) 1 x SATA Connector 1 x MIPI-CSI Camera Interface (15 pin) 1 x MIPI-DSI LCD Interface (31 pin) 1 x 40pin GPIO header |
ODROID-N2L with 2GByte RAM
Out of stock
ODROID-H3+ Single Board Computer
Out of stock
| Processor |
Intel Celeron N6005 Processor (10nm ,Quad-Core ,TDP 10W) H3+(N6005) : up to 3.3Ghz 4MB L2 Cache Intel UHD Graphics (24/32 EU up to 900MHz) |
|---|---|
| Networking |
2 x GbE LAN ports (RJ45 ,supports 10/100/1000/2500 Mbps) Realtek RTL8125B Supports Wake-On-Lan LED indicators (Green: Link ,Amber: Traffic |
| Memory |
2 x DDR4 1.2V SO-DIMM slots Dual Channel ,up to 2933 MT/s (DDR4-PC23400) Max memory capacity 64GB DDR3/DDR5 are not supported |
| Storage |
1 x eMMC connector (bootable and selectable on BIOS) Various eMMC modules can be purchased at the Hardkernel store 2 x SATA3 6Gbps ( SATA Port-Multiplier is NOT compatible ) 1 x M.2 slot (PCIe 3.0 x 4 ,supports NGFF-2280 cards) M.2 SATA SSD is not supported |
| Video |
1 x DisplayPort 1.2 (up to 4K@60Hz) 1 x HDMI 2.0 (up to 4K@60Hz) Dual simultaneous display support |
| Audio |
1 x Audio out (3.5mm jack) 1 x Audio in (3.5mm jack) 1 x SPDIF out (ALC1200 ,HDA codec) * HDMI & DP have audio output too. |
| External I/O |
2 x USB 3.0 Host ports 2 x USB 2.0 Host ports 1 x Peripheral Expansion Header (24-pin ,2.54mm pitch) – 1 x DC 5V ,1 x DC 3.3V ,5 x GND – 1 x UART (TXD/RXD/RTS/CTS) – 2 x I2C (SCL/SDA) – 1 x External Power Button – HDMI CEC ,5VA+ – 3 x USB 2.0 – All 3.3V I/O signal level |
| Other features |
Passive Heatsink BIOS Backup Battery – Maintains system time and BIOS settings Power Button Reset Button System LEDS Indicators: – Red (PWR) – Solid light when DC power is supplied – Blue (left ,SLEEP) – turns off only when the system enters into suspend mode – Blue (right ,PMIC) – turns on only when the major power rails are working – Amber (SATA) – Flashes when SATA data transfers – Green (NVMe) – Flashes when NVMe data transfers Active Cooling Fan Connector (12V 4-pin ,PWM input + TACHO output) – Active Cooling Fan is optional – Connector (4-pin ,2.54mm pitch) |
| Power |
DC jack : outer (ground) diameter 5.5mm ,inner(positive) diameter 2.1mm DC 14V ~ 20V (up to 60W) – DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs – DC 19V/7A power adapter is recommended if you two 3.5” HDDs together Power consumption: – IDLE : ≃1..9W – CPU Stress : ≃15W – CPU+GPU Stress : ≃18W – Power-off : ≃0.25W – Suspend : ≃0.6W |
| Form Factor |
110mm x 110mm x 47mm Approx. |