LORA WiFi
Explore our range of LORA WiFi products, designed to meet high standards and diverse needs. Perfect for enthusiasts and professionals alike.
- Features: Our lora wifi are crafted with precision, ensuring durability and efficiency for various applications.
- Quality Assurance: Every product undergoes rigorous quality checks to meet industry standards, guaranteeing reliable performance.
- Delivery: We offer prompt and secure delivery to ensure that your lora wifi reaches you on time, no matter where you are located.
Choose from our selection of lora wifi and enhance your projects with top-notch components.
SenseCAP M1 LoRaWAN Indoor Gateway(4G RAM+SX1302) – EU868
Out of stock
| Processor |
Raspberry Pi 4 (Broadcom BCM2711 ,Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz) |
|---|---|
| RAM |
4GB |
| Storage |
64GB MicroSD Card |
| Frequency |
US915 Version: 902MHz ~ 928MHz – For USA and Canada |
| Sensitivity |
125dBm @125KHz/SF7 -139dBm @125KHz/SF12 |
| TX Power |
Up to 26 dBm |
| Antenna Gain |
US915: 2.6 dBi |
| Antenna Impedance |
50 Ohm |
| Antenna Radiation Pattern |
Omni-Directional |
| Connectivity |
Wi-Fi 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless Bluetooth 5.0 ,BLE LoRaWAN Supports Class A ,C |
| Input Voltage |
DC 5V – 3A |
| Interfaces |
USB Type-C (Power Supply) * 1 Ethernet RJ45 * 1 RP-SMA Female Antenna Connector* 1 |
| Operating Temperature |
0°C to 50°C |
| Relative Humidity |
0% – 90% (non-condensing) |
| Heat Dissipation |
Aluminum enclosure ,a heatsink ,and a cooling fan |
| IP Grade |
IP20 |
| GTIN |
110991634 |
STEVAL-STRKT01 Evaluation Board, LoRa IoT Tracker, Full IoT GNSS Asset Tracking Solution
Out of stock
WM1302 LoRaWAN Gateway Module (SPI) – US915, based on LoRa Concentrator Semtech SX1302
Out of stock
| Processor |
STMicro STM3L412 Arm Cortex-M4 microcontroller @ 80 MHz with 40KB RAM ,64 or 128KB flash |
|---|---|
| Transceiver |
Semtech SX1302 LoRa with 2x SX1250 Tx/Rx front-ends |
| Transmit Power (dBm) |
Up to 26dBm @ 3.3V |
| Receiver Type |
Down to -139dBm @ SF12 ,BW 125 kHz; -125dBm @ 125K/SF7 |
| No. of Band |
EU868 ,US915 ,AS923 ,AS920 ,AU915 ,KR920 ,and IN865. u.FL antenna connector |
| SPI version |
Standby: 7.5 mA; Tx up to 415 mA; Rx: 40 mA |
| USB version |
Standby: 20 mA; Tx up to 425 mA; Rx: 53 mA |
| Interface |
SPI or USB interface on 52-pin mPCIe edge connector |
EDATEC 868M Lora Module for EU base on SX1303 CE
Out of stock
| Series |
ED-GW1303 |
|---|---|
| Voltage - Supply |
3V ~ 3.6V |
| Current - Receiving |
54mA |
| Current - Transmitting |
306mA |
| Package |
Box |
| Product Status |
Active |
| RF Family/Standard |
Navigation |
| Protocol |
LoRa Modulation |
| LoRa Frequency |
868MHz |
| Power-Output |
25dBm |
| Serial Interfaces |
SPI |
| Antenna Type |
Antenna Included ,I-PEX |
| Utilized IC / Part |
SX1303 |
| Mounting Type |
Card Edge |
| Operating Temperature |
0°C ~ 60°C |
LoRaE5 mini (STM32WLE5JC)
Out of stock
| Operating Voltage(V) |
3.7V – 5V |
|---|---|
| Output Voltage(V) |
+20.8 dBm at 3.3V |
| Working frequency |
868/915MHz |
| Sensitivity (dBm) |
-106 ,116.5 dBm ~ -136 dBm |
| Modulation Type |
LoRa ,(G)FSK ,(G)MSK ,BPSK |
| Working Temperature Range (°C) |
-40℃ ~ 85℃ |
| Interface |
USB Type C / 2P-2.54mm Hole / 1*12P-2.54mm Header*2 / SMA-K / IPEX |
Wireless Transmitter 433Mhz, Lora Shield for Leonardo,, UNO, Mega2560,, Duemilanove, Due
Out of stock
ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino ( Type C- Connector )
Out of stock
Wireless Transmitter 915Mhz, Lora Shield for Leonardo,, UNO, Mega2560,, Duemilanove, Due
Out of stock
E32-900T30D LoRa 862 to 915Â MHz SX1276 Wireless Transmitter and Receiver RF Module
Out of stock
2.4G RFM98 LoRa Radio Node v1.0 Based on S x1278-(868 Mhz)
Out of stock
2.4G RFM98 LoRa Radio Node v1.0 Based on S x1278-(915 Mhz)
Out of stock
2.4G RFM98 LoRa Radio Node v1.0 Based on S x1278-(433 Mhz)
Out of stock