-
Fast Shipping
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹3,016.61 (Including tax)
Discount per Bulk Quantity
Quantity | Discount | Price |
---|---|---|
5 - 10 | 5% | ₹2,865.79 (Including tax) |
11 - 20 | 8% | ₹2,775.27 (Including tax) |
21 - 40 | 10% | ₹2,714.95 (Including tax) |
41 - 100 | 12% | ₹2,654.62 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
The MKR ZERO board acts as a great educational tool for learning about 32-bit application development. It has an onboard SD connector with dedicated SPI interfaces (SPI1) that allows you to play with MUSIC files with no extra hardware! The board is powered by Atmel’s SAMD21 MCU, which features a 32-bit ARM Cortex® M0+ core.
The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a LiPo battery. The battery voltage can also be monitored since a connection between the battery and the analog converter of the board exists.
Note: Unlike most Arduino & Genuino boards, the MKRZero runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board.
1 x Arduino MKR Zero
Microcontroller Chip |
SAMD21 Cortex-M0+ 32bit low power ARM MCU |
---|---|
Operating Voltage (VDC) |
3.3 |
Input Voltage(Recommended) |
5 V |
Analog I/O Pins |
Input Pins:7 ,Output Pins:1 |
Digital I/O Pins |
22 |
PWM Digital I/O Pins |
12 |
Clock Speed |
48MHz |
Flash Memory |
256 KB |
SRAM |
32 KB |
DC Current for 3.3V Pin (mA) |
600 |
Dimensions in mm (LxWxH) |
61.5x25x4 |
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
Model Type |
Leonardo |
---|---|
Microcontroller Chip |
ATmega32u4 |
Operating Voltage (VDC) |
5 |
Input Voltage(Recommended) |
7V to 12V |
Input Voltage (limit) |
6V-20V |
Analog I/O Pins |
12 |
Digital I/O Pins |
20 |
PWM Digital I/O Pins |
7 |
Clock Speed |
16 MHz |
Flash Memory |
32 KB (ATmega32u4) of which 4 KB used by bootloader |
SRAM |
2.5 KB (ATmega32u4) |
EEPROM |
1 KB (ATmega328) |
Weight (gm) |
20 |
Length (mm) |
68.6 |
Width (mm) |
53.3 |
Out of stock
Microcontroller Chip |
SAMD21 Cortex®-M0+ 32bit low power ARM MCU |
---|---|
Operating Voltage (VDC) |
3.3 |
Input Voltage(Recommended) |
5 V |
Analog I/O Pins |
Input Pins:7 ,Output Pins:1 |
Digital I/O Pins |
8 |
PWM Digital I/O Pins |
13 |
Clock Speed |
32.768 kHz (RTC) ,48 MHz |
Flash Memory |
256 KB (internal) |
SRAM |
32 KB |
DC Current per I/O Pin (mA) |
7 |
Dimensions in mm (LxWxH) |
83x25x2 |
Weight (gm) |
43 |
Out of stock
Model Type |
Arduino MKR1000 WIFI |
---|---|
Microcontroller Chip |
SAMD21 Cortex-M0+ 32bit low power ARM MCU |
Operating Voltage (VDC) |
5V |
Analog I/O Pins |
(Input Pin )7 (ADC 8/10/12 bit) ,(Output Pins) 1 (DAC 10 bit) |
Digital I/O Pins |
8 pins |
PWM Digital I/O Pins |
12 (0 ,1 ,2 ,3 ,4 ,5 ,6 ,7 ,8 ,10 ,A3 – or 18 – ,A4 -or 19) |
Clock Speed |
32.768 kHz (RTC) ,48 MHz |
Flash Memory |
256 KB (internal) |
SRAM |
32 KB |
EEPROM |
NO |
LED_BUILTIN |
6 |
DC CURRENT PER I/O PIN |
7mA |
EXTERNAL INTERRUPTS |
8 (0 ,1 ,4 ,5 ,6 ,7 ,8 ,A1 -or 16- ,A2 – or 17) |
SUPPORTED BATTERY |
Li-Po single cell ,3.7V ,700mAh minimum |
UART |
1 |
SPI |
1 |
12C |
1 |
Length(cm) |
6 |
Width (cm) |
2.5 |
Hight (mm) |
.5 |
Weight (gm) |
0.007 |
Out of stock
Microcontroller |
nRF52840 |
---|---|
Operating Voltage |
3.3V |
Input Voltage (Limit) |
21V |
DC Current per I/O Pin |
15mA |
Clock Speed |
64MHz |
CPU Flash Memory |
1MB |
SRAM |
256KB |
EEPROM |
none |
Digital Input / Output Pins |
14 |
PWM pins |
All Digital Pins |
UART |
1 |
SPI |
1 |
I2C |
1 |
Analog Input Pins |
8 (ADC 12 bit 200 ksamples) |
Analog Output Pins |
Only through PWM (no DAC) |
USB |
Native in the nRF52840 Processor |
IMU |
9 axis IMU Its a Combination of two (BMI270 – 6 axis IMU and BMM150 – 3 axis IMU). |
Microphone |
MP34DT05 |
Gesture, light, proximity |
APDS9960 |
Barometric pressure |
LPS22HB |
Temperature, humidity |
HTS221 |
Length (mm) |
45 |
Width (mm) |
18 |
Weight (gm) |
5 |
Out of stock
Microcontroller |
64 MHz Arm® Cortex M4 (nRF52832) |
---|---|
Sensors |
& humidity sensor with AI ,BHI260AP – Self-learning AI smart sensor with ,BME688 – Digital low power gas ,pressure ,temperature ,Digital pressure sensor ,BMM150 – Geomagnetic sensor ,integrated accelerometer and gyroscope ,BMP390 – |
I/O Ports |
(with ext. ESLOV connector) ,1x serial port ,1x SPI ,2x ADC ,programmable I/O voltage from 1.8-3.3V ,Castellated pins with the following features: 1x I2C bus |
Connectivity |
Bluetooth® 4.2 |
Operating Power |
Micro USB (USB-B) ,Pin Header ,3.7V Li-po battery with Integrated battery charger |
Memory |
2MB QSPI dedicated for BHI260AP ,512KB Flash / 64KB RAM ,2MB SPI Flash for storage |
Interface |
USB interface with debug functionality |
Dimensions (mm) LxWxH |
22 ,86 mm x 22 ,86 mm |
Weight (g) |
2 g |
Out of stock
Out of stock
Out of stock
Model Type |
Uno Rev3 SMD |
---|---|
Microcontroller Chip |
ATmega328P |
Operating Voltage (VDC) |
5 |
Input Voltage(Recommended) |
7 to 12 V |
Input Voltage (limit) |
6-20V |
Analog I/O Pins |
6 |
Digital I/O Pins |
14 (of which 6 provide PWM output) |
PWM Digital I/O Pins |
6 |
Clock Speed |
16 MHz |
Flash Memory |
32 KB (ATmega32u4) of which 4 KB used by bootloader |
SRAM |
2 KB (ATmega328P) |
EEPROM |
1 KB (ATmega328P) |
Weight (gm) |
25 |
Length (mm) |
68.6 |
Width (mm) |
53.4 |
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.