Keep your  Raspberry Pi 4 Model B safe and protected with this cheap but strong red-white Plastic case is made of strong plastic material designed for Pi 4B model. It will provide adequate protection for your Pi and access to all the ports. This case comes with a Raspberry LOGO engraved on the white top of the cover and Rubber pads at the bottom to provide grip to the cabinet.

This five-Piece Case for Pi 4 is also designed so that you can see the smooth Pi status LEDs clearly from the rubber reflector provided to the case. With this case, you won’t need to put any effort into fitting the Pi inside the case as well as opening and closing of a case is not complicated as an acrylic one.  It fits the pi accurately just like the mobile phone cover.

Note: This is a Standard Quality Case. We also have Offical Raspberry Pi Case Click Here to See

Features:

1. Easy open-close design
2. Holes for mounting the pi inside the case
3. Rubber pad grip at the bottom
4. Precise access to all port and status LEDs with Symbols
5. Raspberry LOGO on Top

Package Includes:

1 x Raspberry Pi 4 Case-Red-White

Though you can run a Raspberry Pi effectively without one, many want a case that can protect the single-board computer while offering an attractive design, built-in cooling or even special features

Dimensions 

Note: Buy Raspberry pi separately

Features: 

1. Aluminum Material
2. Adopting Aluminum Material, With Oxidation Sand-Blasting Surface
3. Compatible With Certain Raspberry Pi HATs
4. DIN Rail Mount Design
5. Easy-To-Use
6. The Inner Space Allows Accommodating Add-Ons Like  PoE HAT (D)  To Enable PoE Feature

Packages Includes: 

1 x Raspberry Pi 4B Case

This Case is very Safe to use with Display & raspberry Pi 4 and make product easy to handle

Features:

1. Brand waveshare
2. Colour: Black
3. Aluminum Material
4. Adopting Aluminum Material, With Oxidation Sand-Blasting Surface
5. Material: Aluminium
6. Hard Disk: Form Factor 3.5 Inches
7. Motherboard Compatibility: Raspberry pi 4 model b

Specification:

1. Manufacturer: Waveshare Raspberry Pi
2. Model: ‎Raspberry pi 4
3. Model Name: ‎Raspberry pi 4 Model b Case
4. Item model number: ‎Raspberry pi 4
5. Number Of Items: ‎1
6. Batteries Required: ‎No
7. Wireless Type: ‎Bluetooth
8. Material: ‎Aluminium
9. Manufacturer: ‎REES52 Raspberry Pi

Packages Includes:

1 x 3.5inch Display Aluminum Alloy Case for Raspberry Pi 4

This is a must-have accessory to experience the high performance of the Raspberry Pi 3B/3B+Models. The Aluminium Alloy Case with Double Dual Cooling Fan Heat Sink Metal Case is designed especially for Raspberry Pi 3

This is a premium quality heat sink for industrial and continuous use applications for the Raspberry Pi 4. This heat sink enables the Raspberry Pi to function with very high reliability and at higher efficiencies for applications that require the maximum computing power of the Pi 3B/3B+

Note: Raspberry Pi show

How to Assemble:

Assembly of your heatsink should be quick and easy. First and foremost, make sure your Raspberry Pi 3B/3B+is powered off and unplugged.

Next, take a thermal thermal pad, peel off the protective covers and attach it to the CPU of your Raspberry Pi. If you would like, you can attach thermal pads to the DDR4 RAM chip, however, it isn’t a necessity.

Finally, you will need to position the top half of the case with the correct orientation, while simultaneously positioning the bottom half underneath your Pi. Grab your hex screws and trusty hex key, secure your new Pi heatsink case in place. If after assembly there is a visible gap between the CPU and the heatsink, disassemble and use an additional thermal pad.

Connect the fan wire as shown below (the orientation of red & black will control which direction the fan blows. They can be reversed).

Features:

1. Type: Raspberry 3B/3B+Aluminum Alloy Metal Case
2. Material: Black Aluminum Alloy Metal
3. Compatible For：Raspberry PI3B/3B+
4. Easy to install, Ultra-thin design.
5. Open case design with Daul Fans for Fast Heat dissipation.
6. All ports and slots of the case can match with Raspberry Pi 3B/3B+Model B perfectly
7. Lightweight and durable, Long-lasting stainless
8. Size: 87mm*56mm*25mm

Package Includes:

1 x  Metal Aluminum Case  – Black

2 x Fan with Connector

1 x Thermal Tape Set

1 x Screw Set

Keep your  Raspberry Pi 4 Model B safe and protected with an all-new Raspberry 4B Black Injection Molding Premium Case Supporting 3007 Fans.. As we said it Premium, this case is made of strong ABS plastic material and meticulously designed for Pi 4 with very precise cutting for all ports and slots. Additionally, the case has a classy texture and design which makes it premium.

 This case can support a 3007 fan for better cooling and Rubber pads at the bottom to provide grip to the cabinet.

This Three-Piece ABS Case for Pi 4 is also designed so that you can get the GPIO and Camera strip out of the case with a slot provided. With this case, you won’t need to put any effort into fitting the Pi inside the case as well as opening and closing of a case is not complicated as an acrylic case.  you just need to put pi on the bottom plate and lock it inside.

Note: The Raspberry Pi shown in the figure is not included you have to purchase it separately.

Note: For ventilation, there is small gap between upper part of the case and lower body.

Features:

1. Easy three-piece installation design
2. Easy fitment of Pi board without
3. Rubber pad grip at the bottom
4. Precise access to all port and cable strips
5. Injection Molded Construction
6. Supports 3007 Fans.

Package Includes:

1 x Raspberry 4B Black Injection Molding Premium Case Supporting 3007 Fans.

This is a must-have accessory to experience the high performance of the Raspberry Pi 4 Models. The Aluminum Alloy Case with Double Dual Cooling Fan Heat Sink Metal Case is designed especially for Raspberry Pi 4 Model B.

This is a premium quality heat sink for industrial and continuous use applications for the Raspberry Pi 4. This heat sink enables the Raspberry Pi to function with very high reliability and at higher efficiencies for applications which require the maximum computing power of the Pi 4.

Dimensions

Features: 

1. Type: Raspberry 4B Aluminum Alloy Metal Case
2. Material: Black Aluminum Alloy Metal
3. Compatible For Raspberry PI 4
4. Easy to install, Ultra-thin design.
5. Open case design with Dual Fans for Fast Heat dissipation.
6. All ports and slots of the case can match with Raspberry Pi 4 Model B perfectly
7. Lightweight and durable, Long-lasting stainless
8. Built-In Active Radiator with Fins
9. Cooling Case for Raspberry Pi 4

Packages Includes: 

1 x Stripe Aluminum Cooling Case for Raspberry Pi 4, Built-In Active Radiator with Fins