- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Charges batteries in pairs.
- Charge time 0.75 up to 4 hours.
- 240 minutes.
- Charging indicators.
- Bad cell detection.
Add to Wishlist
Add to Wishlist
- FPGA: Intel® Cyclone® 10CL016
- PCI: Mini PCI Express port with programmable pins
- Camera Connector: MIPI camera connector
- Microcontroller: SAMD21 Cortex®-M0+ 32bit low power ARM MCU
- Radio module: u-Blox NINA-W102 (datasheet)
- Board Power Supply :(USB/VIN) 5V
- All pins are PWM pins
- MIPI camera connector
- Mini PCI Express port with programmable pins
- Full-Speed USB Device and embedded Host
Add to Wishlist
Add to Wishlist
- Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU
- Board Power Supply (USB/VIN): 5V
- Supported Battery(*): Li-Po single cell, 3.7V, 700mAh minimum
- DC Current for 3.3V Pin: 600mA
- Comes with a micro SD card holder
Add to Wishlist
Add to Wishlist
- AC Input Voltage:100-240V 50/60Hz
- Output Voltage:12V/24V
- Output Current:12V10A&24V5A
- Output Volt under No Load:27.6V
- Minimum Start Volt: >9.0V
- Input Power with Load: MAX.120W
- Input Power under no Load:2.8W
- Dimension:158x90x50mm
Add to Wishlist
Add to Wishlist
Case Material: Plastic
Case Size:112x75x38mm
Weight:357.7g
Add to Wishlist
Add to Wishlist
- Shorter Time-To-Market
- Give new life to existing products
- Add connectivity for monitoring and control
- Tailor it to your need, each I/O pin can be configured
- Make equipment smarter to be ready for the AI revolution
Add to Wishlist
Add to Wishlist
- Microcontroller: ATmega328P
- Circuit operating voltage: 5V
- The input voltage ranges from 6v to 20V
- Digital I/O Pins: 14
- Analog i/p pins are 6.
- 1 kb of EEPROM memory
- USB connector: USB-C
Add to Wishlist
Add to Wishlist
- ATmega32U4 Microcontroller
- Input Voltage: 7-12V
- 20 Digital I/O Pins
- micro USB connection
Add to Wishlist
Add to Wishlist
- 14 digital inputs/outputs, including 6 PWM inputs
- 6 analog inputs
- 1 ICSP connector
- 1 revised and corrected reset circuit
Add to Wishlist
Add to Wishlist
- Supply Voltage 11-18V
- Compatible Lithium battery: 1-6Cells
- Lithium iron battery 1-6Cells
- NICD / NIMH 1-15Cells
- Maximum charge power 80W
Add to Wishlist
Add to Wishlist
- Microcontroller: 64 MHz Arm® Cortex M4 (nRF52832)
- Connectivity: Bluetooth® 4.2
- Interface: USB interface with debug functionality
- Tiny size, packed with features
- Low power consumption
- Add sensing capabilities to existing projects
- Weight: 2g
Add to Wishlist
Add to Wishlist
- MICROCONTROLLER: SAMD21 Cortex-M0+ 32bit low power ARM MCU
- This Arduino MKR1000 WIFI without headers
- 5V board power supply
- Supports Li-Po cell, 3.7V, 700mAh minimum
- 8 digital I/O pins
Add to Wishlist
Add to Wishlist
- Compact, easy-to-use charger
- Suitable for 2S-4S LiPo cells and 6-8 NiMH cells.
- Connects directly to the wall outlet at a voltage range of 100 V to 240 V
- Suitable for LiPo and NiMH batteries
- Charge status indicator
Add to Wishlist
Add to Wishlist
- Intuitive Operation Interface
- LCD Display: for real-time charging data at a glance! During the charging process,
- High Performance with Dual Channels: With maximum charging power of 1500W.
- Compatibility of CAN: PC1500 charger is with built-industry CAN Bus communication. Smart batteries and lithium batteries with balance ports can be charged.
- Better Protection with Conformal Coating: Anti-corrosion paint is applied to protect the key circuit’s electronic components from extreme environments like moisture, mildew, and smoke corrosion. The charger’s reliability and stability are ensured for outdoor work.
Add to Wishlist
Add to Wishlist
- Supports 6s LiPo battery Adjustable charge current from 1.0 to 20.0A
- The charger can store the charge current of the last charge program
- LED digits on indicate charge/discharge status
- Two working modes: balance charge mode and storage mode
Add to Wishlist
Add to Wishlist
- Chip: ATMEGA4809
- Clock Speed: 20MHz
- Memory: 48KB
- Interface: USB, SPI, 12C, UART
- USB Vin: 5V
- Input VIN : 6-21V
- Operating Voltage: 5V
- I/O PINS: Digital PIN 14, PWM 5, Analog 8
- Dimensions: 18x45mm
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000