- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- FPGA: Intel® Cyclone® 10CL016
- PCI: Mini PCI Express port with programmable pins
- Camera Connector: MIPI camera connector
- Microcontroller: SAMD21 Cortex®-M0+ 32bit low power ARM MCU
- Radio module: u-Blox NINA-W102 (datasheet)
- Board Power Supply :(USB/VIN) 5V
- All pins are PWM pins
- MIPI camera connector
- Mini PCI Express port with programmable pins
- Full-Speed USB Device and embedded Host
Add to Wishlist
Add to Wishlist
- Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU
- Board Power Supply (USB/VIN): 5V
- Supported Battery(*): Li-Po single cell, 3.7V, 700mAh minimum
- DC Current for 3.3V Pin: 600mA
- Comes with a micro SD card holder
Add to Wishlist
Add to Wishlist
- Processor: STM8
- Operating Voltage (VDC):10 ~ 24
- Working humidity range:-20 to 60
- Dimension:65x25x15.6 mm
Add to Wishlist
Add to Wishlist
- Fast Data Output Capability
- High Sample Rates
- Robust Motion Artifact Resilience
- High SNR
- -40°C to +85°C Operating Temperature Range
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V-5V
- Operating Current: <60mA
- Communication: I2C
- Storage Capacity: 80 fingerprints
Add to Wishlist
Add to Wishlist
- Grove Compatible
- 3.5mm Connector
- Power supply voltage: 3.3V-5V
- 1000mm Cable Leads
Add to Wishlist
Add to Wishlist
- LED peak wavelength: 660nm/880nm
- LED power supply voltage: 3.3~5V
- Detection signal type: light reflection signal (PPG)
- Output signal interface: I2C interface
Add to Wishlist
Add to Wishlist
- Shorter Time-To-Market
- Give new life to existing products
- Add connectivity for monitoring and control
- Tailor it to your need, each I/O pin can be configured
- Make equipment smarter to be ready for the AI revolution
Add to Wishlist
Add to Wishlist
- Microcontroller: ATmega328P
- Circuit operating voltage: 5V
- The input voltage ranges from 6v to 20V
- Digital I/O Pins: 14
- Analog i/p pins are 6.
- 1 kb of EEPROM memory
- USB connector: USB-C
Add to Wishlist
Add to Wishlist
- ATmega32U4 Microcontroller
- Input Voltage: 7-12V
- 20 Digital I/O Pins
- micro USB connection
Add to Wishlist
Add to Wishlist
- 14 digital inputs/outputs, including 6 PWM inputs
- 6 analog inputs
- 1 ICSP connector
- 1 revised and corrected reset circuit
Add to Wishlist
Add to Wishlist
- Microcontroller: 64 MHz Arm® Cortex M4 (nRF52832)
- Connectivity: Bluetooth® 4.2
- Interface: USB interface with debug functionality
- Tiny size, packed with features
- Low power consumption
- Add sensing capabilities to existing projects
- Weight: 2g
Add to Wishlist
Add to Wishlist
- Dynamic current : <40mA
- Operating voltage: 3.3-5V
- Encryption key : 64-bit encryption
- Image collecting rate : 20fps
- Matching time : 0.5s
- Greyscale: 256 (8-bit)
- Fingerprint capacity: 3000
Add to Wishlist
Add to Wishlist
- MICROCONTROLLER: SAMD21 Cortex-M0+ 32bit low power ARM MCU
- This Arduino MKR1000 WIFI without headers
- 5V board power supply
- Supports Li-Po cell, 3.7V, 700mAh minimum
- 8 digital I/O pins
Add to Wishlist
Add to Wishlist
- Operating voltage: 5V
- Operating current: 135mA (scanning), 58mA (standby), 2mA (sleep)
- Operating temperature: 0°C~60°C
- Operating humidity: 5%~95% (Non-condensing)
- Communication interface: UART, USB
Add to Wishlist
Add to Wishlist
- Power Supply: 3.3V
- Working Current: <15mA
- Communication: I2C/UART
- I2C Address: 0x57
- Operating Temperature Range: -40℃~85℃
- Dimension: 18 x 22mm/0.71 x 0.87″
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000