- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Charges batteries in pairs.
- Charge time 0.75 up to 4 hours.
- 240 minutes.
- Charging indicators.
- Bad cell detection.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V / 5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 42mm × 27mm
- Display size: 21.76mm × 14mm
- Dot pitch: 0.175 × 0.17
- Resolution: 128 × 80
- Display color: black, white
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI control interface, for working with host boards such as Raspberry Pi/Jetson Nano/Arduino.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Dot pitch: 0.181 × 0.181
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Display color: ACep 7-Color
- Interface: 3-wire SPI, 4-wire SPI
- Crey scale: 2
- Display size: 86.40 × 54.00mm
- Dot pitch: 0.135 × 0.135mm
- Resolution: 640 × 400 pixels
- Advanced Color ePaper (ACeP) technology, supports a 7-Color display
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Add to Wishlist
Add to Wishlist
- Power: NFC-powered
- Resolution: 400×300
- Dot pitch: 0x212x 0x212
- Refresh time: 4s
- No backlight required, e-Paper keep displaying the last content for a long time without power
- No power adapter required
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V
- Gray Scale: 2
- Interface: 3-wire SPI, 4-wire
- SPI Partial Refresh Time: 0.3s
- Full Refresh Time: 2s
- Refresh Power: 26.4mW(Typ.)
- Dot Pitch : 0.194 x0.194mm
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- Operating temperature 0~40℃
- Storage temperature -25~60℃
- Humidity range 40~70%RH
- Display resolution 152(H) x 152(V) pixel
Add to Wishlist
Add to Wishlist
- AC Input Voltage:100-240V 50/60Hz
- Output Voltage:12V/24V
- Output Current:12V10A&24V5A
- Output Volt under No Load:27.6V
- Minimum Start Volt: >9.0V
- Input Power with Load: MAX.120W
- Input Power under no Load:2.8W
- Dimension:158x90x50mm
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- On-chip display RA
- DPI 111
- Interface UART
- Baud rate with Arduino 230400
Add to Wishlist
Add to Wishlist
Case Material: Plastic
Case Size:112x75x38mm
Weight:357.7g
Add to Wishlist
Add to Wishlist
- Supply Voltage 11-18V
- Compatible Lithium battery: 1-6Cells
- Lithium iron battery 1-6Cells
- NICD / NIMH 1-15Cells
- Maximum charge power 80W
Add to Wishlist
Add to Wishlist
- Best-in-class all-around performance
- Confident driving in all weather conditions
- Visual Alignment Indicators
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V
- Interface: 3-wire SPI, 4-wire SPI
- Display size: 84.8mm × 63.6mm
- Dot pitch: 0.212 × 0.212
- Resolution: 400 × 300
Add to Wishlist
Add to Wishlist
- Compact, easy-to-use charger
- Suitable for 2S-4S LiPo cells and 6-8 NiMH cells.
- Connects directly to the wall outlet at a voltage range of 100 V to 240 V
- Suitable for LiPo and NiMH batteries
- Charge status indicator
Add to Wishlist
Add to Wishlist
- Intuitive Operation Interface
- LCD Display: for real-time charging data at a glance! During the charging process,
- High Performance with Dual Channels: With maximum charging power of 1500W.
- Compatibility of CAN: PC1500 charger is with built-industry CAN Bus communication. Smart batteries and lithium batteries with balance ports can be charged.
- Better Protection with Conformal Coating: Anti-corrosion paint is applied to protect the key circuit’s electronic components from extreme environments like moisture, mildew, and smoke corrosion. The charger’s reliability and stability are ensured for outdoor work.
Add to Wishlist
Add to Wishlist
- Supports 6s LiPo battery Adjustable charge current from 1.0 to 20.0A
- The charger can store the charge current of the last charge program
- LED digits on indicate charge/discharge status
- Two working modes: balance charge mode and storage mode
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000