Shop
LattePanda Alpha 864s – Tiny Ultimate Windows / Linux Device
Out of stock
₹73,141.11 – ₹83,114.89 (Including tax) Whatsapp Inquiry
T-motor CubeMars AK10-9 V1.1 100KV Brushless DC Actuator Robot Joint Motor
Out of stock
₹72,790.02 – ₹82,715.93 (Including tax) Whatsapp Inquiry
SKYRC PC3000H 3000W 60A 12/14S LiPo/LiHV Quattro Battery Charger
Out of stock
₹71,648.41 – ₹81,418.65 (Including tax)| Battery |
Type：Lithium Battery LiPo Battery Cells：12S/14S (4.2V) LiHV Battery Cells：12S/14S (4.35V) |
|---|---|
| At AC 220V |
Fast Charge Current: max. 60A single channel Standard Charge Current: max. 30A single channel ,max. 60A Dual channels in total Slow Charge Current: max. 20A single channel; max. 60A multi channels in total |
| At AC 120V |
Fast Charge Current: max. 1200W single channel Slow Charge Current: max. 20A single channel; max. 1200W multi-channels in total |
| Storage Discharge Power |
Main Port: 50W Max. Balance Port: 80W Max. (The current will be adjusted based on the balance port’s temp) |
| Max Charge Output Power |
AC220V Output Power: 3000W AC120V Output Power: 1200W |
| Discharge Power |
60W |
| Charging Mode |
Fast charge /Standard Charge/ Charge / Storage |
| Working Temperature Range (°C) |
0℃-40℃ |
| Working Humidity Range |
0%-75% |
| Storage Temperature |
-10℃-70℃ |
| Storage Humidity |
0%-75% |
FlySky PL18 EV Paladin EV 2.4GHz AFHDS 3 Transmitter with FGr8B and FGr12B Receiver-Flagship Version
Out of stock
₹68,431.34 – ₹77,762.89 (Including tax)| Hardware Highlights: |
1. Rocker type: 5D Hall waterproof rocker + 2 levers 2. The third rocker: one on the left and one longitudinal centering lever 3. Other controls: 6 gear switches (the length of the gear is not the same as the reset ,accessories can be modified) + 3 knob keys + 2 self-locking buttons + 8 fine-tuning buttons (two-way buttons) 4. Display screen: 3.5-inch TFT color screen ,320*480 dot matrix ,LCD white backlight ,capacitive touch screen 5. Vibration/sound alarm: adjustable vibration intensity + different alarm sounds and real voice ic alarm and prompt sound 6. Other accessories: Only the flagship version comes with a bracket with hand rest + shoulder strap 7. Charging: Support Mirco USB and QI wireless charging 8. Battery: Built-in 4300mAh high-capacity lithium battery |
|---|---|
| Software Highlights: |
1. Number of channels: 18 ratio channels 2. Dual model control: support 3. Data backup and setting sharing and storage capacity: Fusi remote control butler realizes model data backup and sharing. The remote control can store 20 sets of models 4. Upgrade: USB connected to the computer through the Fusi remote control butler ,software network upgrade 5. Additional functions: timer ,logic switch ,simulator 6. Custom function + control All channels can be customized function + custom allocation control and fine-tuning 7. Unique model function: double ratio curve + delay function + 20 groups of customizable mixing control + track mixing control function |
NVIDIA Jetson Xavier NX Module
Out of stock
₹66,871.77 – ₹75,990.65 (Including tax)| GPU |
NVIDIA Volta architecture with 384 NVIDIA CUDA® cores and 48 Tensor cores |
|---|---|
| Max GPU Frequency(MHz) |
1100 |
| CPU |
6-core NVIDIA Carmel ARM®v8.2 64-bit CPU 6 MB L2 + 4 MB L3 |
| Max CPU Frequency(MHz) |
1900 |
| Memory |
8 GB 128-bit LPDDR4x @ 51.2GB/s |
| Storage |
16 GB eMMC 5.1 |
| Video Encode |
2x 4K @ 30 ,6x 1080p @ 60 ,14x 1080p @ 30 (H.265/H.264) |
| Video Decode |
2x 4K @ 60 ,4x 4K @ 30 ,12x 1080p @ 60 ,32x 1080p @ 30 (H.265) 2x 4K @ 30 ,6x 1080p @ 60 ,16x 1080p @ 30 (H.264) |
| Display |
2 multi-mode DP 1.4/eDP 1.4/HDMI 2.0 |
| DLA Max Frequency(MHz) |
1100 |
| USB |
1xUSB 3.1 (10 Gbps) ,3xUSB 2.0 |
| Connector |
60 pin SO-DIMM connector |
| Length (mm) |
70 |
| Width (mm) |
45 |
| Weight (gm) |
170 |
YDLIDAR TG30 Lidar – 360-degree Laser Range Scanner (30m)
Out of stock
₹66,275.88 – ₹75,313.50 (Including tax)| Ranging Resolution (cm) |
4 |
|---|---|
| Ranging Frequency |
20000 Hz |
| Motor Frequency |
5-15 Hz |
| Ranging Distance |
0.05-30 m |
| Scanning angle |
360 |
| Maximum Supply Voltage (V) |
5.2 V |
| Working Current(uA) |
400-480 mA |
| Interface |
VCC ,GND ,NC ,Tx ,Rx |
| UART Baudrate |
512000 |
| Operating Temperature Range (°C) |
-10 to 50 |
| Laser wavelength |
895-915 nm |
| Laser power |
85W |
T Motor U15Ⅱ KV100 BLDC drone motor
Out of stock
₹66,096.76 – ₹75,109.96 (Including tax) Whatsapp Inquiry
EFT E616P 16L 6 Axis Agricultural Drone Frame
Out of stock
₹66,037.04 – ₹75,042.10 (Including tax)| Model |
EFT E616P 16L 6 Axis |
|---|---|
| Motor |
X8、8118 |
| Propeller |
28-32inch |
| ESC |
80A FOC |
| Supply voltage |
12S |
| Maximum take-off weight |
36kg |
| Wheelbase |
1628mm |
| Opening size |
1720 x 1500 x 556mm |
| Folding size |
1073 x 956 x 546mm |
| Tank capacity |
16L |
| Frame weight |
7kg |
CR-Scan 01 Creality 3D Scanner (Upgraded)
Out of stock
₹65,678.80 – ₹74,635.00 (Including tax)| Single Frame Scan Range |
536 x 378 |
|---|---|
| Accuracy |
0.1mm |
| Scan resolution |
0.5 mm |
| Frame Rate |
10/s |
| Operating Distance |
400-500 mm |
| Single Frame Scan Area |
536 x 378 mm |
| Hand-held |
Yes (with optional tripod stand) |
| Color in scans |
Yes |
| Interface |
USB 3.0 port |
| Compatible software |
Creality CR Studio |
| Compatible output formats |
STL ,OBJ |
| Min. Computer Configuration Required |
8GB RAM ,2GB Graphic Card Memory |
| Operating Temperature (°C) |
0～40℃ |
| Length (mm) |
240 |
| Width (mm) |
75 |
| Height (mm) |
45 |
| Weight (gm) |
500 |
Creality CP-01 3in1 3D Printing+CNC Cutting+Laser Engraving Machine
Out of stock
₹65,677.61 – ₹74,633.65 (Including tax)| Recommended Power Supply |
Input:115/230 V ,Output:24 V |
|---|---|
| Working Mode |
TF card offline Printing |
| Operating System |
Windows XP/VISTA/7/10/ MAC |
| Molding Technology |
FDM |
| Hotbed Temperature |
≤100 Degree Celcius |
| Nozzle Diameter (mm) |
Standerd 0.4 ,can be 0.6 ,0.8 |
| Printing Size(mm) |
200x200x200 |
| 3D Printing |
Molding Technology: FDM fused deposition molding Molding Size: 200x200x200mm File Format: STL ,OBJ ,AMF Supporting Material: 1.75mm diameter PLA ,ABS ,TPU ,PVA Nozzle Diameter: Standard 0.4 mm ,can be in 0.6 mm ,0.8 mm ,1.0mm ,1.2 mm Hot Bed Temperature: ≤100°C |
| CNC Cutting |
Working Size: 200x200mm Support Materials: wood ,paper ,PCB ,plastic ,etc File Format: JPG ,JPEG Spindle Speed: 4800 rpm max Standard Cutter Size: Tungsten Alloy Milling Cutter |
| Laser Engraving |
Working Size: 200x200mm Support Materials: wood ,paper ,plastic ,leather ,etc File Format: JPG ,JPEG Laser Power: less than 0.5w |
SKYRC PC2500 2500W 45A 12/14S LiPo/LiHV Quattro Battery Charger
Out of stock
₹65,677.61 – ₹74,633.65 (Including tax)| Recommended Power Supply |
AC Input: 100-240V Charging Power: AC220V：2500W AC120V：1200W |
|---|---|
| Battery Type |
Type：Lithium Battery LiPo Battery Cells： 12S/14S LiHV Battery Cells：12S |
| Charge/Discharge |
AC 220V Fast Charge Current: max. 45A single channel Slow Charge Current: max. 20A single channel; max. 45A multi channels in total |
| At AC120 |
Fast Charge Current: max. 1200W single channel Slow Charge Current: max. 20A single channel; max. 1200W multi channels in total |
| Storage Discharge Power |
Main Port: 75W Max. Balance Port: 80W Max. (The current will be adjusted based on the balance port’s temp) |
| Max Charge Output Power |
AC220V Output Power: 2500W AC120V Output Power: 1200W |
| Discharge Power |
60W |
| Charging Mode |
Fast Charge ,Slow ,Storage |
| Working Temperature |
0℃-40℃ |
| Working Humidity |
0%-75% |
| Storage Temperature |
10℃-70℃ |
Creality Ender 7
Out of stock
₹63,301.23 – ₹71,933.21 (Including tax)| Molding Technology |
FDM |
|---|---|
| Input Voltage (V) |
100-240 AC |
| Output Voltage(V) |
24 |
| Maximum Power (W) |
350 |
| Nozzle Quantity |
1 Piece |
| Supported Printing Material |
PLA ,TPU |
| Software |
Creality/Cura/Repetier-Host/Simplify3D |
| Hotbed temperature(℃) |
≤ 100 |
| Nozzle temperature(℃) |
≤ 260 |
| Nozzle Diameter(mm) |
0.4 |
| Printing precision(mm) |
±0.1 |
| Printing size(mm) |
250 × 250 × 300 |