- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
-
- Factory calibrated, accurate measurement
- High sensitivity, low power consumption
- Excellent stability and anti-interference
- Three output modes: I2C, UART and analog
- Detection Gas: Hydrogen (H2)
- Working Voltage: 3.3~5.5V DC
- Working Current: <5mA
Add to Wishlist
Add to Wishlist
- Brand: DFRobot
- Product: Gravity Industrial Grade Analog ORP Sensor Meter PRO
- Input Voltage: 5V
- Input Signal: 0.5V – 4.5V
- Input Interface: 5.08mm/0.20″ Pluggable Connector
- Measuring Range: -2000mV ~ +2000mV
Add to Wishlist
Add to Wishlist
- Product: Thermopile Sensor, Infrared, TO-18, CO2 Gas Detection
- Rise Time: 22 ± 5
- Ambient Temperature Sensor: Ni-RTD
- Ambient Temperature Sensor Resistance: 1000 ± 4
Add to Wishlist
Add to Wishlist
- Detectable gases: methane
- Maximum concentration: 5% v/v.
- Sensor sensitivity: >10 mV/% CH4
- Sensor response time: <30 s
- Zero drift: <0.1%v/v
Add to Wishlist
Add to Wishlist
- Product: DFRobot Indoor ENS160 Air Quality Sensor – I2C
- Supply Voltage: 3.3V~5V
- Operating Current: 29mA
- Preheat Time: <3 minutes
- Communication Mode: I2C
- I2C Address: 0x53
Add to Wishlist
Add to Wishlist
- Product: Seeed Studio Grove – Air Quality Sensor(BME688) with built-in AI, High-Performance 4-in-1, Gas,Humidity, Pressure and Temperature sensor
- High Accuracy
- Thermistor: NCP18WF104F03RC (NTC)
- Grove compatible interface
- Easy to use
Add to Wishlist
Add to Wishlist
- Product: Fluorescent oxygen sensor AOX4000
- Working Voltage (V): 4.75~5.25
- Oxygen Concentration Range: 0~25%
- Oxygen Partial Pressure Range: 0~300m bar
Add to Wishlist
Add to Wishlist
- Product: Lead-free oxygen sensor AOX3000
- Output Current(mA): 0.10±0.03
- Zero Current: <1.2% vol.O2
- Response Time(T90): <15 s
Add to Wishlist
Add to Wishlist
- Product: Hydrogen sulfide sensor AHS3000
- Sensitivity (nA/ppm): 700±150
- Working Humidity Range: 15~90%RH (Non-Condensing)
- Working Pressure Range : 1atm±10%
Add to Wishlist
Add to Wishlist
- Product: AMS2106 Digital Display Gas Mass Flow Meter -200L/min
- Measure Range: 0~200L/min(standard)Customizable with different ranges
- Accuracy: ±3%FS
- Repeatability: 0.5%F.S.
Add to Wishlist
Add to Wishlist
- Product: Figaro NGM2611-E13 Methane Sensor Module factory calibrated
- Operating conditions: 0˚~40˚C, 30~95%RH
- Circuit current: 10mA (max)
- Reference voltage: 1.0~4.0V DC (NOTE 2)
Add to Wishlist
Add to Wishlist
- Product: Figaro TGS2602 Air Quality / VOC Sensor
- Heater Voltage: 5.0±0.2V DC
- Circuit Voltage: 5.0±0.2V DC
- Heater power consumption: 280mW (typical)
- Heater Current: 56±5mA
Add to Wishlist
Add to Wishlist
- Product: Figaro TGS3870 Methane/Carbon Monoxide Sensor
- Circuit Voltage: 5.0±0.2V DC pulse
- Load Resistance: variable (>0.75kΩ)
- Sensing Principle: MOS type
- Sensor Resistance: 0.3kΩ~5.0kΩ in 3000ppm methane ,2kΩ~40kΩ in 200ppm CO
Add to Wishlist
Add to Wishlist
- Product: Figaro TGS5042-A00 Carbon Monoxide Sensor Industrial safety
- Target Gases: Carbon monoxide
- Typical detection range: 0 ~ 10,000ppm
- Output current in CO: 1.2~2.4nA/ppm
- Baseline offset(*1): <±10ppm equivalent
Add to Wishlist
Add to Wishlist
- Product: Figaro CMM 5042 Embedded Module for Carbon Monoxide
- Gas sensor: TGS5042 (electrochemical)
- Detection range: 0 ~ 800ppm CO
- Current consumption: ≤ 5mA
Add to Wishlist
Add to Wishlist
- Model No.: TGS6812-D00
- Heater Current: 175mA (typical)
- Heater power consumption:
- Target Gases: Hydrogen, methane, iso-butane
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000