Sku: rz24319021
Categories: Gas and Dust Sensor
10,000ppm MH-Z16 NDIR CO2 Sensor
Whatsapp InquiryRated 0 out of 5
0 Reviews- Operating voltage: 4.5 V to 6 V DC
- Measurement of the range from 0-2000 parts per million (PPM)
- Resolution of 1 PPM 0-2000 parts per million (PPM)
- Accuracy of 200 PPM
- A warm – Operating time 3 minutes
- Response time <90s
- Operating voltage: 4.5 V to 6 V DC
- Measurement of the range from 0-2000 parts per million (PPM)
- Resolution of 1 PPM 0-2000 parts per million (PPM)
- Accuracy of 200 PPM
- A warm – Operating time 3 minutes
- Response time <90s
Sku: rz24317169
Categories: Gas and Dust Sensor
ACD10 infrared carbon dioxide sensor
Whatsapp InquiryRated 0 out of 5
0 Reviews- Operating Voltage 4.75-5.25V
- Working Current Average current<45mA
- Typical Power 225mW@5V
- Fully calibrated
- Standard digital output
- Excellent long-term stability
- Operating Voltage 4.75-5.25V
- Working Current Average current<45mA
- Typical Power 225mW@5V
- Fully calibrated
- Standard digital output
- Excellent long-term stability
Sku: rz24312879
Categories: Gas and Dust Sensor
ACM2000 Carbon Monoxide Sensor
Whatsapp InquiryRated 0 out of 5
0 Reviews- Measurement range: 0~500 ppm
- Maximum overload: 1000 ppm
- Sensitivity: > 15 nA/ppm
- Response time: T90 ≤ 45 s (0 to 50 ppm)
- Measurement range: 0~500 ppm
- Maximum overload: 1000 ppm
- Sensitivity: > 15 nA/ppm
- Response time: T90 ≤ 45 s (0 to 50 ppm)
Sku: rz24314049
Categories: Gas and Dust Sensor
Adafruit SGP30 Air Quality Sensor Breakout – VOC and eCO2 – STEMMA QT / QwiicRoHS Compliant
Whatsapp InquiryRated 0 out of 5
0 Reviews- Easy to use
- Color: Black
- SCL – I2C clock pin
- SDA – I2C data pin
- Power Pins: Vin
- Voltage: 3.3V
- Easy to use
- Color: Black
- SCL – I2C clock pin
- SDA – I2C data pin
- Power Pins: Vin
- Voltage: 3.3V
Sku: rz24310812
Categories: Gas and Dust Sensor
AMPHENOL ADVANCED SENSORS Gas Detection Sensor Carbon Dioxide 2000 ppm, 3 %, Non-dispersive Infrared (NDIR)
Whatsapp InquiryRated 0 out of 5
0 Reviews- Measurement Range: 0 to 5000 ppm
- Dimensions: 30mm x 15.6mm x 8.6mm
- Accuracy: 400-5000 ppm +/- 30 ppm ± 3% of reading
- Temperature Dependence: 5 ppm per °C or 0.5% of the reading per °C,
- Stability: < 2% of FS over life of sensor (15 years typical)
- Measurement Range: 0 to 5000 ppm
- Dimensions: 30mm x 15.6mm x 8.6mm
- Accuracy: 400-5000 ppm +/- 30 ppm ± 3% of reading
- Temperature Dependence: 5 ppm per °C or 0.5% of the reading per °C,
- Stability: < 2% of FS over life of sensor (15 years typical)
Sku: rz24315855
Categories: Gas and Dust Sensor
AMPHENOL SGX MICS-VZ-89TE.INTEGRATED SENSOR BOARD, 3.3VDC, 0.125W
Whatsapp InquiryRated 0 out of 5
0 Reviews- Calibration-free
- Low power
- Wide VOCs detection range
- High sensitivity
- High resistance to shocks and vibrations
- Calibration-free
- Low power
- Wide VOCs detection range
- High sensitivity
- High resistance to shocks and vibrations
Sku: rz24310707
Categories: Gas and Dust Sensor
AMPHENOL SGX SENSORTECH Gas Detection Sensor
Whatsapp InquiryRated 0 out of 5
0 Reviews- Calibration–free
- Supply Voltage: 3.3V DC regulated +/– 5%
- Low power
- Wide VOCs detection range
- High sensitivity
- Calibration–free
- Supply Voltage: 3.3V DC regulated +/– 5%
- Low power
- Wide VOCs detection range
- High sensitivity
Sku: rz24310724
Categories: Gas and Dust Sensor
AMPHENOL SGX SENSORTECH Gas Detection Sensor, Ammonia, Carbon Monoxide, Ethanol, Hydrogen, Methane, 10-1000 ppm
Whatsapp InquiryRated 0 out of 5
0 Reviews- Maximum heater power dissipation: 88mW
- Carbon monoxide CO 1 – 1000ppm
- Ethanol C2H5OH 10 – 500ppm
- Hydrogen H2 1 – 1000ppm
- Ammonia NH3 1 – 500ppm
- Methane CH4 >1000ppm
- Maximum heater power dissipation: 88mW
- Carbon monoxide CO 1 – 1000ppm
- Ethanol C2H5OH 10 – 500ppm
- Hydrogen H2 1 – 1000ppm
- Ammonia NH3 1 – 500ppm
- Methane CH4 >1000ppm
Sku: rz24311047
Categories: Gas and Dust Sensor
AMPHENOL SGX SENSORTECH Gas Detection Sensor, Ammonia, Carbon Monoxide, Ethanol, Hydrogen, Methane, Nitrogen Dioxide
Whatsapp InquiryRated 0 out of 5
0 Reviews- Smallest footprint for compact designs (5 x 7 x 1.55 mm)
- Robust MEMS sensor for harsh environments
- High-volume manufacturing for low-cost applications
- Smallest footprint for compact designs (5 x 7 x 1.55 mm)
- Robust MEMS sensor for harsh environments
- High-volume manufacturing for low-cost applications
Sku: rz24310667
Categories: Gas and Dust Sensor
AMPHENOL SGX SENSORTECH Gas Detection Sensor, Ammonia, Ethanol, Hydrogen, Propane, Iso-butane, 300 ppm
Whatsapp InquiryRated 0 out of 5
0 Reviews- Maximum heater power dissipation: 88mW
- Carbon monoxide CO 1 – 300 ppm
- Ethanol C2H5OH 10 – 300 ppm
- Hydrogen H2 1 – 300 ppm
- Ammonia NH3 1 – 300 ppm
- Methane CH4 >300 ppm
- Maximum heater power dissipation: 88mW
- Carbon monoxide CO 1 – 300 ppm
- Ethanol C2H5OH 10 – 300 ppm
- Hydrogen H2 1 – 300 ppm
- Ammonia NH3 1 – 300 ppm
- Methane CH4 >300 ppm
Sku: rz2439309
Categories: Gas and Dust Sensor
Amphenol SGX Sensortech Gas Sensor Module, Methane
Whatsapp InquiryRated 0 out of 5
0 Reviews- Detectable gases: methane
- Maximum concentration: 5% v/v.
- Sensor sensitivity: >10 mV/% CH4
- Sensor response time: <30 s
- Zero drift: <0.1%v/v
- Detectable gases: methane
- Maximum concentration: 5% v/v.
- Sensor sensitivity: >10 mV/% CH4
- Sensor response time: <30 s
- Zero drift: <0.1%v/v
Sku: rz2436537
Categories: Gas and Dust Sensor
AMS2106 Digital Display Gas Mass Flow Meter -200L/min
Whatsapp InquiryRated 0 out of 5
0 Reviews- Product: AMS2106 Digital Display Gas Mass Flow Meter -200L/min
- Measure Range: 0~200L/min(standard)Customizable with different ranges
- Accuracy: ±3%FS
- Repeatability: 0.5%F.S.
- Product: AMS2106 Digital Display Gas Mass Flow Meter -200L/min
- Measure Range: 0~200L/min(standard)Customizable with different ranges
- Accuracy: ±3%FS
- Repeatability: 0.5%F.S.
Sku: rz24313998
Categories: Gas and Dust Sensor
AO-07 Oxygen Sensor
Whatsapp InquiryRated 0 out of 5
0 Reviews- Output 9 mV to 13 mV in 21%O²
- Measurement Range 0 – 100 Vol.% O²
- Response Time <15 s
- Temperature compensation
- Excellent signal stability
- Long-lasting
- Output 9 mV to 13 mV in 21%O²
- Measurement Range 0 – 100 Vol.% O²
- Response Time <15 s
- Temperature compensation
- Excellent signal stability
- Long-lasting
Sku: rz24314000
AO-08 Medical Oxygen Sensor
Whatsapp InquiryRated 0 out of 5
0 Reviews- Output 9 mV to 13 mV in 21%O²
- Measurement Range 0 – 100 Vol.% O²
- Response Time <15 s
- Excellent signal stability
- Accurate and reliable
- No external power supply
- Output 9 mV to 13 mV in 21%O²
- Measurement Range 0 – 100 Vol.% O²
- Response Time <15 s
- Excellent signal stability
- Accurate and reliable
- No external power supply
Sku: rz24312878
Categories: Gas and Dust Sensor
AO-09 Oxygen sensor
Whatsapp InquiryRated 0 out of 5
0 Reviews- Operating Principle: Partial pressure electrochemical
- Output: 9 mV to 13 mV in 210 mBar O2
- Measurement Range: 0 – 100 Vol.% O2
- Response Time: (T 90 ) <15 s
- Operating Principle: Partial pressure electrochemical
- Output: 9 mV to 13 mV in 210 mBar O2
- Measurement Range: 0 – 100 Vol.% O2
- Response Time: (T 90 ) <15 s
Sku: rz24312833
Categories: Gas and Dust Sensor
APM10 Laser Particle Detection Sensor
Whatsapp InquiryRated 0 out of 5
0 Reviews- Prodduct: digital particle detection sensor
- Particle size: 0.3-2.5-10 µm
- Particle concentration: 0 – 1000 µ/gm³
- Supply voltage: 5.25V
- Operating Current: 100mA
- Prodduct: digital particle detection sensor
- Particle size: 0.3-2.5-10 µm
- Particle concentration: 0 – 1000 µ/gm³
- Supply voltage: 5.25V
- Operating Current: 100mA
Sku: rz24316618
Categories: Gas and Dust Sensor
DF Robot Gravity PH3 Sensor (Calibrated) – I2C & UART
Whatsapp InquiryRated 0 out of 5
0 Reviews- Detection Gas: CO, O2, NH3, H2S, NO2, HCL, H2, PH3, SO2, O3, CL2, HF(Need to change different probe).
- Working Voltage: 3.3~5.5V DC.
- Working Current: <5mA.
- Output Signal: I2C, UART output (0~3V), analog voltage (see the characteristic parameters of specific probe).
- Working Temperature: -20~50℃.
- Detection Gas: CO, O2, NH3, H2S, NO2, HCL, H2, PH3, SO2, O3, CL2, HF(Need to change different probe).
- Working Voltage: 3.3~5.5V DC.
- Working Current: <5mA.
- Output Signal: I2C, UART output (0~3V), analog voltage (see the characteristic parameters of specific probe).
- Working Temperature: -20~50℃.
Sku: rz2436117
Categories: Gas and Dust Sensor
DFRobot Air Quality Monitor (PM 2.5, Formaldehyde, Temperature & Humidity Sensor)
Whatsapp InquiryRated 0 out of 5
0 Reviews- Product: DFRobot Air Quality Monitor (PM 2.5, Formaldehyde, Temperature & Humidity Sensor)
- DC Supply Voltage: Typ: 5V Min: 4.5V Max: 5.5V
- Working Current: ≤100mA
- Single Response Time: <1s
- Particle Counting Efficiency: 50%@0.3μm, 98%@>=0.5μm
- Product: DFRobot Air Quality Monitor (PM 2.5, Formaldehyde, Temperature & Humidity Sensor)
- DC Supply Voltage: Typ: 5V Min: 4.5V Max: 5.5V
- Working Current: ≤100mA
- Single Response Time: <1s
- Particle Counting Efficiency: 50%@0.3μm, 98%@>=0.5μm
Sku: rz24314342
Categories: Gas and Dust Sensor
DFRobot Fermion: ENS160 Air Quality Sensor (Breakout)
Whatsapp InquiryRated 0 out of 5
0 Reviews- Multiple IAQ outputs (TVOC, eCO2, AQI), various environmental data
- Less than 3 minutes warm-up time, get data faster
- Built-in algorithm, more accurate output
- Automatic baseline correction, more stable for long-term use
- Multiple IAQ outputs (TVOC, eCO2, AQI), various environmental data
- Less than 3 minutes warm-up time, get data faster
- Built-in algorithm, more accurate output
- Automatic baseline correction, more stable for long-term use
Sku: rz24318266
Categories: Gas and Dust Sensor
DFRobot Fermion: MEMS Gas Sensor – MiCS-2714 (Breakout)
Whatsapp InquiryRated 0 out of 5
0 Reviews- Operating voltage: 4.9~5.1V DC
- Power dissipation: 0.45W
- Output signal: Analog quantity
- Measuring range:1 – 1000ppm(Hydrogen H2) ,0.05 – 10ppm(Nitrogen dioxide NO2 )
- Working temperature: -30~85℃
- Working humidity: 5~95%RH (No condensation)
- Storage temperature: -40~85℃
- Lifespan: >2 years(in the air)
- Operating voltage: 4.9~5.1V DC
- Power dissipation: 0.45W
- Output signal: Analog quantity
- Measuring range:1 – 1000ppm(Hydrogen H2) ,0.05 – 10ppm(Nitrogen dioxide NO2 )
- Working temperature: -30~85℃
- Working humidity: 5~95%RH (No condensation)
- Storage temperature: -40~85℃
- Lifespan: >2 years(in the air)
Sku: rz24318255
Categories: Gas and Dust Sensor
DFRobot Fermion: MEMS Gas Sensor – MiCS-5524 (Breakout)
Whatsapp InquiryRated 0 out of 5
0 Reviews- Detection of Physical Quantities: Gas concentration or gas leakage of NO, NO2, H2
- Operating voltage: 4.9 ~ 5.1 V DC
- Power dissipation: 0.45 W
- Output signal: Analog quantity
- Working temperature: -30 ~ 85 °C
- Working humidity: 5 ~ 95%RH (No condensation)
- Storage temperature: -40 ~ 85 °C
- Lifespan: >2 years (in the air)
- Detection of Physical Quantities: Gas concentration or gas leakage of NO, NO2, H2
- Operating voltage: 4.9 ~ 5.1 V DC
- Power dissipation: 0.45 W
- Output signal: Analog quantity
- Working temperature: -30 ~ 85 °C
- Working humidity: 5 ~ 95%RH (No condensation)
- Storage temperature: -40 ~ 85 °C
- Lifespan: >2 years (in the air)
Sku: rz24315489
Categories: Gas and Dust Sensor
DFRobot Gravity Air Pressure Sensor (15-700kPa) – I2C – MPX5700AP
Whatsapp InquiryRated 0 out of 5
0 Reviews- Detection of physical quantities: Air pressure.
- Working voltage: 3.3~5.5V DC.
- Power dissipation: 0.06W(5)V.
- Epoxy resin integral components.
- Maximum error of 2.5%.
- Detection of physical quantities: Air pressure.
- Working voltage: 3.3~5.5V DC.
- Power dissipation: 0.06W(5)V.
- Epoxy resin integral components.
- Maximum error of 2.5%.
Sku: rz24315505
DFRobot Gravity Alcohol Sensor (0-5ppm)
Whatsapp InquiryRated 0 out of 5
0 Reviews- Operating Voltage: 3.3~5.5V DC.
- Power: 0.05W(5V).
- Signal Output: I2C, UART(0~3V).
- Factory calibrated, accurate data
- High sensitivity, low power
- Stable performance, anti-interference
- I2C and UART outputs
- Operating Voltage: 3.3~5.5V DC.
- Power: 0.05W(5V).
- Signal Output: I2C, UART(0~3V).
- Factory calibrated, accurate data
- High sensitivity, low power
- Stable performance, anti-interference
- I2C and UART outputs
Sku: rz24310664
Categories: Gas and Dust Sensor
DFRobot Gravity Analog Alcohol Sensor (MQ3) For Arduino
Whatsapp InquiryRated 0 out of 5
0 Reviews- Power supply needs: 5V
- Interface type: Analog
- Wide detecting scope
- Fast response and High sensitivity
- Simple drive circuit
- Power supply needs: 5V
- Interface type: Analog
- Wide detecting scope
- Fast response and High sensitivity
- Simple drive circuit
Sku: rz24310663
Categories: Gas and Dust Sensor
DFRobot Gravity Analog CH4 Gas Sensor (MQ4) For Arduino
Whatsapp InquiryRated 0 out of 5
0 Reviews- Power supply needs: 5V
- Interface type: Analog
- Pin Definition: 1-Output 2-VCC 3-GND
- High sensitivity to CH4£¬Natural gas
- Small sensitivity to alcohol, smoke
- Power supply needs: 5V
- Interface type: Analog
- Pin Definition: 1-Output 2-VCC 3-GND
- High sensitivity to CH4£¬Natural gas
- Small sensitivity to alcohol, smoke
Sku: rz24310501
Categories: Gas and Dust Sensor
DFRobot Gravity Analog CO/Combustible Gas Sensor (MQ9) For Arduino
Whatsapp InquiryRated 0 out of 5
0 Reviews- Model: DFRobot Gravity Analog CO/Combustible Gas Sensor (MQ9)
- power supply needs: 5V
- Interface type: Analog
- Sensor Type: Semiconductor
- Concentration: 10-1000ppm CO
- Model: DFRobot Gravity Analog CO/Combustible Gas Sensor (MQ9)
- power supply needs: 5V
- Interface type: Analog
- Sensor Type: Semiconductor
- Concentration: 10-1000ppm CO
Sku: rz24310126
Categories: Gas and Dust Sensor
DFRobot Gravity Analog CO2 Gas Sensor For Arduino (MG-811 Sensor)
Whatsapp InquiryRated 0 out of 5
0 Reviews- Model: DFRobot Gravity Analog CO2 Gas Sensor
- Heating Voltage: 6.0±0.1 V
- Heating Resistor: 30.0±5%Ω
- Heating Current: at 200mA
- Heating Power: 1200mW
- Model: DFRobot Gravity Analog CO2 Gas Sensor
- Heating Voltage: 6.0±0.1 V
- Heating Resistor: 30.0±5%Ω
- Heating Current: at 200mA
- Heating Power: 1200mW
Sku: rz24310665
Categories: Gas and Dust Sensor
DFRobot Gravity Analog Gas Sensor (MQ2) For Arduino
Whatsapp InquiryRated 0 out of 5
0 Reviews- Power supply needs: 5V
- Interface type: Analog
- Wide detecting scope
- Fast response and High sensitivity
- Simple drive circuit
- Power supply needs: 5V
- Interface type: Analog
- Wide detecting scope
- Fast response and High sensitivity
- Simple drive circuit
Sku: rz24310696
Categories: Gas and Dust Sensor
DFRobot Gravity Analog LPG Gas Sensor (MQ5) For Arduino
Whatsapp InquiryRated 0 out of 5
0 Reviews- Power supply needs: 5V
- Interface type: Analog
- Pin Definition: 1-Output 2-GND 3-VCC
- High sensitivity to LPG, natural gas, town gas
- Small sensitivity to alcohol, smoke
- Power supply needs: 5V
- Interface type: Analog
- Pin Definition: 1-Output 2-GND 3-VCC
- High sensitivity to LPG, natural gas, town gas
- Small sensitivity to alcohol, smoke
Sku: rz24310502
Categories: Gas and Dust Sensor
DFRobot Gravity Analog Propane Gas Sensor (MQ6) For Arduino
Whatsapp InquiryRated 0 out of 5
0 Reviews- Model: DFRobot Gravity Analog Propane Gas Sensor
- Circuit voltage: 5V±0.1 AC OR DC
- Heating voltage: 5V±0.1 ACOR DC
- Load resistance: 20KΩ
- Heater resistance: 33Ω±5% Room Tem
- Heating consumption of less than 750mw
- Model: DFRobot Gravity Analog Propane Gas Sensor
- Circuit voltage: 5V±0.1 AC OR DC
- Heating voltage: 5V±0.1 ACOR DC
- Load resistance: 20KΩ
- Heater resistance: 33Ω±5% Room Tem
- Heating consumption of less than 750mw
Sku: rz24315503
Categories: Gas and Dust Sensor
DFRobot Gravity CO Sensor (Calibrated) – I2C & UART
Whatsapp InquiryRated 0 out of 5
0 Reviews- ejection Gas: Carbon Monoxide (CO).
- Detection range: 0-1000ppm.
- Working Voltage: 3.3~5.5V DC.
- Working Current: <5mA.
- Output Signal: I2C, UART (0~3V), analog voltage.
- Working Temperature: -20~50℃.
- Working Humidity: 15~90%RH (non-condensing).
- Compatibility: Arduino, ESP32, Raspberry pi.
- Petrochemical carbon monoxide detection.
- ejection Gas: Carbon Monoxide (CO).
- Detection range: 0-1000ppm.
- Working Voltage: 3.3~5.5V DC.
- Working Current: <5mA.
- Output Signal: I2C, UART (0~3V), analog voltage.
- Working Temperature: -20~50℃.
- Working Humidity: 15~90%RH (non-condensing).
- Compatibility: Arduino, ESP32, Raspberry pi.
- Petrochemical carbon monoxide detection.
Sku: rz24310068
Categories: Gas and Dust Sensor
DFRobot Gravity Electrochemical Oxygen Sensor (0-100%Vol) – I2C
Whatsapp InquiryRated 0 out of 5
0 Reviews- Brand: DFRobot
- Product: Electrochemical Oxygen Sensor (0-100%Vol) – I2C
- Physical Quantity Detected: Oxygen concentration
- Measuring Range: 0~100%
- Working Voltage: 3.3~5.5V DC
- Brand: DFRobot
- Product: Electrochemical Oxygen Sensor (0-100%Vol) – I2C
- Physical Quantity Detected: Oxygen concentration
- Measuring Range: 0~100%
- Working Voltage: 3.3~5.5V DC
Sku: rz24315545
Categories: Gas and Dust Sensor
DFRobot Gravity ENS160 Air Quality Sensor
Whatsapp InquiryRated 0 out of 5
0 Reviews- Power Supply Voltage: 3.3 V~5.5 V
- Working Current: 29 mA
- Interface Mode: I2C
- Less than 3 minutes warm-up time, get data faster.
- Built-in algorithm, more accurate output.
- Power Supply Voltage: 3.3 V~5.5 V
- Working Current: 29 mA
- Interface Mode: I2C
- Less than 3 minutes warm-up time, get data faster.
- Built-in algorithm, more accurate output.
Sku: rz24310145
Categories: Gas and Dust Sensor
DFRobot Gravity Gravity Infrared CO2 Sensor For Arduino (400~5000 ppm)
Whatsapp InquiryRated 0 out of 5
0 Reviews- Brand: DFRobot
- product: Gravity Infrared CO2 Sensor For Arduino (400~5000 ppm)
- Detection Gas: Carbon Dioxide (CO2)
- Power Supply: 5.0±0.1V DC
- Peak Current: <125@5V
- Output Signal: PWM
- Brand: DFRobot
- product: Gravity Infrared CO2 Sensor For Arduino (400~5000 ppm)
- Detection Gas: Carbon Dioxide (CO2)
- Power Supply: 5.0±0.1V DC
- Peak Current: <125@5V
- Output Signal: PWM
Sku: rz2439922
Categories: Gas and Dust Sensor
DFRobot Gravity H2 Sensor (Calibrated) – I2C, UART and analog
Whatsapp InquiryRated 0 out of 5
0 Reviews-
- Factory calibrated, accurate measurement
- High sensitivity, low power consumption
- Excellent stability and anti-interference
- Three output modes: I2C, UART and analog
- Detection Gas: Hydrogen (H2)
- Working Voltage: 3.3~5.5V DC
- Working Current: <5mA
-
- Factory calibrated, accurate measurement
- High sensitivity, low power consumption
- Excellent stability and anti-interference
- Three output modes: I2C, UART and analog
- Detection Gas: Hydrogen (H2)
- Working Voltage: 3.3~5.5V DC
- Working Current: <5mA
Sku: rz24315468
Categories: Gas and Dust Sensor
DFRobot Gravity HCL Sensor (Calibrated) – I2C & UART
Whatsapp InquiryRated 0 out of 5
0 Reviews- Working Voltage: 3.3~5.5V DC
- Working Current: <5mA
- Output Signal: I2C, UART output
- Working Temperature: -20~50℃
- Working Humidity: 15~90%RH (non-condensing)
- Compatible with 3.3~5.5V main controllers
- Working Voltage: 3.3~5.5V DC
- Working Current: <5mA
- Output Signal: I2C, UART output
- Working Temperature: -20~50℃
- Working Humidity: 15~90%RH (non-condensing)
- Compatible with 3.3~5.5V main controllers
Sku: rz2439923
Categories: Gas and Dust Sensor
DFRobot Gravity HF Sensor (Calibrated) – I2C, UART and analog
Whatsapp InquiryRated 0 out of 5
0 Reviews- Brand: DFRobot
- Product: Gravity HF Sensor (Calibrated) – I2C & UART
- Detection Gas: Hydrogen fluoride (HF)
- Detection range: 0~10ppm
- Working Voltage: 3.3~5.5V DC
- Working Current: <5mA
- Brand: DFRobot
- Product: Gravity HF Sensor (Calibrated) – I2C & UART
- Detection Gas: Hydrogen fluoride (HF)
- Detection range: 0~10ppm
- Working Voltage: 3.3~5.5V DC
- Working Current: <5mA
Sku: rz24321792
Categories: Gas and Dust Sensor
DFRobot Gravity I2C Oxygen Sensor
Whatsapp InquiryRated 0 out of 5
0 Reviews- Detection of Gas: oxygen
- Operating Voltage: 3.3 to 5.5V DC
- Output Signal: I2C output
- Measurement Range: 0~25%Vol
- Detection of Gas: oxygen
- Operating Voltage: 3.3 to 5.5V DC
- Output Signal: I2C output
- Measurement Range: 0~25%Vol
Sku: rz2439921
Categories: Gas and Dust Sensor
DFRobot Gravity Industrial Grade Analog ORP Sensor Meter PRO
Whatsapp InquiryRated 0 out of 5
0 Reviews- Brand: DFRobot
- Product: Gravity Industrial Grade Analog ORP Sensor Meter PRO
- Input Voltage: 5V
- Input Signal: 0.5V – 4.5V
- Input Interface: 5.08mm/0.20″ Pluggable Connector
- Measuring Range: -2000mV ~ +2000mV
- Brand: DFRobot
- Product: Gravity Industrial Grade Analog ORP Sensor Meter PRO
- Input Voltage: 5V
- Input Signal: 0.5V – 4.5V
- Input Interface: 5.08mm/0.20″ Pluggable Connector
- Measuring Range: -2000mV ~ +2000mV
Sku: rz24310124
Categories: Gas and Dust Sensor
DFRobot Gravity Lab Grade Analog Dissolved Oxygen Sensor / Meter Kit For Arduino
Whatsapp InquiryRated 0 out of 5
0 Reviews- Brand: DFRobot
- Product: Gravity Lab Grade Analog Dissolved Oxygen Sensor / Meter Kit For Arduino
- Type: Galvanic Probe
- Detection Range: 0~20mg/L
- Response Time: Up to 98% full response, within 90 seconds (25℃)
- Pressure Range: 0~50PSI
- Brand: DFRobot
- Product: Gravity Lab Grade Analog Dissolved Oxygen Sensor / Meter Kit For Arduino
- Type: Galvanic Probe
- Detection Range: 0~20mg/L
- Response Time: Up to 98% full response, within 90 seconds (25℃)
- Pressure Range: 0~50PSI