3S 18650 Lithium Battery Capacity Indicator Module Level Tester LED

An Intelligent electricity quantity display board; slightly push trigger switch, it will auto power off after 3 seconds display.

LED  Indication:

• 25% –>First Light is on (Voltage: 3.1 V)
• 50% –>Second light is on (Voltage: 6.3 V)
• 75% –>Third light is on (Voltage: 9.4 V)
• 100% –>Fourth light is on (Voltage:12.6 V)

We have other Variants choose as per your requirement:

• 1S 18650 Lithium Battery Capacity Indicator Module Level Tester LED
• 2S 18650 Lithium Battery Capacity Indicator Module Level Tester LED
• 3S 18650 Lithium Battery Capacity Indicator Module Level Tester LED
• 4S 18650 Lithium Battery Capacity Indicator Module Level Tester LED

Features:

1. The intelligent power display panel
2. Static power consumption 2~3 mA, It’s negligible
3. Power indication(The color of the lamp is green)

Package Includes:

1 x 3S 18650 Lithium Battery Capacity Indicator Module Level Tester LED

To test all different kinds of batteries (18650 16340 14500 10440 Lithium Battery, AA, AAA, C, D, 9V, mini cell) Check the power level of all 1.5V, 3.7V, 9V, and 1.5V miniature cells Can quickly test the capacity of your battery Easy-to-read, digit indicates power level Test multiple sizes of batteries in one unit. (1.5V: AAA, HP16, MN2400, R03, AA, HP7, MN1500, UM3, C, HP11, MN1400, SP11, LR14, UM2, D, HP2, MN1300, SP2, R20, UM1; 9V: PP3, MN1604, 6F22, 006P, 18650 16340 14500 10440 Lithium Battery)

Features: 

1. The great small tool can tell you if your battery is good, low, or needs to be replaced.
2. A must buy for anyone who uses regular or rechargeable batteries on a regular basis
3. Simple but effective little battery tester checker, compact size and lightweight, easy to carry
4. Easy-to-read color-coded display with good, low and replace/recharge indicators
5. Test standard and rechargeable batteries: 9V, AA, AAA, etc.
6. No batteries are required to operate after the battery is docked with the positive and negative, and then guide the pointer to jump to the corresponding area

Package Includes:

1 x BT-168D Battery Tester Digital Display Battery Capacity Tester

This is a tiny and compact digital Battery Level Indicator with  LED Display. The 36V Two-Wire Digital Display Battery Level Indicator requires only a few minutes of configuration and is as simple as directly connecting wires to the source you want to measure and seeing the LED blink!!!!

The red wire is to connect to the positive pole, the black wire is to connect to the negative pole. No need to worry even if there is any connection mismatch of the wires, the electric circuit won’t be a boom because it features reverse polarity protection.

Features:

1. Battery type electricity quantity display.
2. Wide application fields: lithium battery.
3. Using Method: connect display board positive and negative port with tested battery positive and negative port, the digital tube will display real-time battery electricity quantity.
4. Digital Color: outline red, display block blue (when battery electricity quantity is full, it will be all on).

Package Includes:

1 x 36V Two-Wire Digital Display Battery Level Indicator

The Battery Capacity Voltage Meter can not only measure the battery voltage but also the capacity, show you with percentage. The battery monitor is designed with high-quality LCD, LCD screen with green backlit offers clear and bright display from every angle. Equipped with a PVC film, the surface is waterproof. Long service life button with comfortable hand feeling. Built with buckle, free of screw installation. Battery meter can be applied to portable mobile equipment, electron mobile, balance car, cleaning machine, measuring equipment, etc.

Setting Instruction:

1. Long press the Set key, power supply to the product, enter the setup interface
2. Press the Set key to select the battery specification (Lead acid battery(P), Lithium battery (L), Fe battery(F))
3. Short press the Function key to select the number of battery strings (increasing for set button, decreasing for function button)
4. Long press the Function key to set s mode.

Features: 

1. Double button design, easy to set up, can be set in just a few seconds.
2. Equipped with a switch, you can turn off the power, no power consumption after turning off.
3. Accurately display the battery power percentage, voltage, and intuitively grasp the battery usage status.
4. When the power value is lower than or equal to 20%, the backlight flashes an alarm.
5. Compatible with acid battery, lithium battery, iron lithium battery which can be set by yourself
6. Manually switch battery percentage/voltage / power off
7. Automatic recycling display battery capacity/voltage per 2 seconds (Settable)
8. 10s delay auto-off (Settable)
9. Double discharge curve selection (Settable

Package Includes:

1 x Power Display Meter

This is a tiny and compact digital Battery Level Indicator with  LED Display. The 48V Two-Wire Digital Display Battery Level Indicator requires only a few minutes of configuration and is as simple as directly connecting wires to the source you want to measure and seeing the LED blink!!!!

The red wire is to connect to the positive pole, the black wire is to connect to the negative pole. No need to worry even if there is any connection mismatch of the wires, the electric circuit won’t be a boom because it features reverse polarity protection.

Features:

1. Battery type electricity quantity display.
2. Wide application fields: lithium battery.
3. Using Method: connect display board positive and negative port with tested battery positive and negative port, the digital tube will display real-time battery electricity quantity.
4. Digital Color: outline red, display block blue (when battery electricity quantity is full, it will be all on).

Package Includes:

1 x 48V Two-Wire Digital Display Battery Level Indicator

The Battery Capacity Voltage Meter can not only measure the battery voltage but also the capacity, show you with percentage. The battery monitor is designed with a high-quality LCD, LCD screen with green backlit offers a clear and bright display from every angle. Equipped with a PVC film, the surface is waterproof. Long service life button with comfortable hand feeling. Built with buckle, free of screw installation. Battery meter can be applied to portable mobile equipment, electron mobile, balance car, cleaning machine, measuring equipment, etc.

Setting Instruction:

1. Long press the Set key, power supply to the product, enter the setup interface
2. Press the Set key to select the battery specification (Lead-acid battery(P), Lithium battery (L), Fe battery(F))
3. Short press the Function key to select the number of battery strings (increasing for the set button, decreasing for function button)
4. Long press the Function key to set s mode.

Features: 

1. Equipped with a switch, you can turn off the power, no power consumption after turning off.
2. Accurately display the battery power percentage, voltage, and intuitively grasp the battery usage status.
3. When the power value is lower than or equal to 20%, the backlight flashes an alarm.
4. Compatible with acid battery, lithium battery, iron lithium battery which can be set by yourself.
5. Double button design, easy to set up, can be set in just a few seconds.
6. Manually switch battery percentage/voltage/power off
7. Automatic recycling display battery capacity/voltage per 2 seconds (Settable)
8. 10s delay auto-off (Settable)
9. Double discharge curve selection (Settable)

Package Includes:

1 x Power Display Meter