This is a high-quality color CMOS camera module. Power the CM-32 module, hook up any display, monitor, or LCD screen with an RCA input, and get vivid color video at 728×488 resolution. The module is easily mountable and has a wide operating voltage (6V to 20V). Comes with high-quality optics, all the onboard circuitry to output RCA signal, and a cable harness.

Features:

1. 728 x 488 Resolution.
2. Fully Compatible with Raspberry Pi 3 Model B.
3. Small and lightweight camera module.
4. Plug-n-Play camera for Raspberry Pi.

Package Includes:

1 x CMOS Camera Module- 728×488 for Raspberry Pi

Raspberry Pi Camera Module, Embedded IR-CUT, Supports Night Vision.to test the camera you need to connect a HDMI display for previewing .The connectors of the DSI interface (display) and the CSI interface (camera) look the same, please take care of it when you connect the camera. The CSI interface is placed between the Audio jack and the HDMI port. the CSI connector of Pi zero is beside the Power interface. If you use Compute Module, please check the actual place of the carrier board.

Features:

1. Raspberry Pi Camera, supports all revisions of the Pi
2. Embedded removable IR-CUT filter, eliminating color distortion in the daylight
3. Comes with infrared LED  supports night vision
4. 5 megapixel OV5647 sensor
5. Adjustable focus distance
6. Supports connecting infrared LED and/or fill flash LED

Package Include:

1 X RPi IR-CUT Camera

2 X Infrared LED Board

1 X 15-pin FFC (opposite sides contact)

The Newest IMX219 Low Distortion M12 Mount Camera Module for Raspberry Pi is mainly designed for Raspberry Pi. The highlight of this camera is its very low distortion (<3%) of the lens. No less than the Raspberry Pi official camera V2, this camera module is also equipped with a high-definition IMX219 8MP sensor for shooting HD video and still images.

It is excellent in image quality, color fidelity, and low light, supports 1080p30, 720p60, and VGA90 video modes, and supports still capture.

For beginners, this is a very easy camera module to get started; for advanced players, this camera module has more knowledge that you should explore and DIY.

Useful link:

1. To use this camera, please follow this tutorial for hardware  and software setup.
2. After  software setup, you need to follow this tutorial to test the camera.

Features:

This 5MP NOIR pi video camera is designed for both daylight and night vision photography with a build-in motorized(switchable) IR cut filter and two infrared LED illuminator boards. The motorized IR cut filter can be switched ON/OFF automatically, and the infrared LEDs are automatically ON/OFF according to the light environment. The camera is fully supported all the Raspberry Pi board versions including Pi 4, Pi 3, and Pi Zero. It can be widely used in wildlife photography, agriculture NDVI applications and etc.

Download link:

1. To use this camera, it is necessary to do hardware and software setup. To do  both, please follow the instructions given in the link .

Features:

1.  Switchable IR Cut Filter: On for daylight color accuracy, off for IR night vision.
2.  Software controllable
3.  IR Corrected Lens: Low dispersion glass that greatly reduces Focus Shift and Chromatic Aberration, and focus light of different wavelengths on to an image   plane at the same location unlike the other lenses
4.  IR LED Illuminator: Triggered by the light sensor that decides whether the light   condition is poor and needs to be improved

Specifications:

1. Sensor:
   1. Sensor size: 1/4” (OV5647)
   2. Resolution: 5MP 2592×1944
   3. Video: 1080p 30 fps, 720p 60fps, 480p 90fps
2. Lense:
   1. Focal Length: 2.25 mm (You can screw the lens for focusing*)
   2. Horizontal Field of View (HFOV): 85°
   3. Thread Size: M12×P0.5
3. Camera Board
4. 1. 3V power output for IR LED
   2. Built-in Motorized IR Cut filter
   3. Dimension: 36×36 mm, 4 mounting holes

Package Includes:

1× Camera Board with 5MP OV5467 sensor and IR corrected lens

2× IR LED illuminator

2× Heat Sinks for IR Lights

1× 150 mm/5.9” FFC cable for Model A and B

1× 150 mm/5.9” FPC cable for Pi Zero models

1 x Acrylic Stand Case

The MINI OV5647 Wide angle camera is a custom-designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board’s upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing with cameras.

The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data. The camera is connected to the BCM2835 processor on the Pi via the CSI bus, a higher bandwidth link that carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi.
The camera is supported in the latest version of Raspbian, Raspberry Pi’s preferred operating system.

Applications:

• Cellular phones, PDAs, Toys
• Other battery-powered products
• Where the official module fails in terms of focusing and Field of View,etc.

Features:

1. Lens holder: M12x0.5
2. 5MPixel sensor
3. Integral IR filter
4. Max frame rate: 30fps
5. Connection by flat ribbon cable to 15-pin MIPI Camera Serial Interface (CSI) connector S5 on Raspberry Pi computer board
6. The Camera Lens for Raspberry Pi Camera Board is LN060
7. OmniVision 5647 sensor in a fixed-focus module with replaceable Lense

Specifications:

• Sensor
  – Sensor size: 1/4” (OV5647)
  – Resolution: 5MP 2592×1944
  – Video: 1080p 30 fps, 720p 60fps, 480p 90fps
• Lens
  – Focal Length: 1.3mm (You can screw the lens for focusing)
  – Horizontal Field of View (HFOV): 155°
  – Thread Size: M12×P0.5
• Camera Board
  – 3V3,GND,FREX,STROBE,VSYNC
  – Dimension: 25×24 mm, 4 mounting holes

• Peak Current: 300mA

Package Includes:

1 x 5 Megapixels OV5647 Sensor Camera Module

1 x 15cm 15pin FPC cable

If you use the official V1 camera (ov5647), V2 camera (IMX219), and the HQ camera (IMX477), you can just plug in the camera and play.
If you use third-party cameras, the support camera size is as below and please use libcamera stack.
You need to modify the config.txt file and add the configure line according to the camera type.

With this capability, device manufacturers can implement a monochrome or NIR camera device and reduce memory use by using the Y8 stream format. A monochrome camera can serve as the underlying physical camera of a logical multi-camera device to achieve better low-light noise characteristics

Useful Link:

For the configuration, setting click on the link

Features:

1. Direct Connect To Raspberry Pi Different Variants Including 4B/3B+/3A+/3B/2B/B+/A+,
2. Extra FPC Cable Is Required For Zero / Zero 2 W Series
3. Easy to use
4. Simple connection
5. Small in size
6. Weight: 12g
7. Color: Black

Packages Includes:

1 x Waveshare OV9281-160 1MP Mono Camera for Raspberry Pi Global Shutter