PIXHAWK 2.4.8 Combo Kit

SKU: 792140
In Stock

₹17,350.00

1. The advanced 32-bit ARM CortexM4 high-performance processor can run NuttX RTOS real-time operating system.
2. 14 PWM/servo output.
3. Bus interface (UART, I2C, SPI, CAN).
4. The integrated backup power and backup controller failsafe.
5. Provide automatic and manual modes.
6. Provide redundant power input and failover.
7. Multicolor LED lights.
8. Provide a multi-tone buzzer Interface.
9. Micro SD recording flight data.

In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Category:
Tags:

Description

This PIXHAWK 2.4.8 Full Combo Kit consists of all in one required product for the drone flight controller. find all product included in this kit at below package includes.

PIXHAWK PX4 2.4.8 Flight Controller is a high-performance autopilot-on-module suitable for fixed-wing, multi-rotors, helicopters, cars, boats, and any other robotic platform that can move. It is targeted towards high-end research, amateur and industry need, and combines the functionality of the PX4FMU + PX4IO.

A new generation Ublox GPS NEO-M8N, with low power consumption and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy; support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol, and mode or more.

The GPS Folding Antenna Base mount comes will a laser-cut adhesive pad to quickly attached your GPS module, while the mount itself can be fixed to your craft using the base plate M3 hole, or the cross slides.

 

 

Note: Product image may vary from the actual product.

Specifications and Features:

Pixhawk V2.4.8 Flight board:

  1. The advanced 32-bit ARM CortexM4 high-performance processors can run NuttX RTOS real-time operating system.
  2. 14 PWM / servo output.
  3. Bus interface (UART, I2C, SPI, CAN).
  4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe.
  5. Provide automatic and manual modes.
  6. Provide redundant power input and failover.
  7. Multicolor LED lights.
  8. Provide a multi-tone buzzer Interface.
  9. Micro SD recording flight data.

Processor:

  1. 32bit STM32F427 Cortex M4 core with FPU.
  2. 168 MHz.
  3. 128 KB RAM.
  4. 2 MB Flash.
  5. 32-bit STM32F103 failsafe co-processor.

Sensors:

  1. ST Micro L3GD20H 16 bit gyroscope.
  2. ST Micro X4HBA 303H 14-bit accelerometer/magnetometer.
  3. Invensense MPU 6000 3-axis accelerometer/gyroscope.
  4. MEAS MS5607 barometer.

Interfaces:

  1. 5x UART (serial ports), one high-power capable, 2x with HW flow control.
  2. 2x CAN (one with an internal 3.3V transceiver, one on expansion connector).
  3. Spektrum DSM / DSM2 / DSM-X® Satellite compatible input.
  4. Futaba S.BUS® compatible input and output.
  5. PPM sum signal input.
  6. RSSI (PWM or voltage) input.
  7. I2C.
  8. SPI.
  9. 3.3 and 6.6V ADC inputs.
  10. Internal micro USB port and external micro USB port extension.

PIXHAWK PPM Encoder Module:

  1. Support the input channels: 8.
  2. Output: PPM SUM × 1 / MUX × 1.

Glass Fiber Flight Controller Anti-vibration/Shock absorber Set:

  1. Color: Black
  2. Material: Glass-fiber
  3. Suit for the different open-source flight controllers, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4

NEO-M8N GPS Module:

  1. Receiver type 72-channel Ublox M8 engine.
  2. GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1.
  3. SBAS L1 C/A: WAAS, EGNOS, MSAS.
  4. Galileo-ready E1B/C (NEO-M8N).
  5. Nav. update rate1 Single GNSS: up to 18 HZ.
  6. Concurrent GNSS: up to 10 Hz.
  7. Position accuracy2 2.0 m CEP.
  8. Acquisition2 Cold start: 26 s.
  9. Aided starts: 2 s.
  10. Reacquisition: 1.5 s.
  11. Sensitivity2 Tracking & Nav: –167 dBm.
  12. Cold start: –148 dBm.
  13. Hot starts: –156 dBm.
  14. Assistance AssistNow GNSS Online.
  15. Assist Now GNSS Offline (up to 35 days)3.
  16. Assist Now Autonomous (up to 6 days).
  17. OMA SUPL & 3GPP compliant
  18. Oscillator TCXO (NEO-M8N/Q).
  19. Crystal (NEO-M8M).
  20. RTC crystal Built-In.
  21. Noise figure On-chip LNA (NEO-M8M). Extra LNA for.
  22. lowest noise figure (NEO-M8N/Q).
  23. Anti-jamming Active CW detection and removal.
  24. An extra onboard SAW bandpass filter (NEO-M8N/Q).
  25. Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N).
  26. Supported antennas Active and passive.
  27. Odometer Travelled distance.
  28. Data-logger For position, velocity, and time (NEO-M8N).

GPS Folding Base Antenna set:

  1. Material: CNC Aluminum alloy, carbon glass fiber rod
  2. Mounting rod diameter: 4mm
  3. length of rod: 14 cm.
  4. GPS plate diameter: 40 mm.
  5. Base plate diameter: 35 mm
  6. Mounting hole spacing: 16-35mm
  7. Weight: 20g
  8. Colour: Anodised black
  9. Note: Adhesive Pad is not included.

APM 2.5.2/2.6/2.8 Pixhawk Power Module V1.0:

  1. Max input voltage: 28V
  2. Max current sensing: 90A
  3. Voltage and current measurement configured for 5V ADC
  4. Switching regulator outputs 5.3V and 3A max
  5. 6-pos DF13 cable plugs directly to APM 2.5’s ‘PM’ connector
  6. Support 6S battery.

Package Includes:

1 x Pixhawk V2.4.8 Flight board with Original Shell.

1 x 4GB TF card(IO firmware has written).

3 x Connecting Cables.

1 x Pixhawk PPM Encoder Module.

1x JR plug 10P input end of the cable 100mm.

1 x JR plug 4P output end of the cable 100mm.

1 x Glass Fiber Flight Controller Anti-vibration/Shock absorber Set.

1x NEO-M8N GPS Module with translucent Shell.

2 x cables (APM/PIX).

1 x GPS Folding Base Antenna set.

1 x APM 2.5.2/2.6/2.8 Pixhawk Power Module.

1 x I2C Splitter with Cable

1 x OSD OLED Display

Quick Comparison

SettingsPIXHAWK 2.4.8 Combo Kit removeAssassin 5 inch 222mm Drone Racing frame Kit removeRobocat 270 Racing Quadcopter Frame removeHolybro Pixhawk 4 Neo M8N GPS Module removeMark4 7inch 295mm Carbon Fiber Frame Kit removeDYS F2206 Drone Power Combo Set (Original) remove
NamePIXHAWK 2.4.8 Combo Kit removeAssassin 5 inch 222mm Drone Racing frame Kit removeRobocat 270 Racing Quadcopter Frame removeHolybro Pixhawk 4 Neo M8N GPS Module removeMark4 7inch 295mm Carbon Fiber Frame Kit removeDYS F2206 Drone Power Combo Set (Original) remove
Image
SKU79214010109429748709144721010940867304
Rating
Price₹17,350.00₹3,159.00₹1,929.00₹6,799.00₹2,329.00₹6,940.00
Stock
In Stock
In Stock
Out of stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockOut of stockIn StockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Read more

Add to cart

Add to cart

Add to cart

Description

1. The advanced 32-bit ARM CortexM4 high-performance processor can run NuttX RTOS real-time operating system.
2. 14 PWM/servo output.
3. Bus interface (UART, I2C, SPI, CAN).
4. The integrated backup power and backup controller failsafe.
5. Provide automatic and manual modes.
6. Provide redundant power input and failover.
7. Multicolor LED lights.
8. Provide a multi-tone buzzer Interface.
9. Micro SD recording flight data.

  1. Model: Assassin
  2. Wheelbase: 222mm
  3. Material: Full Carbon Fiber
  4. Arm Thickness:5 mm
  5. Weight: 210 gm
  1. Approx 270mm motor to motor
  2. Material – carbon fibre
  3. Removable canopy made from shock-absorbing PC material
  4. Flying Weight -410-430g (battery excluded)
  5. Model net weight: 210 g± 3g
  1. Ublox Neo-M8N module
  2. Industry-leading 167 dBm navigation sensitivity
  3. Cold starts: 26s
  4. LNA MAX2659ELT+
  5. 25 x 25 x 4 mm ceramic patch antenna
  6. Low noise 3.3V regulator
  7. 26cm Pixhawk4 compatible 10-pin cable included
  1. Model: MARK4
  2. Wheelbase: 295mm
  3. Material: Full Carbon Fiber
  4. Arm Thickness:5 mm
  5. Weight: 150 gm
  1. Pack contains quality products
  2. All products are tested and ready to perform
  3. All essential equipment required to build a Quadcopter is included in this advanced combo pack.
Content

This PIXHAWK 2.4.8 Full Combo Kit consists of all in one required product for the drone flight controller. find all product included in this kit at below package includes.

PIXHAWK PX4 2.4.8 Flight Controller is a high-performance autopilot-on-module suitable for fixed-wing, multi-rotors, helicopters, cars, boats, and any other robotic platform that can move. It is targeted towards high-end research, amateur and industry need, and combines the functionality of the PX4FMU + PX4IO.

A new generation Ublox GPS NEO-M8N, with low power consumption and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy; support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol, and mode or more.

The GPS Folding Antenna Base mount comes will a laser-cut adhesive pad to quickly attached your GPS module, while the mount itself can be fixed to your craft using the base plate M3 hole, or the cross slides.

 

 

Note: Product image may vary from the actual product.

Specifications and Features:

Pixhawk V2.4.8 Flight board:

  1. The advanced 32-bit ARM CortexM4 high-performance processors can run NuttX RTOS real-time operating system.
  2. 14 PWM / servo output.
  3. Bus interface (UART, I2C, SPI, CAN).
  4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe.
  5. Provide automatic and manual modes.
  6. Provide redundant power input and failover.
  7. Multicolor LED lights.
  8. Provide a multi-tone buzzer Interface.
  9. Micro SD recording flight data.

Processor:

  1. 32bit STM32F427 Cortex M4 core with FPU.
  2. 168 MHz.
  3. 128 KB RAM.
  4. 2 MB Flash.
  5. 32-bit STM32F103 failsafe co-processor.

Sensors:

  1. ST Micro L3GD20H 16 bit gyroscope.
  2. ST Micro X4HBA 303H 14-bit accelerometer/magnetometer.
  3. Invensense MPU 6000 3-axis accelerometer/gyroscope.
  4. MEAS MS5607 barometer.

Interfaces:

  1. 5x UART (serial ports), one high-power capable, 2x with HW flow control.
  2. 2x CAN (one with an internal 3.3V transceiver, one on expansion connector).
  3. Spektrum DSM / DSM2 / DSM-X® Satellite compatible input.
  4. Futaba S.BUS® compatible input and output.
  5. PPM sum signal input.
  6. RSSI (PWM or voltage) input.
  7. I2C.
  8. SPI.
  9. 3.3 and 6.6V ADC inputs.
  10. Internal micro USB port and external micro USB port extension.

PIXHAWK PPM Encoder Module:

  1. Support the input channels: 8.
  2. Output: PPM SUM × 1 / MUX × 1.

Glass Fiber Flight Controller Anti-vibration/Shock absorber Set:

  1. Color: Black
  2. Material: Glass-fiber
  3. Suit for the different open-source flight controllers, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4

NEO-M8N GPS Module:

  1. Receiver type 72-channel Ublox M8 engine.
  2. GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1.
  3. SBAS L1 C/A: WAAS, EGNOS, MSAS.
  4. Galileo-ready E1B/C (NEO-M8N).
  5. Nav. update rate1 Single GNSS: up to 18 HZ.
  6. Concurrent GNSS: up to 10 Hz.
  7. Position accuracy2 2.0 m CEP.
  8. Acquisition2 Cold start: 26 s.
  9. Aided starts: 2 s.
  10. Reacquisition: 1.5 s.
  11. Sensitivity2 Tracking & Nav: –167 dBm.
  12. Cold start: –148 dBm.
  13. Hot starts: –156 dBm.
  14. Assistance AssistNow GNSS Online.
  15. Assist Now GNSS Offline (up to 35 days)3.
  16. Assist Now Autonomous (up to 6 days).
  17. OMA SUPL & 3GPP compliant
  18. Oscillator TCXO (NEO-M8N/Q).
  19. Crystal (NEO-M8M).
  20. RTC crystal Built-In.
  21. Noise figure On-chip LNA (NEO-M8M). Extra LNA for.
  22. lowest noise figure (NEO-M8N/Q).
  23. Anti-jamming Active CW detection and removal.
  24. An extra onboard SAW bandpass filter (NEO-M8N/Q).
  25. Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N).
  26. Supported antennas Active and passive.
  27. Odometer Travelled distance.
  28. Data-logger For position, velocity, and time (NEO-M8N).

GPS Folding Base Antenna set:

  1. Material: CNC Aluminum alloy, carbon glass fiber rod
  2. Mounting rod diameter: 4mm
  3. length of rod: 14 cm.
  4. GPS plate diameter: 40 mm.
  5. Base plate diameter: 35 mm
  6. Mounting hole spacing: 16-35mm
  7. Weight: 20g
  8. Colour: Anodised black
  9. Note: Adhesive Pad is not included.

APM 2.5.2/2.6/2.8 Pixhawk Power Module V1.0:

  1. Max input voltage: 28V
  2. Max current sensing: 90A
  3. Voltage and current measurement configured for 5V ADC
  4. Switching regulator outputs 5.3V and 3A max
  5. 6-pos DF13 cable plugs directly to APM 2.5’s ‘PM’ connector
  6. Support 6S battery.

Package Includes:

1 x Pixhawk V2.4.8 Flight board with Original Shell.

1 x 4GB TF card(IO firmware has written).

3 x Connecting Cables.

1 x Pixhawk PPM Encoder Module.

1x JR plug 10P input end of the cable 100mm.

1 x JR plug 4P output end of the cable 100mm.

1 x Glass Fiber Flight Controller Anti-vibration/Shock absorber Set.

1x NEO-M8N GPS Module with translucent Shell.

2 x cables (APM/PIX).

1 x GPS Folding Base Antenna set.

1 x APM 2.5.2/2.6/2.8 Pixhawk Power Module.

1 x I2C Splitter with Cable

1 x OSD OLED Display

The Assassin 5 inch 222mm Drone Racing frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. It is known for its toughness and durability.

Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

The frame has a wheelbase of 222mm. It features a very large area on the mainframe for mounting cameras and other accessories. 

Its longer top and bottom plate allows easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

 

 

Features:

  1. Lightweight and Durable.
  2. Made by super strong and advanced engineering material.
  3. The frame has excellent strength.
  4. Equips vibration-free mounting bracket for FPV camera.

Package Includes:

1 x Assassin 5 inch 222mm Drone Racing frame Kit

Kit Includes:

1 x Assassin 5 inch 222mm Drone Racing frame and Accessories

1 x black zip ties(10 pcs)

Robocat was designed with aerodynamics in mind. The carbon fiber we use allows us to create a sturdy but lightweight structure. For the Canopy, we took into account the ease of maintenance. The design incorporates a hinge feature allowing for easy access to the electronic insides.
With an eye-catching form paired with a streamlined Canopy, high speeds are achievable due to the low drag. The Canopy comes in different colors suitable for various situations. The Canopy is made from shock-absorbing PC material. If you have FPV racing on your mind, then this is the number one quadcopter for you.
Build from pure carbon fiber, 1.5mm thick fuselage & 3mm thick arms, Robocat 270 Racing Quadcopter Frame can be fitted with 1806 to 2206 sized motors, 12A speed controller, CC3D & Mini KK2.1 Flight controller, 3 to 4S 1500mah Lipo battery, 32mm CCTV Camera, 5.8G video Transmitter, 5 inches propeller.

Note: The cover on the frame comes in different colors, we will ship it according to availability.

Features:

  1. 270 size FPV racing quad frame
  2. Super tough and durable all 4k weave carbon fiber construction
  3. Eye-catching Lexan body shell design available in several colors
  4. Unique rotating frame design allows easy access to electronics
  5. Plenty of space for electronics and FPV equipment
  6. Individual component mounting options for a neat and tidy install
  7. Pre-angled FPV camera mount for high-speed flight

Package Includes:

1 x Robocat 270 Racing Quadcopter Frame

Holybro introduces this new GPS for you to work with PIXHAWK4. It has UBLOX M8N module on it, as well as IST8310 compass and tri-coloured LED indicator. Additionally, the Safety switch on it will make the connection more convenient and simple.

Out of the box, this GPS module comes with Mounting Stand with two (70mm & 140mm ) carbon rods.

Pixhawk  4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and the PX4 team, optimized to run the full Dronecode stack and comes preinstalled with the latest PX4 firmware (v1.7).

It features the currently most advanced processor technology from ST Microelectronics, sensor technology from Bosch, InvenSense and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.

Features and Specifications:

  1. Ublox Neo-M8N module
  2. Industry-leading 167 dBm navigation sensitivity
  3. Cold starts: 26s
  4. LNA MAX2659ELT+
  5. 25 x 25 x 4 mm ceramic patch antenna
  6. Rechargeable Farah capacitance
  7. Low noise 3.3V regulator
  8. Fix indicator LEDs
  9. Protective case
  10. 26cm Pixhawk4 compatible 10-pin cable included
  11. Diameter 50mm total size, 32 grams with the case.

Package Includes:

1 x NEO-M8 with compass module
1 x ‘X’ type folding pedestal mount with fitting screws
1 x Carbon rod 70mm & 140mm

The Mark4  7Inch 295mm Carbon Fiber Racing Frame. This frame is built specifically to tackle the problems in FPV Racing and video recording with quadcopters. It is known for its toughness and durability.

Carbon fiber is mostly an accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance. The frame is lightweight and possesses thick arms, so as to give them good mechanical strength.

The frame has a wheelbase of 295mm. It features a very large area on the mainframe for mounting cameras and other accessories. This frame supports 19.3mm board cams as well as cams in cases with mounting brackets.

Its longer top and bottom plate allows easy mounting of HD cameras and batteries. so more spacious room for all kinds of electronics!!!

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

 

 

Features:

  1. Lightweight and Durable.
  2. Made by super strong and advanced engineering material.
  3. The frame has excellent strength.
  4. Equips vibration-free mounting bracket for FPV camera.

Package Includes:

1 x Mark4 7inch 295mm Carbon Fiber Frame Kit

This F2206 Drone Power Combo Set is the best low price drone motors and accessories combo set available in the market.

If you are about to have a great flying drone or quadcopter designed all by you. OKAY GREAT, But having a limited budget ??

Then here is the best deal for you!!!!

This is our best market cracking Racing/ fixed-wing/ Brushless/ UAV Motor when it comes to Robu.in bestselling drone motors. The uniqueness of this RC BLDC Motor lies in its low cost and highly satisfying performance on the fly.

BE2206 Motor

These Racing/ fixed-wing/ Brushless/ UAV Motor for drones are imported from China. Our quality control team then test some of the random motors from each batch before setting them on sale. This 1950kv Racing/ fixed-wing/ Brushless/ UAV Motor is equipped with a solid metal case which makes it reliable and durable.

BL30A BLHeli firmware ESC

The new DYS BLHeli series speed controllers are quickly becoming the most popular ESCs amongst drone racing enthusiasts and with good reason. They are ultra-small, very light and arrive flashed with the best multirotor firmware out there, namely BLHeli. Being specifically designed for multirotor use, they are tuned to deliver an ultra-fast throttle response, which helps to improve stability and give you that much sought-after locked-in feeling!

ABS6045 Two-Blade Propellers

These Two-Blade Propellers made up of  Glass Fiber Nylon is high-quality propellers specially designed for high-Speed racing multi-copters.

With a Lightweight blade and less moment of inertia, these PROPS have smooth turning performance and fast response. The professional pneumatic outlook design and high precision production quality provide a strong thrust for Props.

The Advance Polycarbonate material provides good dash and bending resistance and hence it this propeller gives the best efficiency and ultra-durability.

Note:  The Propeller dimensions and weight may have  ±2% error.

We at Robu. passionately deal in this Multicopter/Drone area to encourage and help many DIY makers by supplying every essential product to build and enrich Multicopters/Drones.

 

 

Specifications:

BE2206 Motor

  1. KV: 1950
  2. Configuration: NP
  3. Stator Diameter: 22.0mm
  4. Stator Length: 6.0mm
  5. Shaft Diameter: 3.0mm
  6. Motor Dimensions (Dia.*Len): Φ27×18.5mm
  7. Weight (g): 30g
  8. of Cells(Lipo): 2-3S
  9. Max Continuous Current (A): 14.7A
  10. Max Continuous Power (W): 163.0W
  11. Internal resistance: 0.098Ω

ESC:

  1. Model: BL30A / SN30A
  2. Battery: 6-22.2V (2-6S Lipo)
  3. Current Rating: 30amp / 35amp burst
  4. BEC: No (OPTO)
  5. Signal frequency: 20-500Hz
  6. Output PWM frequency: 18KHz
  7. Firmware: BLHeli (also compatible with SimonK)
  8. Size: 45×16.6×5.5mm
  9. Weight: 14.5g

ABS6045 Two-Blade Propellers

  1. Hi-Performance Prop FPV 2 blade bullnose propeller ABS6045 CW/CCW
  2. Material: PC
  3. Size: 6 x 4.5
  4. Hub inner diameter(ID): M5
  5. Hub thickness: 7mm
  6. Weight: 3.8g/pcs
  7. Colour: Green and Orange

Features:

BE2206 Motor

  1. New design with imported NMB bearing
  2. Powerful with 680g thrust.
  3. Special design for the FPV racer champions

BL30A BLHeli firmware ESC

  1. Designed specifically for multi-rotors
  2. Tiny form factor and low weight
  3. Preloaded with BLHeli, OneShot125 & Dampened Light (active braking) supported
  4. Fast throttle response – high 500Hz maximum refresh rate compatible with all flight controllers
  5. Twisted signal cable reducing the crosstalk during signal transfer
  6. Feature all new ultra-low resistance MOSFETs for superior current handling
  7. Thick PCB for better heat dissipation
  8. High-performance capacitor filter

ABS6045 Two-blade Propellers

  1. Comes with thin and wide blades
  2. 6045(6×4.5) Propellers features an epoxy resin cover.
  3. Quick to release, quick to attach
  4. New design propellers, with greater aerodynamic efficiency, good lifting capacity.

Package Includes :

4 x BE2206 1950KV CW CCW KV Brushless Motor
4 x Set of Motor Accessories
4 x BL30A BLheli firmware ESC
6 x ABS6045 Propellers(3CW, 3CCW).

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Model

Assassin
Compatible Propellers Size (inch)

5.1
Wheelbase (mm)

222
Arm Size (L x W) mm

120×20
Thickness (mm)

5
Weight (gm)

210
Frame Diameter

270mm
Material

Carbon Fiber + Aluminum
Frame Weight

190g
Motor Mount Bolt Hole spacing

16, 19mm
Model

Mark4
Compatible Propellers Size (inch)

5
Arm Size (L x W) mm

155×20
Thickness (mm)

5
Weight (gm)

150